[SCSI] scsi_debug: support REPORT TARGET PORT GROUPS
[powerpc.git] / drivers / net / e100.c
index ce850f1..27d5d2f 100644 (file)
@@ -1,27 +1,27 @@
 /*******************************************************************************
 
-
-  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+  Intel PRO/100 Linux driver
+  Copyright(c) 1999 - 2006 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
-  under the terms of the GNU General Public License as published by the Free
-  Software Foundation; either version 2 of the License, or (at your option)
-  any later version.
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
 
-  This program is distributed in the hope that it will be useful, but WITHOUT
+  This program is distributed in the hope it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc., 59
-  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 
-  The full GNU General Public License is included in this distribution in the
-  file called LICENSE.
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
 
   Contact Information:
   Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
 *******************************************************************************/
 
 
 #define DRV_NAME               "e100"
-#define DRV_EXT                "-NAPI"
-#define DRV_VERSION            "3.5.10-k2"DRV_EXT
+#define DRV_EXT                        "-NAPI"
+#define DRV_VERSION            "3.5.17-k2"DRV_EXT
 #define DRV_DESCRIPTION                "Intel(R) PRO/100 Network Driver"
-#define DRV_COPYRIGHT          "Copyright(c) 1999-2005 Intel Corporation"
+#define DRV_COPYRIGHT          "Copyright(c) 1999-2006 Intel Corporation"
 #define PFX                    DRV_NAME ": "
 
 #define E100_WATCHDOG_PERIOD   (2 * HZ)
@@ -1395,15 +1395,11 @@ static int e100_phy_init(struct nic *nic)
        }
 
        if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
-          (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000))) {
-               /* enable/disable MDI/MDI-X auto-switching.
-                  MDI/MDI-X auto-switching is disabled for 82551ER/QM chips */
-               if((nic->mac == mac_82551_E) || (nic->mac == mac_82551_F) ||
-                  (nic->mac == mac_82551_10) || (nic->mii.force_media) ||
-                  !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))
-                       mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, 0);
-               else
-                       mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, NCONFIG_AUTO_SWITCH);
+          (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
+               !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+               /* enable/disable MDI/MDI-X auto-switching. */
+               mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
+                               nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
        }
 
        return 0;
@@ -1661,13 +1657,14 @@ static int e100_tx_clean(struct nic *nic)
 
        spin_lock(&nic->cb_lock);
 
-       DPRINTK(TX_DONE, DEBUG, "cb->status = 0x%04X\n",
-               nic->cb_to_clean->status);
-
        /* Clean CBs marked complete */
        for(cb = nic->cb_to_clean;
            cb->status & cpu_to_le16(cb_complete);
            cb = nic->cb_to_clean = cb->next) {
+               DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n",
+                       (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
+                       cb->status);
+
                if(likely(cb->skb != NULL)) {
                        nic->net_stats.tx_packets++;
                        nic->net_stats.tx_bytes += cb->skb->len;
@@ -1767,11 +1764,10 @@ static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
 #define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
 static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
 {
-       if(!(rx->skb = dev_alloc_skb(RFD_BUF_LEN + NET_IP_ALIGN)))
+       if(!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN)))
                return -ENOMEM;
 
        /* Align, init, and map the RFD. */
-       rx->skb->dev = nic->netdev;
        skb_reserve(rx->skb, NET_IP_ALIGN);
        memcpy(rx->skb->data, &nic->blank_rfd, sizeof(struct rfd));
        rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
@@ -1953,7 +1949,7 @@ static int e100_rx_alloc_list(struct nic *nic)
        return 0;
 }
 
-static irqreturn_t e100_intr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t e100_intr(int irq, void *dev_id)
 {
        struct net_device *netdev = dev_id;
        struct nic *nic = netdev_priv(netdev);
@@ -2009,7 +2005,7 @@ static void e100_netpoll(struct net_device *netdev)
        struct nic *nic = netdev_priv(netdev);
 
        e100_disable_irq(nic);
-       e100_intr(nic->pdev->irq, netdev, NULL);
+       e100_intr(nic->pdev->irq, netdev);
        e100_tx_clean(nic);
        e100_enable_irq(nic);
 }
@@ -2147,7 +2143,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
 
        e100_start_receiver(nic, NULL);
 
-       if(!(skb = dev_alloc_skb(ETH_DATA_LEN))) {
+       if(!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
                err = -ENOMEM;
                goto err_loopback_none;
        }
@@ -2482,7 +2478,7 @@ static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
        }
 }
 
-static struct ethtool_ops e100_ethtool_ops = {
+static const struct ethtool_ops e100_ethtool_ops = {
        .get_settings           = e100_get_settings,
        .set_settings           = e100_set_settings,
        .get_drvinfo            = e100_get_drvinfo,
@@ -2577,7 +2573,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 #ifdef CONFIG_NET_POLL_CONTROLLER
        netdev->poll_controller = e100_netpoll;
 #endif
-       strcpy(netdev->name, pci_name(pdev));
+       strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
 
        nic = netdev_priv(netdev);
        nic->netdev = netdev;
@@ -2719,68 +2715,56 @@ static void __devexit e100_remove(struct pci_dev *pdev)
        }
 }
 
-#ifdef CONFIG_PM
 static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
 {
        struct net_device *netdev = pci_get_drvdata(pdev);
        struct nic *nic = netdev_priv(netdev);
-       int retval;
 
-       if(netif_running(netdev))
+       if (netif_running(netdev))
                e100_down(nic);
        e100_hw_reset(nic);
        netif_device_detach(netdev);
 
+#ifdef CONFIG_PM
        pci_save_state(pdev);
-       retval = pci_enable_wake(pdev, pci_choose_state(pdev, state),
-                                nic->flags & (wol_magic | e100_asf(nic)));
-       if (retval)
-               DPRINTK(PROBE,ERR, "Error enabling wake\n");
+       if (nic->flags & (wol_magic | e100_asf(nic)))
+#else
+       if (nic->flags & (wol_magic))
+#endif
+               pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+       else
+               /* disable PME */
+               pci_enable_wake(pdev, 0, 0);
+
        pci_disable_device(pdev);
-       retval = pci_set_power_state(pdev, pci_choose_state(pdev, state));
-       if (retval)
-               DPRINTK(PROBE,ERR, "Error %d setting power state\n", retval);
+       pci_set_power_state(pdev, pci_choose_state(pdev, state));
 
        return 0;
 }
 
+#ifdef CONFIG_PM
 static int e100_resume(struct pci_dev *pdev)
 {
        struct net_device *netdev = pci_get_drvdata(pdev);
        struct nic *nic = netdev_priv(netdev);
-       int retval;
 
-       retval = pci_set_power_state(pdev, PCI_D0);
-       if (retval)
-               DPRINTK(PROBE,ERR, "Error waking adapter\n");
+       pci_set_power_state(pdev, PCI_D0);
        pci_restore_state(pdev);
        /* ack any pending wake events, disable PME */
-       retval = pci_enable_wake(pdev, 0, 0);
-       if (retval)
-               DPRINTK(PROBE,ERR, "Error clearing wake events\n");
+       pci_enable_wake(pdev, 0, 0);
 
        netif_device_attach(netdev);
-       if(netif_running(netdev))
+       if (netif_running(netdev))
                e100_up(nic);
 
        return 0;
 }
-#endif
+#endif /* CONFIG_PM */
 
 
 static void e100_shutdown(struct pci_dev *pdev)
 {
-       struct net_device *netdev = pci_get_drvdata(pdev);
-       struct nic *nic = netdev_priv(netdev);
-       int retval;
-
-#ifdef CONFIG_PM
-       retval = pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic)));
-#else
-       retval = pci_enable_wake(pdev, 0, nic->flags & (wol_magic));
-#endif
-       if (retval)
-               DPRINTK(PROBE,ERR, "Error enabling wake\n");
+       e100_suspend(pdev, PMSG_SUSPEND);
 }
 
 /* ------------------ PCI Error Recovery infrastructure  -------------- */
@@ -2799,6 +2783,7 @@ static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel
        /* Detach; put netif into state similar to hotplug unplug. */
        netif_poll_enable(netdev);
        netif_device_detach(netdev);
+       pci_disable_device(pdev);
 
        /* Request a slot reset. */
        return PCI_ERS_RESULT_NEED_RESET;
@@ -2863,8 +2848,9 @@ static struct pci_driver e100_driver = {
        .id_table =     e100_id_table,
        .probe =        e100_probe,
        .remove =       __devexit_p(e100_remove),
-#ifdef CONFIG_PM
+       /* Power Management hooks */
        .suspend =      e100_suspend,
+#ifdef CONFIG_PM
        .resume =       e100_resume,
 #endif
        .shutdown =     e100_shutdown,
@@ -2877,7 +2863,7 @@ static int __init e100_init_module(void)
                printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
                printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT);
        }
-       return pci_module_init(&e100_driver);
+       return pci_register_driver(&e100_driver);
 }
 
 static void __exit e100_cleanup_module(void)