#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.19"
+#define DRV_VERSION "1.20"
#define PFX DRV_NAME " "
/*
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
{ 0 }
};
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
- struct pci_dev *pdev = hw->pdev;
u32 reg;
- pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
- pci_read_config_dword(pdev, PCI_DEV_REG4, ®);
+ reg = sky2_pci_read32(hw, PCI_DEV_REG4);
/* set all bits to 0 except bits 15..12 and 8 */
reg &= P_ASPM_CONTROL_MSK;
- pci_write_config_dword(pdev, PCI_DEV_REG4, reg);
+ sky2_pci_write32(hw, PCI_DEV_REG4, reg);
- pci_read_config_dword(pdev, PCI_DEV_REG5, ®);
+ reg = sky2_pci_read32(hw, PCI_DEV_REG5);
/* set all bits to 0 except bits 28 & 27 */
reg &= P_CTL_TIM_VMAIN_AV_MSK;
- pci_write_config_dword(pdev, PCI_DEV_REG5, reg);
+ sky2_pci_write32(hw, PCI_DEV_REG5, reg);
- pci_write_config_dword(pdev, PCI_CFG_REG_1, 0);
+ sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
/* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
reg = sky2_read32(hw, B2_GP_IO);
/* disable all GMAC IRQ's */
sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
- /* disable PHY IRQs */
- gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
gma_write16(hw, port, GM_MC_ADDR_H2, 0);
static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
{
- struct pci_dev *pdev = hw->pdev;
u32 reg1;
static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
- pci_read_config_dword(pdev, PCI_DEV_REG1, ®1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
/* Turn on/off phy power saving */
if (onoff)
reg1 &= ~phy_power[port];
if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
reg1 |= coma_mode[port];
- pci_write_config_dword(pdev, PCI_DEV_REG1, reg1);
- pci_read_config_dword(pdev, PCI_DEV_REG1, ®1);
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
udelay(100);
}
sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
/* Turn on legacy PCI-Express PME mode */
- pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 |= PCI_Y2_PME_LEGACY;
- pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
/* block receiver */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
*/
if (otherdev && netif_running(otherdev) &&
(cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
- struct sky2_port *osky2 = netdev_priv(otherdev);
u16 cmd;
- pci_read_config_word(hw->pdev, cap + PCI_X_CMD, &cmd);
+ cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
cmd &= ~PCI_X_CMD_MAX_SPLIT;
- pci_write_config_word(hw->pdev, cap + PCI_X_CMD, cmd);
+ sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
- sky2->rx_csum = 0;
- osky2->rx_csum = 0;
}
if (netif_msg_ifup(sky2))
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
- if (hw->flags & SKY2_HW_NEWER_PHY) {
- u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
- u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
-
- switch(sky2->speed) {
- case SPEED_10:
- led |= PHY_M_LEDC_INIT_CTRL(7);
- break;
-
- case SPEED_100:
- led |= PHY_M_LEDC_STA1_CTRL(7);
- break;
-
- case SPEED_1000:
- led |= PHY_M_LEDC_STA0_CTRL(7);
- break;
- }
-
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- }
-
if (netif_msg_link(sky2))
printk(KERN_INFO PFX
"%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
- pci_read_config_word(pdev, PCI_STATUS, &pci_err);
+ pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
pci_err);
- pci_write_config_word(pdev, PCI_STATUS,
+ sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS);
}
if (status & Y2_IS_PCI_EXP) {
/* PCI-Express uncorrectable Error occurred */
- int pos = pci_find_aer_capability(hw->pdev);
+ int aer = pci_find_aer_capability(hw->pdev);
u32 err;
- pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_STATUS, &err);
+ if (aer) {
+ pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS,
+ &err);
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+ } else {
+ /* Either AER not configured, or not working
+ * because of bad MMCONFIG, so just do recover
+ * manually.
+ */
+ err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
+ }
+
if (net_ratelimit())
dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
- pci_cleanup_aer_uncorrect_error_status(pdev);
+
}
if (status & Y2_HWE_L1_MASK)
static int __devinit sky2_init(struct sky2_hw *hw)
{
- int rc;
u8 t8;
/* Enable all clocks and check for bad PCI access */
- rc = pci_write_config_dword(hw->pdev, PCI_DEV_REG3, 0);
- if (rc)
- return rc;
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
sky2_write8(hw, B0_CTST, CS_RST_CLR);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
/* clear PCI errors, if any */
- pci_read_config_word(pdev, PCI_STATUS, &status);
+ status = sky2_pci_read16(hw, PCI_STATUS);
status |= PCI_STATUS_ERROR_BITS;
- pci_write_config_word(pdev, PCI_STATUS, status);
+ sky2_pci_write16(hw, PCI_STATUS, status);
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (cap) {
- /* Check for advanced error reporting */
- pci_cleanup_aer_uncorrect_error_status(pdev);
- pci_cleanup_aer_correct_error_status(pdev);
+ if (pci_find_aer_capability(pdev)) {
+ /* Check for advanced error reporting */
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+ pci_cleanup_aer_correct_error_status(pdev);
+ } else {
+ dev_warn(&pdev->dev,
+ "PCI Express Advanced Error Reporting"
+ " not configured or MMCONFIG problem?\n");
+
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
+ }
/* If error bit is stuck on ignore it */
if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
static int sky2_get_eeprom_len(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
u16 reg2;
- pci_read_config_word(sky2->hw->pdev, PCI_DEV_REG2, ®2);
+ reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
}
-static u32 sky2_vpd_read(struct pci_dev *pdev, int cap, u16 offset)
+static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset)
{
u32 val;
- pci_write_config_word(pdev, cap + PCI_VPD_ADDR, offset);
+ sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
do {
- pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset);
+ offset = sky2_pci_read16(hw, cap + PCI_VPD_ADDR);
} while (!(offset & PCI_VPD_ADDR_F));
- pci_read_config_dword(pdev, cap + PCI_VPD_DATA, &val);
+ val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
return val;
}
-static void sky2_vpd_write(struct pci_dev *pdev, int cap, u16 offset, u32 val)
+static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val)
{
- pci_write_config_word(pdev, cap + PCI_VPD_DATA, val);
- pci_write_config_dword(pdev, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
+ sky2_pci_write16(hw, cap + PCI_VPD_DATA, val);
+ sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
do {
- pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset);
+ offset = sky2_pci_read16(hw, cap + PCI_VPD_ADDR);
} while (offset & PCI_VPD_ADDR_F);
}
eeprom->magic = SKY2_EEPROM_MAGIC;
while (length > 0) {
- u32 val = sky2_vpd_read(sky2->hw->pdev, cap, offset);
+ u32 val = sky2_vpd_read(sky2->hw, cap, offset);
int n = min_t(int, length, sizeof(val));
memcpy(data, &val, n);
int n = min_t(int, length, sizeof(val));
if (n < sizeof(val))
- val = sky2_vpd_read(sky2->hw->pdev, cap, offset);
+ val = sky2_vpd_read(sky2->hw, cap, offset);
memcpy(&val, data, n);
- sky2_vpd_write(sky2->hw->pdev, cap, offset, val);
+ sky2_vpd_write(sky2->hw, cap, offset, val);
length -= n;
data += n;
dev->tx_timeout = sky2_tx_timeout;
dev->watchdog_timeo = TX_WATCHDOG;
#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = sky2_netpoll;
+ if (port == 0)
+ dev->poll_controller = sky2_netpoll;
#endif
sky2 = netdev_priv(dev);
sky2->duplex = -1;
sky2->speed = -1;
sky2->advertising = sky2_supported_modes(hw);
- sky2->rx_csum = 1;
+ sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
sky2->wol = wol;
spin_lock_init(&sky2->phy_lock);
*/
{
u32 reg;
- pci_read_config_dword(pdev,PCI_DEV_REG2, ®);
+ reg = sky2_pci_read32(hw, PCI_DEV_REG2);
reg &= ~PCI_REV_DESC;
- pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
+ sky2_pci_write32(hw, PCI_DEV_REG2, reg);
}
#endif
if (hw->chip_id == CHIP_ID_YUKON_EX ||
hw->chip_id == CHIP_ID_YUKON_EC_U ||
hw->chip_id == CHIP_ID_YUKON_FE_P)
- pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
sky2_reset(hw);
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
projects / powerpc.git / blobdiff