if (state > PCI_D3hot)
state = PCI_D3hot;
+ /*
+ * If the device or the parent bridge can't support PCI PM, ignore
+ * the request if we're doing anything besides putting it into D0
+ * (which would only happen on boot).
+ */
+ if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+ return 0;
+
/* Validate current state:
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
} else if (dev->current_state == state)
return 0; /* we're already there */
- /*
- * If the device or the parent bridge can't support PCI PM, ignore
- * the request if we're doing anything besides putting it into D0
- * (which would only happen on boot).
- */
- if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
- return 0;
/* find PCI PM capability in list */
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
if ((i = pci_save_msi_state(dev)) != 0)
return i;
- if ((i = pci_save_msix_state(dev)) != 0)
- return i;
if ((i = pci_save_pcie_state(dev)) != 0)
return i;
if ((i = pci_save_pcix_state(dev)) != 0)
}
pci_restore_pcix_state(dev);
pci_restore_msi_state(dev);
- pci_restore_msix_state(dev);
+
+ return 0;
+}
+
+static int do_pci_enable_device(struct pci_dev *dev, int bars)
+{
+ int err;
+
+ err = pci_set_power_state(dev, PCI_D0);
+ if (err < 0 && err != -EIO)
+ return err;
+ err = pcibios_enable_device(dev, bars);
+ if (err < 0)
+ return err;
+ pci_fixup_device(pci_fixup_enable, dev);
+
+ return 0;
+}
+
+/**
+ * __pci_reenable_device - Resume abandoned device
+ * @dev: PCI device to be resumed
+ *
+ * Note this function is a backend of pci_default_resume and is not supposed
+ * to be called by normal code, write proper resume handler and use it instead.
+ */
+int
+__pci_reenable_device(struct pci_dev *dev)
+{
+ if (atomic_read(&dev->enable_cnt))
+ return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
return 0;
}
if (atomic_add_return(1, &dev->enable_cnt) > 1)
return 0; /* already enabled */
- err = pci_set_power_state(dev, PCI_D0);
- if (err < 0 && err != -EIO)
- goto err_out;
- err = pcibios_enable_device(dev, bars);
+ err = do_pci_enable_device(dev, bars);
if (err < 0)
- goto err_out;
- pci_fixup_device(pci_fixup_enable, dev);
-
-err_out:
- atomic_dec(&dev->enable_cnt);
+ atomic_dec(&dev->enable_cnt);
return err;
}
return -EBUSY;
}
+/**
+ * pci_release_selected_regions - Release selected PCI I/O and memory resources
+ * @pdev: PCI device whose resources were previously reserved
+ * @bars: Bitmask of BARs to be released
+ *
+ * Release selected PCI I/O and memory resources previously reserved.
+ * Call this function only after all use of the PCI regions has ceased.
+ */
+void pci_release_selected_regions(struct pci_dev *pdev, int bars)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ if (bars & (1 << i))
+ pci_release_region(pdev, i);
+}
+
+/**
+ * pci_request_selected_regions - Reserve selected PCI I/O and memory resources
+ * @pdev: PCI device whose resources are to be reserved
+ * @bars: Bitmask of BARs to be requested
+ * @res_name: Name to be associated with resource
+ */
+int pci_request_selected_regions(struct pci_dev *pdev, int bars,
+ const char *res_name)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ if (bars & (1 << i))
+ if(pci_request_region(pdev, i, res_name))
+ goto err_out;
+ return 0;
+
+err_out:
+ while(--i >= 0)
+ if (bars & (1 << i))
+ pci_release_region(pdev, i);
+
+ return -EBUSY;
+}
/**
* pci_release_regions - Release reserved PCI I/O and memory resources
void pci_release_regions(struct pci_dev *pdev)
{
- int i;
-
- for (i = 0; i < 6; i++)
- pci_release_region(pdev, i);
+ pci_release_selected_regions(pdev, (1 << 6) - 1);
}
/**
*/
int pci_request_regions(struct pci_dev *pdev, const char *res_name)
{
- int i;
-
- for (i = 0; i < 6; i++)
- if(pci_request_region(pdev, i, res_name))
- goto err_out;
- return 0;
-
-err_out:
- while(--i >= 0)
- pci_release_region(pdev, i);
-
- return -EBUSY;
+ return pci_request_selected_regions(pdev, ((1 << 6) - 1), res_name);
}
/**
return 0;
}
#endif
-
+
+/**
+ * pci_select_bars - Make BAR mask from the type of resource
+ * @pdev: the PCI device for which BAR mask is made
+ * @flags: resource type mask to be selected
+ *
+ * This helper routine makes bar mask from the type of resource.
+ */
+int pci_select_bars(struct pci_dev *dev, unsigned long flags)
+{
+ int i, bars = 0;
+ for (i = 0; i < PCI_NUM_RESOURCES; i++)
+ if (pci_resource_flags(dev, i) & flags)
+ bars |= (1 << i);
+ return bars;
+}
+
static int __devinit pci_init(void)
{
struct pci_dev *dev = NULL;
device_initcall(pci_init);
-#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
-/* FIXME: Some boxes have multiple ISA bridges! */
-struct pci_dev *isa_bridge;
-EXPORT_SYMBOL(isa_bridge);
-#endif
-
EXPORT_SYMBOL_GPL(pci_restore_bars);
EXPORT_SYMBOL(pci_enable_device_bars);
EXPORT_SYMBOL(pci_enable_device);
EXPORT_SYMBOL(pci_request_regions);
EXPORT_SYMBOL(pci_release_region);
EXPORT_SYMBOL(pci_request_region);
+EXPORT_SYMBOL(pci_release_selected_regions);
+EXPORT_SYMBOL(pci_request_selected_regions);
EXPORT_SYMBOL(pci_set_master);
EXPORT_SYMBOL(pci_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
EXPORT_SYMBOL(pci_set_consistent_dma_mask);
EXPORT_SYMBOL(pci_assign_resource);
EXPORT_SYMBOL(pci_find_parent_resource);
+EXPORT_SYMBOL(pci_select_bars);
EXPORT_SYMBOL(pci_set_power_state);
EXPORT_SYMBOL(pci_save_state);
EXPORT_SYMBOL(pci_restore_state);
EXPORT_SYMBOL(pci_enable_wake);
-/* Quirk info */
-
-EXPORT_SYMBOL(isa_dma_bridge_buggy);
-EXPORT_SYMBOL(pci_pci_problems);
projects / powerpc.git / blobdiff