} pmac_ide_hwif_t;
-static pmac_ide_hwif_t pmac_ide[MAX_HWIFS] __pmacdata;
+static pmac_ide_hwif_t pmac_ide[MAX_HWIFS];
static int pmac_ide_count;
enum {
int cycleTime;
};
-struct mdma_timings_t mdma_timings_33[] __pmacdata =
+struct mdma_timings_t mdma_timings_33[] =
{
{ 240, 240, 480 },
{ 180, 180, 360 },
{ 0, 0, 0 }
};
-struct mdma_timings_t mdma_timings_33k[] __pmacdata =
+struct mdma_timings_t mdma_timings_33k[] =
{
{ 240, 240, 480 },
{ 180, 180, 360 },
{ 0, 0, 0 }
};
-struct mdma_timings_t mdma_timings_66[] __pmacdata =
+struct mdma_timings_t mdma_timings_66[] =
{
{ 240, 240, 480 },
{ 180, 180, 360 },
int addrSetup; /* ??? */
int rdy2pause;
int wrDataSetup;
-} kl66_udma_timings[] __pmacdata =
+} kl66_udma_timings[] =
{
{ 0, 180, 120 }, /* Mode 0 */
{ 0, 150, 90 }, /* 1 */
u32 timing_reg;
};
-static struct kauai_timing kauai_pio_timings[] __pmacdata =
+static struct kauai_timing kauai_pio_timings[] =
{
{ 930 , 0x08000fff },
{ 600 , 0x08000a92 },
{ 120 , 0x04000148 }
};
-static struct kauai_timing kauai_mdma_timings[] __pmacdata =
+static struct kauai_timing kauai_mdma_timings[] =
{
{ 1260 , 0x00fff000 },
{ 480 , 0x00618000 },
{ 0 , 0 },
};
-static struct kauai_timing kauai_udma_timings[] __pmacdata =
+static struct kauai_timing kauai_udma_timings[] =
{
{ 120 , 0x000070c0 },
{ 90 , 0x00005d80 },
{ 0 , 0 },
};
-static struct kauai_timing shasta_pio_timings[] __pmacdata =
+static struct kauai_timing shasta_pio_timings[] =
{
{ 930 , 0x08000fff },
{ 600 , 0x0A000c97 },
{ 120 , 0x0400010a }
};
-static struct kauai_timing shasta_mdma_timings[] __pmacdata =
+static struct kauai_timing shasta_mdma_timings[] =
{
{ 1260 , 0x00fff000 },
{ 480 , 0x00820800 },
{ 0 , 0 },
};
-static struct kauai_timing shasta_udma133_timings[] __pmacdata =
+static struct kauai_timing shasta_udma133_timings[] =
{
{ 120 , 0x00035901, },
{ 90 , 0x000348b1, },
if (pmu_get_model() != PMU_KEYLARGO_BASED)
return 0;
- dt = find_devices("device-tree");
+ dt = of_find_node_by_path("/");
if (dt == NULL)
return 0;
model = (const char *)get_property(dt, "model", NULL);
if (model == NULL)
return 0;
if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
- strncmp(model, "iBook", strlen("iBook")) != 0)
+ strncmp(model, "iBook", strlen("iBook")) != 0) {
+ of_node_put(dt);
return 0;
-
+ }
+ of_node_put(dt);
+
pmu_blink_on.complete = 1;
pmu_blink_off.complete = 1;
spin_lock_init(&pmu_blink_lock);
* N.B. this can't be an initfunc, because the media-bay task can
* call ide_[un]register at any time.
*/
-void __pmac
+void
pmac_ide_init_hwif_ports(hw_regs_t *hw,
unsigned long data_port, unsigned long ctrl_port,
int *irq)
* timing register when selecting that unit. This version is for
* ASICs with a single timing register
*/
-static void __pmac
+static void
pmac_ide_selectproc(ide_drive_t *drive)
{
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
* timing register when selecting that unit. This version is for
* ASICs with a dual timing register (Kauai)
*/
-static void __pmac
+static void
pmac_ide_kauai_selectproc(ide_drive_t *drive)
{
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
/*
* Force an update of controller timing values for a given drive
*/
-static void __pmac
+static void
pmac_ide_do_update_timings(ide_drive_t *drive)
{
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
* to sort that out sooner or later and see if I can finally get the
* common version to work properly in all cases
*/
-static int __pmac
+static int
pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
{
ide_hwif_t *hwif = HWIF(drive);
/*
* Old tuning functions (called on hdparm -p), sets up drive PIO timings
*/
-static void __pmac
+static void
pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
{
ide_pio_data_t d;
/*
* Calculate KeyLargo ATA/66 UDMA timings
*/
-static int __pmac
+static int
set_timings_udma_ata4(u32 *timings, u8 speed)
{
unsigned rdyToPauseTicks, wrDataSetupTicks, addrTicks;
/*
* Calculate Kauai ATA/100 UDMA timings
*/
-static int __pmac
+static int
set_timings_udma_ata6(u32 *pio_timings, u32 *ultra_timings, u8 speed)
{
struct ide_timing *t = ide_timing_find_mode(speed);
/*
* Calculate Shasta ATA/133 UDMA timings
*/
-static int __pmac
+static int
set_timings_udma_shasta(u32 *pio_timings, u32 *ultra_timings, u8 speed)
{
struct ide_timing *t = ide_timing_find_mode(speed);
/*
* Calculate MDMA timings for all cells
*/
-static int __pmac
+static int
set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
u8 speed, int drive_cycle_time)
{
* our dedicated function is more precise as it uses the drive provided
* cycle time value. We should probably fix this one to deal with that too...
*/
-static int __pmac
+static int
pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
{
int unit = (drive->select.b.unit & 0x01);
* Blast some well known "safe" values to the timing registers at init or
* wakeup from sleep time, before we do real calculation
*/
-static void __pmac
+static void
sanitize_timings(pmac_ide_hwif_t *pmif)
{
unsigned int value, value2 = 0;
pmif->timings[2] = pmif->timings[3] = value2;
}
-unsigned long __pmac
+unsigned long
pmac_ide_get_base(int index)
{
return pmac_ide[index].regbase;
}
-int __pmac
+int
pmac_ide_check_base(unsigned long base)
{
int ix;
return -1;
}
-int __pmac
+int
pmac_ide_get_irq(unsigned long base)
{
int ix;
return 0;
}
-static int ide_majors[] __pmacdata = { 3, 22, 33, 34, 56, 57 };
+static int ide_majors[] = { 3, 22, 33, 34, 56, 57 };
dev_t __init
pmac_find_ide_boot(char *bootdevice, int n)
/* We probe the hwif now */
probe_hwif_init(hwif);
- /* The code IDE code will have set hwif->present if we have devices attached,
- * if we don't, the discard the interface except if we are on a media bay slot
- */
- if (!hwif->present && !pmif->mediabay) {
- printk(KERN_INFO "ide%d: Bus empty, interface released.\n",
- hwif->index);
- default_hwif_iops(hwif);
- for (i = IDE_DATA_OFFSET; i <= IDE_CONTROL_OFFSET; ++i)
- hwif->io_ports[i] = 0;
- hwif->chipset = ide_unknown;
- hwif->noprobe = 1;
- return -ENODEV;
- }
-
return 0;
}
};
static struct pci_device_id pmac_ide_pci_match[] = {
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
};
static struct pci_driver pmac_ide_pci_driver = {
* pmac_ide_build_dmatable builds the DBDMA command list
* for a transfer and sets the DBDMA channel to point to it.
*/
-static int __pmac
+static int
pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq)
{
struct dbdma_cmd *table;
}
/* Teardown mappings after DMA has completed. */
-static void __pmac
+static void
pmac_ide_destroy_dmatable (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
/*
* Pick up best MDMA timing for the drive and apply it
*/
-static int __pmac
+static int
pmac_ide_mdma_enable(ide_drive_t *drive, u16 mode)
{
ide_hwif_t *hwif = HWIF(drive);
/*
* Pick up best UDMA timing for the drive and apply it
*/
-static int __pmac
+static int
pmac_ide_udma_enable(ide_drive_t *drive, u16 mode)
{
ide_hwif_t *hwif = HWIF(drive);
* Check what is the best DMA timing setting for the drive and
* call appropriate functions to apply it.
*/
-static int __pmac
+static int
pmac_ide_dma_check(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
* Prepare a DMA transfer. We build the DMA table, adjust the timings for
* a read on KeyLargo ATA/66 and mark us as waiting for DMA completion
*/
-static int __pmac
+static int
pmac_ide_dma_setup(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
return 0;
}
-static void __pmac
+static void
pmac_ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
/* issue cmd to drive */
* Kick the DMA controller into life after the DMA command has been issued
* to the drive.
*/
-static void __pmac
+static void
pmac_ide_dma_start(ide_drive_t *drive)
{
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
/*
* After a DMA transfer, make sure the controller is stopped
*/
-static int __pmac
+static int
pmac_ide_dma_end (ide_drive_t *drive)
{
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
* that's not implemented yet), on the other hand, we don't have shared interrupts
* so it's not really a problem
*/
-static int __pmac
+static int
pmac_ide_dma_test_irq (ide_drive_t *drive)
{
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
return 1;
}
-static int __pmac
+static int
pmac_ide_dma_host_off (ide_drive_t *drive)
{
return 0;
}
-static int __pmac
+static int
pmac_ide_dma_host_on (ide_drive_t *drive)
{
return 0;
}
-static int __pmac
+static int
pmac_ide_dma_lostirq (ide_drive_t *drive)
{
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
projects / powerpc.git / blobdiff