.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .gpiomask = 0x00200000,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
+ .gpio = 0x200000, /* GPIO21=High for TV input */
.tv = 1,
},{
.name = name_comp1, /* Composite signal on S-Video input */
.vmux = 8,
.amux = LINE2,
}},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x000000, /* GPIO21=Low for FM radio antenna */
+ },
},
[SAA7134_BOARD_PHILIPS_TOUGH] = {
.name = "Philips TOUGH DVB-T reference design",
.vmux = 1,
.amux = TV,
.tv = 1,
+ .gpio = 0x0000000,
},{
.name = name_comp1,
.vmux = 3,
.amux = LINE2,
+ .gpio = 0x0200000,
+ },{
+ .name = name_comp2,
+ .vmux = 0,
+ .amux = LINE2,
+ .gpio = 0x0200000,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
+ .gpio = 0x0200000,
}},
.radio = {
.name = name_radio,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .tuner_config = 0,
.mpeg = SAA7134_MPEG_DVB,
- .gpiomask = 1 << 21,
+ .gpiomask = 0x0200000,
.inputs = {{
.name = name_tv,
.vmux = 1,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .gpiomask = 1 << 21,
.inputs = {{
.name = name_tv,
.vmux = 1,
},{
.name = name_comp1,
.vmux = 3,
- .amux = LINE1,
+ .amux = LINE2, /* unconfirmed, taken from Philips driver */
+ },{
+ .name = name_comp2,
+ .vmux = 0, /* untested, Composite over S-Video */
+ .amux = LINE2,
},{
.name = name_svideo,
- .vmux = 0,
- .amux = LINE1,
+ .vmux = 8,
+ .amux = LINE2,
}},
.radio = {
.name = name_radio,
- .amux = LINE1,
+ .amux = TV,
+ .gpio = 0x0200000,
},
},
[SAA7134_BOARD_CINERGY250PCI] = {
}},
.radio = {
.name = name_radio,
- .amux = LINE1,
+ .amux = TV,
.gpio = 0x0200000,
},
},
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .tuner_config = 1,
.mpeg = SAA7134_MPEG_DVB,
.gpiomask = 0x000200000,
.inputs = {{
.gpio = 0x00,
},
},
+ [SAA7134_BOARD_VIDEOMATE_DVBT_200A] = {
+ /* Francis Barber <fedora@barber-family.id.au> */
+ .name = "Compro Videomate DVB-T200A",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 3,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 1,
+ .amux = LINE2,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ }},
+ },
+ [SAA7134_BOARD_HAUPPAUGE_HVR1110] = {
+ /* Thomas Genty <tomlohave@gmail.com> */
+ .name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ },
+ },
+ [SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
+ .name = "Terratec Cinergy HT PCMCIA",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 6,
+ .amux = LINE1,
+ }},
+ },
+ [SAA7134_BOARD_ENCORE_ENLTV] = {
+ /* Steven Walter <stevenrwalter@gmail.com>
+ Juan Pablo Sormani <sorman@gmail.com> */
+ .name = "Encore ENLTV",
+ .audio_clock = 0x00200000,
+ .tuner_type = TUNER_TNF_5335MF,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = 3,
+ .tv = 1,
+ },{
+ .name = name_tv_mono,
+ .vmux = 7,
+ .amux = 4,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = 2,
+ },{
+ .name = name_svideo,
+ .vmux = 0,
+ .amux = 2,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = LINE2,
+/* .gpio = 0x00300001,*/
+ .gpio = 0x20000,
+
+ },
+ .mute = {
+ .name = name_mute,
+ .amux = 0,
+ },
+ },
+ [SAA7134_BOARD_ENCORE_ENLTV_FM] = {
+ /* Juan Pablo Sormani <sorman@gmail.com> */
+ .name = "Encore ENLTV-FM",
+ .audio_clock = 0x00200000,
+ .tuner_type = TUNER_PHILIPS_ATSC,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = 3,
+ .tv = 1,
+ },{
+ .name = name_tv_mono,
+ .vmux = 7,
+ .amux = 4,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = 2,
+ },{
+ .name = name_svideo,
+ .vmux = 0,
+ .amux = 2,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = LINE2,
+ .gpio = 0x20000,
+
+ },
+ .mute = {
+ .name = name_mute,
+ .amux = 0,
+ },
+ },
+ [SAA7134_BOARD_CINERGY_HT_PCI] = {
+ .name = "Terratec Cinergy HT PCI",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 6,
+ .amux = LINE1,
+ }},
+ },
+ [SAA7134_BOARD_PHILIPS_TIGER_S] = {
+ .name = "Philips Tiger - S Reference design",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tuner_config = 2,
+ .mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 0x0200000,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200000,
+ },
+ },
+ [SAA7134_BOARD_AVERMEDIA_M102] = {
+ .name = "Avermedia M102",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .gpiomask = 1<<21,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE2,
+ },{
+ .name = name_svideo,
+ .vmux = 6,
+ .amux = LINE2,
+ }},
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
.subvendor = 0x1461, /* Avermedia Technologies Inc */
.subdevice = 0x9715,
.driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_507,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1043,
+ .subdevice = 0x4876,
+ .driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x0070,
+ .subdevice = 0x6701,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x153b,
+ .subdevice = 0x1172,
+ .driver_data = SAA7134_BOARD_CINERGY_HT_PCMCIA,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7130,
+ .subvendor = PCI_VENDOR_ID_PHILIPS,
+ .subdevice = 0x2342,
+ .driver_data = SAA7134_BOARD_ENCORE_ENLTV,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7130,
+ .subvendor = 0x1131,
+ .subdevice = 0x2341,
+ .driver_data = SAA7134_BOARD_ENCORE_ENLTV,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7130,
+ .subvendor = 0x3016,
+ .subdevice = 0x2344,
+ .driver_data = SAA7134_BOARD_ENCORE_ENLTV,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7130,
+ .subvendor = 0x1131,
+ .subdevice = 0x230f,
+ .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x153b,
+ .subdevice = 0x1175,
+ .driver_data = SAA7134_BOARD_CINERGY_HT_PCI,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xf31e,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_M102,
},{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.subdevice = 0,
.driver_data = SAA7134_BOARD_NOAUTO,
},{
-
/* --- default catch --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII:
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
+ case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
case SAA7134_BOARD_MANLI_MTV001:
case SAA7134_BOARD_MANLI_MTV002:
case SAA7134_BOARD_BEHOLD_409FM:
case SAA7134_BOARD_KWORLD_TERMINATOR:
case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS:
case SAA7134_BOARD_FLYDVBT_LR301:
+ case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_FLYDVBTDUO:
case SAA7134_BOARD_PROTEUS_2309:
case SAA7134_BOARD_AVERMEDIA_A16AR:
+ case SAA7134_BOARD_ENCORE_ENLTV:
+ case SAA7134_BOARD_ENCORE_ENLTV_FM:
dev->has_remote = SAA7134_REMOTE_GPIO;
break;
case SAA7134_BOARD_FLYDVBS_LR300:
break;
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
- saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
- saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00);
+ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x08000000, 0x08000000);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000);
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
/* power-up tuner chip */
case SAA7134_BOARD_PINNACLE_PCTV_110i:
case SAA7134_BOARD_PINNACLE_PCTV_310i:
case SAA7134_BOARD_UPMOST_PURPLE_TV:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
dev->has_remote = SAA7134_REMOTE_I2C;
break;
case SAA7134_BOARD_AVERMEDIA_A169_B:
"%s: Dual decoder functionality is disabled for now, use the other chip.\n",
dev->name,card(dev).name,dev->name,dev->name);
break;
+ case SAA7134_BOARD_AVERMEDIA_M102:
+ /* enable tuner */
+ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x8c040007, 0x8c040007);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0c0007cd, 0x0c0007cd);
+ break;
}
return 0;
}
{
unsigned char buf;
int board;
+ struct tuner_setup tun_setup;
+ tun_setup.config = 0;
+ tun_setup.tuner_callback = saa7134_tuner_callback;
switch (dev->board) {
case SAA7134_BOARD_BMK_MPEX_NOTUNER:
dev->tuner_type = saa7134_boards[dev->board].tuner_type;
if (TUNER_ABSENT != dev->tuner_type) {
- struct tuner_setup tun_setup;
-
tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
tun_setup.type = dev->tuner_type;
tun_setup.addr = ADDR_UNSET;
break;
case SAA7134_BOARD_MD7134:
{
- struct tuner_setup tun_setup;
u8 subaddr;
u8 data[3];
int ret, tuner_t;
* the channel decoder. We have to make it transparent to find it
*/
{
- struct tuner_setup tun_setup;
u8 data[] = { 0x07, 0x02};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
case SAA7134_BOARD_PHILIPS_TIGER:
+ case SAA7134_BOARD_PHILIPS_TIGER_S:
+ {
+ u8 data[] = { 0x3c, 0x33, 0x60};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+ if(dev->autodetected && (dev->eedata[0x49] == 0x50)) {
+ dev->board = SAA7134_BOARD_PHILIPS_TIGER_S;
+ printk(KERN_INFO "%s: Reconfigured board as %s\n",
+ dev->name, saa7134_boards[dev->board].name);
+ }
+ if(dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) {
+ tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
+ tun_setup.type = TUNER_PHILIPS_TDA8290;
+ tun_setup.addr = 0x4b;
+ tun_setup.config = 2;
+
+ saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
+ data[2] = 0x68;
+ }
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ }
+ break;
case SAA7134_BOARD_PINNACLE_PCTV_310i:
case SAA7134_BOARD_TEVION_DVBT_220RF:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
{
- u8 data[] = { 0x3c, 0x33, 0x68};
+ u8 data[] = { 0x3c, 0x33, 0x60};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
- /* make the tda10046 find its eeprom */
+ /* initialize analog mode */
{
- u8 data[] = { 0x3c, 0x33, 0x62};
+ u8 data[] = { 0x3c, 0x33, 0x6a};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ }
+ break;
+ case SAA7134_BOARD_CINERGY_HT_PCMCIA:
+ case SAA7134_BOARD_CINERGY_HT_PCI:
+ /* initialize analog mode */
+ {
+ u8 data[] = { 0x3c, 0x33, 0x68};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
dev->name, i);
}
break;
+ case SAA7134_BOARD_VIDEOMATE_DVBT_200:
+ case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
+ /* The T200 and the T200A share the same pci id. Consequently,
+ * we are going to query eeprom to try to find out which one we
+ * are actually looking at. */
+
+ /* Don't do this if the board was specifically selected with an
+ * insmod option or if we have the default configuration T200*/
+ if(!dev->autodetected || (dev->eedata[0x41] == 0xd0))
+ break;
+ if(dev->eedata[0x41] == 0x02) {
+ /* Reconfigure board as T200A */
+ dev->board = SAA7134_BOARD_VIDEOMATE_DVBT_200A;
+ dev->tuner_type = saa7134_boards[dev->board].tuner_type;
+ dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
+ printk(KERN_INFO "%s: Reconfigured board as %s\n",
+ dev->name, saa7134_boards[dev->board].name);
+ } else {
+ printk(KERN_WARNING "%s: Unexpected tuner type info: %x in eeprom\n",
+ dev->name, dev->eedata[0x41]);
+ break;
+ }
+ break;
}
return 0;
}
projects / powerpc.git / blobdiff