return rc;
}
-struct bus_type i2c_bus_type = {
- .name = "i2c",
- .match = i2c_device_match,
- .suspend = i2c_bus_suspend,
- .resume = i2c_bus_resume,
-};
-
static int i2c_device_probe(struct device *dev)
{
return -ENODEV;
return 0;
}
+struct bus_type i2c_bus_type = {
+ .name = "i2c",
+ .match = i2c_device_match,
+ .probe = i2c_device_probe,
+ .remove = i2c_device_remove,
+ .suspend = i2c_bus_suspend,
+ .resume = i2c_bus_resume,
+};
+
void i2c_adapter_dev_release(struct device *dev)
{
struct i2c_adapter *adap = dev_to_i2c_adapter(dev);
.owner = THIS_MODULE,
.name = "i2c_adapter",
.bus = &i2c_bus_type,
- .probe = i2c_device_probe,
- .remove = i2c_device_remove,
};
static void i2c_adapter_class_dev_release(struct class_device *dev)
list_for_each_safe(item, _n, &adap->clients) {
client = list_entry(item, struct i2c_client, list);
- /* detaching devices is unconditional of the set notify
- * flag, as _all_ clients that reside on the adapter
- * must be deleted, as this would cause invalid states.
- */
if ((res=client->driver->detach_client(client))) {
dev_err(&adap->dev, "detach_client failed for client "
"[%s] at address 0x%02x\n", client->name,
/* add the driver to the list of i2c drivers in the driver core */
driver->driver.owner = owner;
driver->driver.bus = &i2c_bus_type;
- driver->driver.probe = i2c_device_probe;
- driver->driver.remove = i2c_device_remove;
res = driver_register(&driver->driver);
if (res)
/* Have a look at each adapter, if clients of this driver are still
* attached. If so, detach them to be able to kill the driver
* afterwards.
- *
- * Removing clients does not depend on the notify flag, else
- * invalid operation might (will!) result, when using stale client
- * pointers.
*/
list_for_each(item1,&adapters) {
adap = list_entry(item1, struct i2c_adapter, list);
}
}
+s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command,
+ u8 length, u8 *values)
+{
+ union i2c_smbus_data data;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = length;
+ memcpy(data.block + 1, values, length);
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_I2C_BLOCK_DATA, &data);
+}
+
/* Simulate a SMBus command using the i2c protocol
No checking of parameters is done! */
static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
EXPORT_SYMBOL(i2c_smbus_write_word_data);
EXPORT_SYMBOL(i2c_smbus_write_block_data);
EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
+EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus main module");