{
struct mmc_ios *ios = &host->ios;
- pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
+ pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
+ "width %u timing %u\n",
mmc_hostname(host), ios->clock, ios->bus_mode,
ios->power_mode, ios->chip_select, ios->vdd,
- ios->bus_width);
+ ios->bus_width, ios->timing);
host->ops->set_ios(host, ios);
}
host->ios.chip_select = MMC_CS_DONTCARE;
host->ios.power_mode = MMC_POWER_UP;
host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
mmc_delay(1);
host->ios.chip_select = MMC_CS_DONTCARE;
host->ios.power_mode = MMC_POWER_OFF;
host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
}
mmc_wait_for_req(host, &mrq);
if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
+ printk("%s: unable to read EXT_CSD, performance "
+ "might suffer.\n", mmc_hostname(card->host));
continue;
}
printk("%s: card is mmc v4 but doesn't support "
"any high-speed modes.\n",
mmc_hostname(card->host));
- mmc_card_set_bad(card);
continue;
}
- /* Activate highspeed support. */
- cmd.opcode = MMC_SWITCH;
- cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_HS_TIMING << 16) |
- (1 << 8) |
- EXT_CSD_CMD_SET_NORMAL;
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ if (host->caps & MMC_CAP_MMC_HIGHSPEED) {
+ /* Activate highspeed support. */
+ cmd.opcode = MMC_SWITCH;
+ cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_HS_TIMING << 16) |
+ (1 << 8) |
+ EXT_CSD_CMD_SET_NORMAL;
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
- if (err != MMC_ERR_NONE) {
- printk("%s: failed to switch card to mmc v4 "
- "high-speed mode.\n",
- mmc_hostname(card->host));
- continue;
- }
+ err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ if (err != MMC_ERR_NONE) {
+ printk("%s: failed to switch card to mmc v4 "
+ "high-speed mode.\n",
+ mmc_hostname(card->host));
+ continue;
+ }
- mmc_card_set_highspeed(card);
+ mmc_card_set_highspeed(card);
- /* Check for host support for wide-bus modes. */
- if (!(host->caps & MMC_CAP_4_BIT_DATA)) {
- continue;
+ host->ios.timing = MMC_TIMING_SD_HS;
+ mmc_set_ios(host);
}
- /* Activate 4-bit support. */
- cmd.opcode = MMC_SWITCH;
- cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_BUS_WIDTH << 16) |
- (EXT_CSD_BUS_WIDTH_4 << 8) |
- EXT_CSD_CMD_SET_NORMAL;
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ /* Check for host support for wide-bus modes. */
+ if (host->caps & MMC_CAP_4_BIT_DATA) {
+ /* Activate 4-bit support. */
+ cmd.opcode = MMC_SWITCH;
+ cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_BUS_WIDTH << 16) |
+ (EXT_CSD_BUS_WIDTH_4 << 8) |
+ EXT_CSD_CMD_SET_NORMAL;
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
- err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
- if (err != MMC_ERR_NONE) {
- printk("%s: failed to switch card to "
- "mmc v4 4-bit bus mode.\n",
- mmc_hostname(card->host));
- continue;
- }
+ err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
+ if (err != MMC_ERR_NONE) {
+ printk("%s: failed to switch card to "
+ "mmc v4 4-bit bus mode.\n",
+ mmc_hostname(card->host));
+ continue;
+ }
- host->ios.bus_width = MMC_BUS_WIDTH_4;
+ host->ios.bus_width = MMC_BUS_WIDTH_4;
+ mmc_set_ios(host);
+ }
}
kfree(ext_csd);
unsigned char *status;
struct scatterlist sg;
+ if (!(host->caps & MMC_CAP_SD_HIGHSPEED))
+ return;
+
status = kmalloc(64, GFP_KERNEL);
if (!status) {
printk(KERN_WARNING "%s: Unable to allocate buffer for "
mmc_wait_for_req(host, &mrq);
if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
+ printk("%s: unable to read switch capabilities, "
+ "performance might suffer.\n",
+ mmc_hostname(card->host));
continue;
}
mmc_wait_for_req(host, &mrq);
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
- continue;
- }
-
- if ((status[16] & 0xF) != 1) {
+ if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE ||
+ (status[16] & 0xF) != 1) {
printk(KERN_WARNING "%s: Problem switching card "
"into high-speed mode!\n",
mmc_hostname(host));
}
mmc_card_set_highspeed(card);
+
+ host->ios.timing = MMC_TIMING_SD_HS;
+ mmc_set_ios(host);
}
kfree(status);