network drivers: eliminate unneeded kill_vid code

[powerpc.git] / drivers / net / spider_net.c

diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index c15e972..b47ad1d 100644 (file)
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -175,12 +175,10 @@ spider_net_setup_aneg(struct spider_net_card *card)
 {
        struct mii_phy *phy = &card->phy;
        u32 advertise = 0;
-       u16 bmcr, bmsr, stat1000, estat;
+       u16 bmsr, estat;
 
-       bmcr     = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMCR);
-       bmsr     = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
-       stat1000 = spider_net_read_phy(card->netdev, phy->mii_id, MII_STAT1000);
-       estat    = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
+       bmsr  = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
+       estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
 
        if (bmsr & BMSR_10HALF)
                advertise |= ADVERTISED_10baseT_Half;
@@ -432,7 +430,8 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
        /* and we need to have it 128 byte aligned, therefore we allocate a
         * bit more */
        /* allocate an skb */
-       descr->skb = dev_alloc_skb(bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
+       descr->skb = netdev_alloc_skb(card->netdev,
+                                     bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
        if (!descr->skb) {
                if (netif_msg_rx_err(card) && net_ratelimit())
                        pr_err("Not enough memory to allocate rx buffer\n");
@@ -1015,12 +1014,12 @@ spider_net_pass_skb_up(struct spider_net_descr *descr,
                 */
        }
 
-       /* pass skb up to stack */
-       netif_receive_skb(skb);
-
        /* update netdevice statistics */
        card->netdev_stats.rx_packets++;
        card->netdev_stats.rx_bytes += skb->len;
+
+       /* pass skb up to stack */
+       netif_receive_skb(skb);
 }
 
 #ifdef DEBUG
@@ -1191,43 +1190,6 @@ spider_net_poll(struct net_device *netdev, int *budget)
        return 1;
 }
 
-/**
- * spider_net_vlan_rx_reg - initializes VLAN structures in the driver and card
- * @netdev: interface device structure
- * @grp: vlan_group structure that is registered (NULL on destroying interface)
- */
-static void
-spider_net_vlan_rx_reg(struct net_device *netdev, struct vlan_group *grp)
-{
-       /* further enhancement... yet to do */
-       return;
-}
-
-/**
- * spider_net_vlan_rx_add - adds VLAN id to the card filter
- * @netdev: interface device structure
- * @vid: VLAN id to add
- */
-static void
-spider_net_vlan_rx_add(struct net_device *netdev, uint16_t vid)
-{
-       /* further enhancement... yet to do */
-       /* add vid to card's VLAN filter table */
-       return;
-}
-
-/**
- * spider_net_vlan_rx_kill - removes VLAN id to the card filter
- * @netdev: interface device structure
- * @vid: VLAN id to remove
- */
-static void
-spider_net_vlan_rx_kill(struct net_device *netdev, uint16_t vid)
-{
-       /* further enhancement... yet to do */
-       /* remove vid from card's VLAN filter table */
-}
-
 /**
  * spider_net_get_stats - get interface statistics
  * @netdev: interface device structure
@@ -2178,9 +2140,6 @@ spider_net_setup_netdev_ops(struct net_device *netdev)
        netdev->poll = &spider_net_poll;
        netdev->weight = SPIDER_NET_NAPI_WEIGHT;
        /* HW VLAN */
-       netdev->vlan_rx_register = &spider_net_vlan_rx_reg;
-       netdev->vlan_rx_add_vid = &spider_net_vlan_rx_add;
-       netdev->vlan_rx_kill_vid = &spider_net_vlan_rx_kill;
 #ifdef CONFIG_NET_POLL_CONTROLLER
        /* poll controller */
        netdev->poll_controller = &spider_net_poll_controller;