*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/proc_fs.h>
#include <linux/pci.h>
#include "../pci.h"
#include "shpchp.h"
+static void program_fw_provided_values(struct pci_dev *dev)
+{
+ u16 pci_cmd, pci_bctl;
+ struct pci_dev *cdev;
+ struct hotplug_params hpp = {0x8, 0x40, 0, 0}; /* defaults */
+
+ /* Program hpp values for this device */
+ if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
+ (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
+ (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
+ return;
+
+ get_hp_params_from_firmware(dev, &hpp);
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp.cache_line_size);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.latency_timer);
+ pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+ if (hpp.enable_serr)
+ pci_cmd |= PCI_COMMAND_SERR;
+ else
+ pci_cmd &= ~PCI_COMMAND_SERR;
+ if (hpp.enable_perr)
+ pci_cmd |= PCI_COMMAND_PARITY;
+ else
+ pci_cmd &= ~PCI_COMMAND_PARITY;
+ pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+
+ /* Program bridge control value and child devices */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
+ hpp.latency_timer);
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
+ if (hpp.enable_serr)
+ pci_bctl |= PCI_BRIDGE_CTL_SERR;
+ else
+ pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
+ if (hpp.enable_perr)
+ pci_bctl |= PCI_BRIDGE_CTL_PARITY;
+ else
+ pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
+ if (dev->subordinate) {
+ list_for_each_entry(cdev, &dev->subordinate->devices,
+ bus_list)
+ program_fw_provided_values(cdev);
+ }
+ }
+}
+
int shpchp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
child->subordinate = pci_do_scan_bus(child);
pci_bus_size_bridges(child);
}
- /* TBD: program firmware provided _HPP values */
- /* program_fw_provided_values(dev); */
+ program_fw_provided_values(dev);
}
pci_bus_assign_resources(parent);
return 0;
}
-int shpchp_unconfigure_device(struct pci_func* func)
+int shpchp_unconfigure_device(struct slot *p_slot)
{
int rc = 0;
int j;
+ u8 bctl = 0;
- dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus,
- func->device, func->function);
+ dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus, p_slot->device);
for (j=0; j<8 ; j++) {
- struct pci_dev* temp = pci_find_slot(func->bus,
- (func->device << 3) | j);
- if (temp) {
- pci_remove_bus_device(temp);
+ struct pci_dev* temp = pci_find_slot(p_slot->bus,
+ (p_slot->device << 3) | j);
+ if (!temp)
+ continue;
+ if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+ err("Cannot remove display device %s\n",
+ pci_name(temp));
+ continue;
}
- }
- return rc;
-}
-
-/* More PCI configuration routines; this time centered around hotplug controller */
-
-
-/*
- * shpchp_save_config
- *
- * Reads configuration for all slots in a PCI bus and saves info.
- *
- * Note: For non-hot plug busses, the slot # saved is the device #
- *
- * returns 0 if success
- */
-int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num)
-{
- int rc;
- u8 class_code;
- u8 header_type;
- u32 ID;
- u8 secondary_bus;
- struct pci_func *new_slot;
- int sub_bus;
- int FirstSupported;
- int LastSupported;
- int max_functions;
- int function;
- u8 DevError;
- int device = 0;
- int cloop = 0;
- int stop_it;
- int index;
- int is_hot_plug = num_ctlr_slots || first_device_num;
- struct pci_bus lpci_bus, *pci_bus;
-
- dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
- num_ctlr_slots, first_device_num);
-
- memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
-
- dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
- num_ctlr_slots, first_device_num);
-
- /* Decide which slots are supported */
- if (is_hot_plug) {
- /*********************************
- * is_hot_plug is the slot mask
- *********************************/
- FirstSupported = first_device_num;
- LastSupported = FirstSupported + num_ctlr_slots - 1;
- } else {
- FirstSupported = 0;
- LastSupported = 0x1F;
- }
-
- dbg("FirstSupported = %d, LastSupported = %d\n", FirstSupported,
- LastSupported);
-
- /* Save PCI configuration space for all devices in supported slots */
- pci_bus->number = busnumber;
- for (device = FirstSupported; device <= LastSupported; device++) {
- ID = 0xFFFFFFFF;
- rc = pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0),
- PCI_VENDOR_ID, &ID);
-
- if (ID != 0xFFFFFFFF) { /* device in slot */
- rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
- 0x0B, &class_code);
- if (rc)
- return rc;
-
- rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
- PCI_HEADER_TYPE, &header_type);
- if (rc)
- return rc;
-
- dbg("class_code = %x, header_type = %x\n", class_code, header_type);
-
- /* If multi-function device, set max_functions to 8 */
- if (header_type & 0x80)
- max_functions = 8;
- else
- max_functions = 1;
-
- function = 0;
-
- do {
- DevError = 0;
-
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* P-P Bridge */
- /* Recurse the subordinate bus
- * get the subordinate bus number
- */
- rc = pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(device, function),
- PCI_SECONDARY_BUS, &secondary_bus);
- if (rc) {
- return rc;
- } else {
- sub_bus = (int) secondary_bus;
-
- /* Save secondary bus cfg spc with this recursive call. */
- rc = shpchp_save_config(ctrl, sub_bus, 0, 0);
- if (rc)
- return rc;
- }
- }
-
- index = 0;
- new_slot = shpchp_slot_find(busnumber, device, index++);
-
- dbg("new_slot = %p\n", new_slot);
-
- while (new_slot && (new_slot->function != (u8) function)) {
- new_slot = shpchp_slot_find(busnumber, device, index++);
- dbg("new_slot = %p\n", new_slot);
- }
- if (!new_slot) {
- /* Setup slot structure. */
- new_slot = shpchp_slot_create(busnumber);
- dbg("new_slot = %p\n", new_slot);
-
- if (new_slot == NULL)
- return(1);
- }
-
- new_slot->bus = (u8) busnumber;
- new_slot->device = (u8) device;
- new_slot->function = (u8) function;
- new_slot->is_a_board = 1;
- new_slot->switch_save = 0x10;
- new_slot->pwr_save = 1;
- /* In case of unsupported board */
- new_slot->status = DevError;
- new_slot->pci_dev = pci_find_slot(new_slot->bus,
- (new_slot->device << 3) | new_slot->function);
- dbg("new_slot->pci_dev = %p\n", new_slot->pci_dev);
-
- for (cloop = 0; cloop < 0x20; cloop++) {
- rc = pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(device, function),
- cloop << 2,
- (u32 *) &(new_slot->config_space [cloop]));
- /* dbg("new_slot->config_space[%x] = %x\n",
- cloop, new_slot->config_space[cloop]); */
- if (rc)
- return rc;
- }
-
- function++;
-
- stop_it = 0;
-
- /* this loop skips to the next present function
- * reading in Class Code and Header type.
- */
-
- while ((function < max_functions)&&(!stop_it)) {
- rc = pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(device, function),
- PCI_VENDOR_ID, &ID);
-
- if (ID == 0xFFFFFFFF) { /* nothing there. */
- function++;
- dbg("Nothing there\n");
- } else { /* Something there */
- rc = pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(device, function),
- 0x0B, &class_code);
- if (rc)
- return rc;
-
- rc = pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(device, function),
- PCI_HEADER_TYPE, &header_type);
- if (rc)
- return rc;
-
- dbg("class_code = %x, header_type = %x\n",
- class_code, header_type);
- stop_it++;
- }
- }
-
- } while (function < max_functions);
- /* End of IF (device in slot?) */
- } else if (is_hot_plug) {
- /* Setup slot structure with entry for empty slot */
- new_slot = shpchp_slot_create(busnumber);
-
- if (new_slot == NULL) {
- return(1);
+ if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
+ if (bctl & PCI_BRIDGE_CTL_VGA) {
+ err("Cannot remove display device %s\n",
+ pci_name(temp));
+ continue;
}
- dbg("new_slot = %p\n", new_slot);
-
- new_slot->bus = (u8) busnumber;
- new_slot->device = (u8) device;
- new_slot->function = 0;
- new_slot->is_a_board = 0;
- new_slot->presence_save = 0;
- new_slot->switch_save = 0;
}
- } /* End of FOR loop */
-
- return(0);
-}
-
-
-/*
- * shpchp_save_slot_config
- *
- * Saves configuration info for all PCI devices in a given slot
- * including subordinate busses.
- *
- * returns 0 if success
- */
-int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot)
-{
- int rc;
- u8 class_code;
- u8 header_type;
- u32 ID;
- u8 secondary_bus;
- int sub_bus;
- int max_functions;
- int function;
- int cloop = 0;
- int stop_it;
- struct pci_bus lpci_bus, *pci_bus;
- memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = new_slot->bus;
-
- ID = 0xFFFFFFFF;
-
- pci_bus_read_config_dword(pci_bus, PCI_DEVFN(new_slot->device, 0),
- PCI_VENDOR_ID, &ID);
-
- if (ID != 0xFFFFFFFF) { /* device in slot */
- pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
- 0x0B, &class_code);
-
- pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
- PCI_HEADER_TYPE, &header_type);
-
- if (header_type & 0x80) /* Multi-function device */
- max_functions = 8;
- else
- max_functions = 1;
-
- function = 0;
-
- do {
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
- /* Recurse the subordinate bus */
- pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- PCI_SECONDARY_BUS, &secondary_bus);
-
- sub_bus = (int) secondary_bus;
-
- /* Save the config headers for the secondary bus. */
- rc = shpchp_save_config(ctrl, sub_bus, 0, 0);
-
- if (rc)
- return rc;
-
- } /* End of IF */
-
- new_slot->status = 0;
-
- for (cloop = 0; cloop < 0x20; cloop++) {
- pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- cloop << 2,
- (u32 *) &(new_slot->config_space [cloop]));
- }
-
- function++;
-
- stop_it = 0;
-
- /* this loop skips to the next present function
- * reading in the Class Code and the Header type.
- */
-
- while ((function < max_functions) && (!stop_it)) {
- pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- PCI_VENDOR_ID, &ID);
-
- if (ID == 0xFFFFFFFF) { /* nothing there. */
- function++;
- } else { /* Something there */
- pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- 0x0B, &class_code);
-
- pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- PCI_HEADER_TYPE, &header_type);
-
- stop_it++;
- }
- }
-
- } while (function < max_functions);
- } /* End of IF (device in slot?) */
- else {
- return 2;
+ pci_remove_bus_device(temp);
}
-
- return 0;
+ return rc;
}
projects / powerpc.git / blobdiff