module_param_named(noleds, modparam_noleds, int, 0444);
MODULE_PARM_DESC(noleds, "Turn off all LED activity");
-#ifdef CONFIG_BCM43XX_DEBUG
static char modparam_fwpostfix[64];
module_param_string(fwpostfix, modparam_fwpostfix, 64, 0444);
-MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for debugging.");
-#else
-# define modparam_fwpostfix ""
-#endif /* CONFIG_BCM43XX_DEBUG*/
+MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for using multiple firmware image versions.");
/* If you want to debug with just a single device, enable this,
value = sprom[BCM43xx_SPROM_ETHPHY];
bcm->sprom.et0phyaddr = (value & 0x001F);
bcm->sprom.et1phyaddr = (value & 0x03E0) >> 5;
- bcm->sprom.et0mdcport = (value & (1 << 14)) >> 14;
- bcm->sprom.et1mdcport = (value & (1 << 15)) >> 15;
/* boardrev, antennas, locale */
value = sprom[BCM43xx_SPROM_BOARDREV];
sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI);
/* extract core_id, core_rev, core_vendor */
- core_id = (sb_id_hi & 0xFFF0) >> 4;
- core_rev = (sb_id_hi & 0xF);
+ core_id = (sb_id_hi & 0x8FF0) >> 4;
+ core_rev = ((sb_id_hi & 0xF) | ((sb_id_hi & 0x7000) >> 8));
core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x\n",
sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
- sbimconfiglow |= 0x32;
+ if (bcm->bustype == BCM43xx_BUSTYPE_PCI)
+ sbimconfiglow |= 0x32;
+ else
+ sbimconfiglow |= 0x53;
bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow);
}
err = bcm43xx_pctl_set_crystal(bcm, 1);
if (err)
goto out;
- bcm43xx_pci_read_config16(bcm, PCI_STATUS, &pci_status);
- bcm43xx_pci_write_config16(bcm, PCI_STATUS, pci_status & ~PCI_STATUS_SIG_TARGET_ABORT);
+ err = bcm43xx_pci_read_config16(bcm, PCI_STATUS, &pci_status);
+ if (err)
+ goto out;
+ err = bcm43xx_pci_write_config16(bcm, PCI_STATUS, pci_status & ~PCI_STATUS_SIG_TARGET_ABORT);
out:
return err;
if (err)
goto out;
- if (bcm->current_core->rev < 6 ||
+ if (bcm->current_core->rev < 6 &&
bcm->current_core->id == BCM43xx_COREID_PCI) {
value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC);
value |= (1 << backplane_flag_nr);
}
net_dev->base_addr = (unsigned long)bcm->mmio_addr;
- bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_VENDOR_ID,
+ err = bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_VENDOR_ID,
&bcm->board_vendor);
- bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_ID,
+ if (err)
+ goto err_iounmap;
+ err = bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_ID,
&bcm->board_type);
- bcm43xx_pci_read_config16(bcm, PCI_REVISION_ID,
+ if (err)
+ goto err_iounmap;
+ err = bcm43xx_pci_read_config16(bcm, PCI_REVISION_ID,
&bcm->board_revision);
+ if (err)
+ goto err_iounmap;
err = bcm43xx_chipset_attach(bcm);
if (err)
pci_release_regions(pci_dev);
err_pci_disable:
pci_disable_device(pci_dev);
+ printk(KERN_ERR PFX "Unable to attach board\n");
goto out;
}