S2IO: Fixes for reset and link handling.

[powerpc.git] / drivers / net / s2io-regs.h

diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index 542ae15..518e96d 100644 (file)
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -167,6 +167,7 @@ typedef struct _XENA_dev_config {
        u8 unused4[0x08];
 
        u64 gpio_int_reg;
+#define GPIO_INT_REG_DP_ERR_INT                BIT(0)
 #define GPIO_INT_REG_LINK_DOWN                 BIT(1)
 #define GPIO_INT_REG_LINK_UP                   BIT(2)
        u64 gpio_int_mask;
@@ -267,6 +268,21 @@ typedef struct _XENA_dev_config {
 
        /* General Configuration */
        u64 mdio_control;
+#define MDIO_MMD_INDX_ADDR(val)                vBIT(val, 0, 16)
+#define MDIO_MMD_DEV_ADDR(val)         vBIT(val, 19, 5)
+#define MDIO_MMD_PMA_DEV_ADDR          0x1
+#define MDIO_MMD_PMD_DEV_ADDR          0x1
+#define MDIO_MMD_WIS_DEV_ADDR          0x2
+#define MDIO_MMD_PCS_DEV_ADDR          0x3
+#define MDIO_MMD_PHYXS_DEV_ADDR                0x4
+#define MDIO_MMS_PRT_ADDR(val)         vBIT(val, 27, 5)
+#define MDIO_CTRL_START_TRANS(val)     vBIT(val, 56, 4)
+#define MDIO_OP(val)                   vBIT(val, 60, 2)
+#define MDIO_OP_ADDR_TRANS             0x0
+#define MDIO_OP_WRITE_TRANS            0x1
+#define MDIO_OP_READ_POST_INC_TRANS    0x2
+#define MDIO_OP_READ_TRANS             0x3
+#define MDIO_MDIO_DATA(val)            vBIT(val, 32, 16)
 
        u64 dtx_control;
 
@@ -284,6 +300,7 @@ typedef struct _XENA_dev_config {
        u64 gpio_control;
 #define GPIO_CTRL_GPIO_0               BIT(8)
        u64 misc_control;
+#define FAULT_BEHAVIOUR                        BIT(0)
 #define EXT_REQ_EN                     BIT(1)
 #define MISC_LINK_STABILITY_PRD(val)   vBIT(val,29,3)
 
@@ -546,7 +563,12 @@ typedef struct _XENA_dev_config {
 #define RX_PA_CFG_IGNORE_LLC_CTRL          BIT(3)
 #define RX_PA_CFG_IGNORE_L2_ERR            BIT(6)
 
-       u8 unused12[0x700 - 0x1D8];
+       u64 unused_11_1;
+
+       u64 ring_bump_counter1;
+       u64 ring_bump_counter2;
+
+       u8 unused12[0x700 - 0x1F0];
 
        u64 rxdma_debug_ctrl;
 
@@ -635,8 +657,8 @@ typedef struct _XENA_dev_config {
         u64 rmac_addr_cfg;
 #define RMAC_ADDR_UCASTn_EN(n)     mBIT(0)_n(n)
 #define RMAC_ADDR_MCASTn_EN(n)     mBIT(0)_n(n)
-#define RMAC_ADDR_BCAST_EN         vBIT(0)_48 
-#define RMAC_ADDR_ALL_ADDR_EN      vBIT(0)_49 
+#define RMAC_ADDR_BCAST_EN         vBIT(0)_48
+#define RMAC_ADDR_ALL_ADDR_EN      vBIT(0)_49
 */
        u64 tmac_ipg_cfg;