Merge git://git.infradead.org/mtd-2.6
[powerpc.git] / drivers / mtd / nand / ts7250.c
index 622db31..f400810 100644 (file)
@@ -83,31 +83,29 @@ static struct mtd_partition partition_info128[] = {
 
 /*
  *     hardware specific access to control-lines
+ *
+ *     ctrl:
+ *     NAND_NCE: bit 0 -> bit 2
+ *     NAND_CLE: bit 1 -> bit 1
+ *     NAND_ALE: bit 2 -> bit 0
  */
-static void ts7250_hwcontrol(struct mtd_info *mtd, int cmd)
+static void ts7250_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-       unsigned long ctrl = TS72XX_NAND_CONTROL_VIRT_BASE;
-
-       switch (cmd) {
-       case NAND_CTL_SETCLE:
-               __raw_writeb(__raw_readb(ctrl) | 0x2, ctrl);
-               break;
-       case NAND_CTL_CLRCLE:
-               __raw_writeb(__raw_readb(ctrl) & ~0x2, ctrl);
-               break;
-       case NAND_CTL_SETALE:
-               __raw_writeb(__raw_readb(ctrl) | 0x1, ctrl);
-               break;
-       case NAND_CTL_CLRALE:
-               __raw_writeb(__raw_readb(ctrl) & ~0x1, ctrl);
-               break;
-       case NAND_CTL_SETNCE:
-               __raw_writeb(__raw_readb(ctrl) | 0x4, ctrl);
-               break;
-       case NAND_CTL_CLRNCE:
-               __raw_writeb(__raw_readb(ctrl) & ~0x4, ctrl);
-               break;
+       struct nand_chip *chip = mtd->priv;
+
+       if (ctrl & NAND_CTRL_CHANGE) {
+               unsigned long addr = TS72XX_NAND_CONTROL_VIRT_BASE;
+               unsigned char bits;
+
+               bits = (ctrl & NAND_NCE) << 2;
+               bits |= ctrl & NAND_CLE;
+               bits |= (ctrl & NAND_ALE) >> 2;
+
+               __raw_writeb((__raw_readb(addr) & ~0x7) | bits, addr);
        }
+
+       if (cmd != NAND_CMD_NONE)
+               writeb(cmd, chip->IO_ADDR_W);
 }
 
 /*
@@ -152,10 +150,10 @@ static int __init ts7250_init(void)
        /* insert callbacks */
        this->IO_ADDR_R = (void *)TS72XX_NAND_DATA_VIRT_BASE;
        this->IO_ADDR_W = (void *)TS72XX_NAND_DATA_VIRT_BASE;
-       this->hwcontrol = ts7250_hwcontrol;
+       this->cmd_ctrl = ts7250_hwcontrol;
        this->dev_ready = ts7250_device_ready;
        this->chip_delay = 15;
-       this->eccmode = NAND_ECC_SOFT;
+       this->ecc.mode = NAND_ECC_SOFT;
 
        printk("Searching for NAND flash...\n");
        /* Scan to find existence of the device */