ide: cable detection fixes (take 2)

[powerpc.git] / drivers / ide / pci / pdc202xx_old.c

diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 207a619..7146fe3 100644 (file)
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -46,7 +46,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#define PDC202_DEBUG_CABLE             0
 #define PDC202XX_DEBUG_DRIVE_INFO      0
 
 static const char *pdc_quirk_drives[] = {
@@ -238,20 +237,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
        u32 drive_conf          = 0;
        u8 drive_pci            = 0x60 + (drive->dn << 2);
        u8 test1 = 0, test2 = 0, speed = -1;
-       u8 AP = 0, cable = 0;
-
-       u8 ultra_66             = ((id->dma_ultra & 0x0010) ||
-                                  (id->dma_ultra & 0x0008)) ? 1 : 0;
-
-       if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
-               cable = pdc202xx_old_cable_detect(hwif);
-       else
-               ultra_66 = 0;
-
-       if (ultra_66 && cable) {
-               printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
-               printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
-       }
+       u8 AP = 0;
 
        if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
                pdc_old_disable_66MHz_clock(drive->hwif);
@@ -477,10 +463,6 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
        if (!noautodma)
                hwif->autodma = 1;
        hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
-#if PDC202_DEBUG_CABLE
-       printk(KERN_DEBUG "%s: %s-pin cable\n",
-               hwif->name, hwif->udma_four ? "80" : "40");
-#endif /* PDC202_DEBUG_CABLE */        
 }
 
 static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)