Merge /spare/repo/linux-2.6/

[powerpc.git] / drivers / pci / pci.c

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 93ec158..259d247 100644 (file)
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -294,7 +294,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
                return -EIO; 
 
        pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
-       if ((pmc & PCI_PM_CAP_VER_MASK) > 2) {
+       if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
                printk(KERN_DEBUG
                       "PCI: %s has unsupported PM cap regs version (%u)\n",
                       pci_name(dev), pmc & PCI_PM_CAP_VER_MASK);
@@ -302,26 +302,32 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
        }
 
        /* check if this device supports the desired state */
-       if (state == PCI_D1 || state == PCI_D2) {
-               if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
-                       return -EIO;
-               else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
-                       return -EIO;
-       }
+       if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
+               return -EIO;
+       else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
+               return -EIO;
 
        pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
 
-       /* If we're in D3, force entire word to 0.
+       /* If we're (effectively) in D3, force entire word to 0.
         * This doesn't affect PME_Status, disables PME_En, and
         * sets PowerState to 0.
         */
-       if (dev->current_state >= PCI_D3hot) {
-               if (!(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+       switch (dev->current_state) {
+       case PCI_UNKNOWN: /* Boot-up */
+               if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
+                && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
                        need_restore = 1;
+               /* Fall-through: force to D0 */
+       case PCI_D3hot:
+       case PCI_D3cold:
+       case PCI_POWER_ERROR:
                pmcsr = 0;
-       } else {
+               break;
+       default:
                pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
                pmcsr |= state;
+               break;
        }
 
        /* enter specified state */
@@ -444,8 +450,11 @@ pci_enable_device_bars(struct pci_dev *dev, int bars)
 {
        int err;
 
-       pci_set_power_state(dev, PCI_D0);
-       if ((err = pcibios_enable_device(dev, bars)) < 0)
+       err = pci_set_power_state(dev, PCI_D0);
+       if (err < 0 && err != -EIO)
+               return err;
+       err = pcibios_enable_device(dev, bars);
+       if (err < 0)
                return err;
        return 0;
 }
@@ -797,6 +806,31 @@ pci_clear_mwi(struct pci_dev *dev)
        }
 }
 
+/**
+ * pci_intx - enables/disables PCI INTx for device dev
+ * @dev: the PCI device to operate on
+ * @enable: boolean
+ *
+ * Enables/disables PCI INTx for device dev
+ */
+void
+pci_intx(struct pci_dev *pdev, int enable)
+{
+       u16 pci_command, new;
+
+       pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
+
+       if (enable) {
+               new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
+       } else {
+               new = pci_command | PCI_COMMAND_INTX_DISABLE;
+       }
+
+       if (new != pci_command) {
+               pci_write_config_word(pdev, PCI_COMMAND, new);
+       }
+}
+
 #ifndef HAVE_ARCH_PCI_SET_DMA_MASK
 /*
  * These can be overridden by arch-specific implementations
@@ -874,6 +908,7 @@ EXPORT_SYMBOL(pci_request_region);
 EXPORT_SYMBOL(pci_set_master);
 EXPORT_SYMBOL(pci_set_mwi);
 EXPORT_SYMBOL(pci_clear_mwi);
+EXPORT_SYMBOL_GPL(pci_intx);
 EXPORT_SYMBOL(pci_set_dma_mask);
 EXPORT_SYMBOL(pci_set_consistent_dma_mask);
 EXPORT_SYMBOL(pci_assign_resource);