#include <asm/sections.h>
#include <asm/irq.h>
#include <asm/pmac_feature.h>
+#include <asm/pmac_pfunc.h>
+#include <asm/pmac_low_i2c.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <asm/cputable.h>
static int pmu_kind = PMU_UNKNOWN;
static int pmu_fully_inited = 0;
static int pmu_has_adb;
+static struct device_node *gpio_node;
static unsigned char __iomem *gpio_reg = NULL;
static int gpio_irq = -1;
static int gpio_irq_enabled = -1;
static int drop_interrupts;
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
static int option_lid_wakeup = 1;
-static int sleep_in_progress;
#endif /* CONFIG_PM && CONFIG_PPC32 */
+static int sleep_in_progress;
static unsigned long async_req_locks;
static unsigned int pmu_irq_stats[11];
#endif /* CONFIG_ADB */
static int init_pmu(void);
-static int pmu_queue_request(struct adb_request *req);
static void pmu_start(void);
static irqreturn_t via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs);
static irqreturn_t gpio1_interrupt(int irq, void *arg, struct pt_regs *regs);
};
#endif /* CONFIG_PMAC_BACKLIGHT */
-int
-find_via_pmu(void)
+int __init find_via_pmu(void)
{
+ u64 taddr;
+ u32 *reg;
+
if (via != 0)
return 1;
- vias = find_devices("via-pmu");
- if (vias == 0)
+ vias = of_find_node_by_name(NULL, "via-pmu");
+ if (vias == NULL)
return 0;
- if (vias->next != 0)
- printk(KERN_WARNING "Warning: only using 1st via-pmu\n");
- if (vias->n_addrs < 1 || vias->n_intrs < 1) {
- printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n",
- vias->n_addrs, vias->n_intrs);
- if (vias->n_addrs < 1 || vias->n_intrs < 1)
- return 0;
+ reg = (u32 *)get_property(vias, "reg", NULL);
+ if (reg == NULL) {
+ printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
+ goto fail;
+ }
+ taddr = of_translate_address(vias, reg);
+ if (taddr == OF_BAD_ADDR) {
+ printk(KERN_ERR "via-pmu: Can't translate address !\n");
+ goto fail;
}
spin_lock_init(&pmu_lock);
pmu_kind = PMU_HEATHROW_BASED;
else if (device_is_compatible(vias->parent, "Keylargo")
|| device_is_compatible(vias->parent, "K2-Keylargo")) {
- struct device_node *gpio, *gpiop;
+ struct device_node *gpiop;
+ u64 gaddr = OF_BAD_ADDR;
pmu_kind = PMU_KEYLARGO_BASED;
pmu_has_adb = (find_type_devices("adb") != NULL);
PMU_INT_TICK |
PMU_INT_ENVIRONMENT;
- gpiop = find_devices("gpio");
- if (gpiop && gpiop->n_addrs) {
- gpio_reg = ioremap(gpiop->addrs->address, 0x10);
- gpio = find_devices("extint-gpio1");
- if (gpio == NULL)
- gpio = find_devices("pmu-interrupt");
- if (gpio && gpio->parent == gpiop && gpio->n_intrs)
- gpio_irq = gpio->intrs[0].line;
+ gpiop = of_find_node_by_name(NULL, "gpio");
+ if (gpiop) {
+ reg = (u32 *)get_property(gpiop, "reg", NULL);
+ if (reg)
+ gaddr = of_translate_address(gpiop, reg);
+ if (gaddr != OF_BAD_ADDR)
+ gpio_reg = ioremap(gaddr, 0x10);
}
+ if (gpio_reg == NULL)
+ printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
} else
pmu_kind = PMU_UNKNOWN;
- via = ioremap(vias->addrs->address, 0x2000);
+ via = ioremap(taddr, 0x2000);
+ if (via == NULL) {
+ printk(KERN_ERR "via-pmu: Can't map address !\n");
+ goto fail;
+ }
out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
out_8(&via[IFR], 0x7f); /* clear IFR */
return 0;
}
- printk(KERN_INFO "PMU driver %d initialized for %s, firmware: %02x\n",
+ printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
sys_ctrler = SYS_CTRLER_PMU;
return 1;
+ fail:
+ of_node_put(vias);
+ vias = NULL;
+ return 0;
}
#ifdef CONFIG_ADB
-static int
-pmu_probe(void)
+static int pmu_probe(void)
{
return vias == NULL? -ENODEV: 0;
}
-static int __init
-pmu_init(void)
+static int __init pmu_init(void)
{
if (vias == NULL)
return -ENODEV;
bright_req_2.complete = 1;
batt_req.complete = 1;
-#if defined(CONFIG_PPC32) && !defined(CONFIG_PPC_MERGE)
+#ifndef CONFIG_PPC_MERGE
if (pmu_kind == PMU_KEYLARGO_BASED)
openpic_set_irq_priority(vias->intrs[0].line,
OPENPIC_PRIORITY_DEFAULT + 1);
return -EAGAIN;
}
- if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) {
- if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0))
- printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq);
- gpio_irq_enabled = 1;
+ if (pmu_kind == PMU_KEYLARGO_BASED) {
+ gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
+ if (gpio_node == NULL)
+ gpio_node = of_find_node_by_name(NULL,
+ "pmu-interrupt");
+ if (gpio_node && gpio_node->n_intrs > 0)
+ gpio_irq = gpio_node->intrs[0].line;
+
+ if (gpio_irq != -1) {
+ if (request_irq(gpio_irq, gpio1_interrupt, 0,
+ "GPIO1 ADB", (void *)0))
+ printk(KERN_ERR "pmu: can't get irq %d"
+ " (GPIO1)\n", gpio_irq);
+ else
+ gpio_irq_enabled = 1;
+ }
}
/* Enable interrupts */
if (vias == NULL)
return -ENODEV;
-#ifndef CONFIG_PPC64
- request_OF_resource(vias, 0, NULL);
-#endif
#ifdef CONFIG_PMAC_BACKLIGHT
/* Enable backlight */
register_backlight_controller(&pmu_backlight_controller, NULL, "pmu");
}
pmu_done(req);
} else {
-#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64)
if (len == 4 && data[1] == 0x2c) {
extern int xmon_wants_key, xmon_adb_keycode;
if (xmon_wants_key) {
return;
}
}
-#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */
#ifdef CONFIG_ADB
/*
* XXX On the [23]400 the PMU gives us an up
return via != 0;
}
-struct pmu_i2c_hdr {
- u8 bus;
- u8 mode;
- u8 bus2;
- u8 address;
- u8 sub_addr;
- u8 comb_addr;
- u8 count;
-};
-
-int
-pmu_i2c_combined_read(int bus, int addr, int subaddr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_COMBINED;
- hdr->bus2 = 0;
- hdr->sub_addr = subaddr;
- hdr->comb_addr = addr | 1;
- hdr->count = len;
-
- req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
- memcpy(data, &req.reply[1], req.reply_len - 1);
- return req.reply_len - 1;
- }
- }
- return -1;
-}
-
-int
-pmu_i2c_stdsub_write(int bus, int addr, int subaddr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_STDSUB;
- hdr->bus2 = 0;
- hdr->sub_addr = subaddr;
- hdr->comb_addr = addr & 0xfe;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
- req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- return len;
- }
- return -1;
-}
-
-int
-pmu_i2c_simple_read(int bus, int addr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr | 1;
- hdr->mode = PMU_I2C_MODE_SIMPLE;
- hdr->bus2 = 0;
- hdr->sub_addr = 0;
- hdr->comb_addr = 0;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
- memcpy(data, &req.reply[1], req.reply_len - 1);
- return req.reply_len - 1;
- }
- }
- return -1;
-}
-
-int
-pmu_i2c_simple_write(int bus, int addr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_SIMPLE;
- hdr->bus2 = 0;
- hdr->sub_addr = 0;
- hdr->comb_addr = 0;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
- req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- return len;
- }
- return -1;
-}
-
#ifdef CONFIG_PM
static LIST_HEAD(sleep_notifiers);
__list_add(&n->list, list->prev, list);
return 0;
}
+EXPORT_SYMBOL(pmu_register_sleep_notifier);
int
pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* n)
n->list.next = NULL;
return 0;
}
+EXPORT_SYMBOL(pmu_unregister_sleep_notifier);
#endif /* CONFIG_PM */
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
return -EBUSY;
}
- /* Disable clock spreading on some machines */
- pmac_tweak_clock_spreading(0);
+ /* Call platform functions marked "on sleep" */
+ pmac_pfunc_i2c_suspend();
+ pmac_pfunc_base_suspend();
/* Stop preemption */
preempt_disable();
mdelay(10);
preempt_enable();
- /* Re-enable clock spreading on some machines */
- pmac_tweak_clock_spreading(1);
+ /* Call platform functions marked "on wake" */
+ pmac_pfunc_base_resume();
+ pmac_pfunc_i2c_resume();
/* Resume devices */
device_resume();
asleep = 1;
/* Put the CPU into sleep mode */
- asm volatile("mfspr %0,1008" : "=r" (hid0) :);
+ hid0 = mfspr(SPRN_HID0);
hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
- asm volatile("mtspr 1008,%0" : : "r" (hid0));
- _nmask_and_or_msr(0, MSR_POW | MSR_EE);
+ mtspr(SPRN_HID0, hid0);
+ mtmsr(mfmsr() | MSR_POW | MSR_EE);
udelay(10);
/* OK, we're awake again, start restoring things */
subsys_initcall(init_pmu_sysfs);
EXPORT_SYMBOL(pmu_request);
+EXPORT_SYMBOL(pmu_queue_request);
EXPORT_SYMBOL(pmu_poll);
EXPORT_SYMBOL(pmu_poll_adb);
EXPORT_SYMBOL(pmu_wait_complete);
EXPORT_SYMBOL(pmu_suspend);
EXPORT_SYMBOL(pmu_resume);
EXPORT_SYMBOL(pmu_unlock);
-EXPORT_SYMBOL(pmu_i2c_combined_read);
-EXPORT_SYMBOL(pmu_i2c_stdsub_write);
-EXPORT_SYMBOL(pmu_i2c_simple_read);
-EXPORT_SYMBOL(pmu_i2c_simple_write);
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
-EXPORT_SYMBOL(pmu_register_sleep_notifier);
-EXPORT_SYMBOL(pmu_unregister_sleep_notifier);
EXPORT_SYMBOL(pmu_enable_irled);
EXPORT_SYMBOL(pmu_battery_count);
EXPORT_SYMBOL(pmu_batteries);
projects / powerpc.git / blobdiff