ide: make legacy IDE VLB modules check for the "probe" kernel params (v2)

[powerpc.git] / drivers / ide / Kconfig

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 3f82805..5d134bb 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -167,6 +167,13 @@ config BLK_DEV_IDECS
          Support for Compact Flash cards, outboard IDE disks, tape drives,
          and CD-ROM drives connected through a PCMCIA card.
 
+config BLK_DEV_DELKIN
+       tristate "Cardbus IDE support (Delkin/ASKA/Workbit)"
+       depends on CARDBUS && PCI
+       help
+         Support for Delkin, ASKA, and Workbit Cardbus CompactFlash
+         Adapters.  This may also work for similar SD and XD adapters.
+
 config BLK_DEV_IDECD
        tristate "Include IDE/ATAPI CDROM support"
        ---help---
@@ -264,6 +271,13 @@ config BLK_DEV_IDESCSI
          If both this SCSI emulation and native ATAPI support are compiled
          into the kernel, the native support will be used.
 
+config BLK_DEV_IDEACPI
+       bool "IDE ACPI support"
+       depends on ACPI
+       ---help---
+         Implement ACPI support for generic IDE devices. On modern
+         machines ACPI support is required to properly handle ACPI S3 states.
+
 config IDE_TASK_IOCTL
        bool "IDE Taskfile Access"
        help
@@ -369,6 +383,9 @@ config BLK_DEV_OFFBOARD
 config BLK_DEV_GENERIC
        tristate "Generic PCI IDE Chipset Support"
        depends on BLK_DEV_IDEPCI
+        help
+          This option provides generic support for various PCI IDE Chipsets
+          which otherwise might not be supported.
 
 config BLK_DEV_OPTI621
        tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)"
@@ -606,6 +623,11 @@ config BLK_DEV_PIIX
          the kernel to change PIO, DMA and UDMA speeds and to configure
          the chip to optimum performance.
 
+config BLK_DEV_IT8213
+       tristate "IT8213 IDE support"
+       help
+        This driver adds support for the ITE 8213 IDE controller.
+
 config BLK_DEV_IT821X
        tristate "IT821X IDE support"
        help
@@ -742,6 +764,11 @@ config BLK_DEV_VIA82CXXX
          This allows the kernel to change PIO, DMA and UDMA speeds and to
          configure the chip to optimum performance.
 
+config BLK_DEV_TC86C001
+       tristate "Toshiba TC86C001 support"
+       help
+       This driver adds support for Toshiba TC86C001 GOKU-S chip.
+
 endif
 
 config BLK_DEV_IDE_PMAC
@@ -773,6 +800,14 @@ config BLK_DEV_IDEDMA_PMAC
          to transfer data to and from memory.  Saying Y is safe and improves
          performance.
 
+config BLK_DEV_IDE_CELLEB
+       bool "Toshiba's Cell Reference Set IDE support"
+       depends on PPC_CELLEB
+       help
+         This driver provides support for the built-in IDE controller on
+         Toshiba Cell Reference Board.
+         If unsure, say Y.
+
 config BLK_DEV_IDE_SWARM
        tristate "IDE for Sibyte evaluation boards"
        depends on SIBYTE_SB1xxx_SOC
@@ -988,7 +1023,7 @@ config BLK_DEV_4DRIVES
 config BLK_DEV_ALI14XX
        tristate "ALI M14xx support"
        help
-         This driver is enabled at runtime using the "ide0=ali14xx" kernel
+         This driver is enabled at runtime using the "ali14xx.probe" kernel
          boot parameter.  It enables support for the secondary IDE interface
          of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
          I/O speeds to be set as well.  See the files
@@ -998,7 +1033,7 @@ config BLK_DEV_ALI14XX
 config BLK_DEV_DTC2278
        tristate "DTC-2278 support"
        help
-         This driver is enabled at runtime using the "ide0=dtc2278" kernel
+         This driver is enabled at runtime using the "dtc2278.probe" kernel
          boot parameter. It enables support for the secondary IDE interface
          of the DTC-2278 card, and permits faster I/O speeds to be set as
          well. See the <file:Documentation/ide.txt> and
@@ -1007,7 +1042,7 @@ config BLK_DEV_DTC2278
 config BLK_DEV_HT6560B
        tristate "Holtek HT6560B support"
        help
-         This driver is enabled at runtime using the "ide0=ht6560b" kernel
+         This driver is enabled at runtime using the "ht6560b.probe" kernel
          boot parameter. It enables support for the secondary IDE interface
          of the Holtek card, and permits faster I/O speeds to be set as well.
          See the <file:Documentation/ide.txt> and
@@ -1016,7 +1051,7 @@ config BLK_DEV_HT6560B
 config BLK_DEV_QD65XX
        tristate "QDI QD65xx support"
        help
-         This driver is enabled at runtime using the "ide0=qd65xx" kernel
+         This driver is enabled at runtime using the "qd65xx.probe" kernel
          boot parameter.  It permits faster I/O speeds to be set.  See the
          <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> for
          more info.
@@ -1024,7 +1059,7 @@ config BLK_DEV_QD65XX
 config BLK_DEV_UMC8672
        tristate "UMC-8672 support"
        help
-         This driver is enabled at runtime using the "ide0=umc8672" kernel
+         This driver is enabled at runtime using the "umc8672.probe" kernel
          boot parameter. It enables support for the secondary IDE interface
          of the UMC-8672, and permits faster I/O speeds to be set as well.
          See the files <file:Documentation/ide.txt> and