#define to_cycles(ns) ((ns)/120)
#define to_ns(cycles) ((cycles)*120)
+/**
+ * yenta PCI irq probing.
+ * currently only used in the TI/EnE initialization code
+ */
+#ifdef CONFIG_YENTA_TI
static int yenta_probe_cb_irq(struct yenta_socket *socket);
+#endif
static unsigned int override_bios;
readb(socket->base + 0x800 + reg + 1);
}
+static ssize_t show_yenta_registers(struct device *yentadev, struct device_attribute *attr, char *buf)
+{
+ struct pci_dev *dev = to_pci_dev(yentadev);
+ struct yenta_socket *socket = pci_get_drvdata(dev);
+ int offset = 0, i;
+
+ offset = snprintf(buf, PAGE_SIZE, "CB registers:");
+ for (i = 0; i < 0x24; i += 4) {
+ unsigned val;
+ if (!(i & 15))
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+ val = cb_readl(socket, i);
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, " %08x", val);
+ }
+
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:");
+ for (i = 0; i < 0x45; i++) {
+ unsigned char val;
+ if (!(i & 7)) {
+ if (i & 8) {
+ memcpy(buf + offset, " -", 2);
+ offset += 2;
+ } else
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+ }
+ val = exca_readb(socket, i);
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, " %02x", val);
+ }
+ buf[offset++] = '\n';
+ return offset;
+}
+
+static DEVICE_ATTR(yenta_registers, S_IRUSR, show_yenta_registers, NULL);
+
/*
* Ugh, mixed-mode cardbus and 16-bit pccard state: things depend
* on what kind of card is inserted..
return 0;
}
-static void yenta_get_power(struct yenta_socket *socket, socket_state_t *state)
-{
- if (!(cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) &&
- (socket->flags & YENTA_16BIT_POWER_EXCA)) {
- u8 reg, vcc, vpp;
-
- reg = exca_readb(socket, I365_POWER);
- vcc = reg & I365_VCC_MASK;
- vpp = reg & I365_VPP1_MASK;
- state->Vcc = state->Vpp = 0;
-
- if (socket->flags & YENTA_16BIT_POWER_DF) {
- if (vcc == I365_VCC_3V)
- state->Vcc = 33;
- if (vcc == I365_VCC_5V)
- state->Vcc = 50;
- if (vpp == I365_VPP1_5V)
- state->Vpp = state->Vcc;
- if (vpp == I365_VPP1_12V)
- state->Vpp = 120;
- } else {
- if (reg & I365_VCC_5V) {
- state->Vcc = 50;
- if (vpp == I365_VPP1_5V)
- state->Vpp = 50;
- if (vpp == I365_VPP1_12V)
- state->Vpp = 120;
- }
- }
- } else {
- u32 control;
-
- control = cb_readl(socket, CB_SOCKET_CONTROL);
-
- switch (control & CB_SC_VCC_MASK) {
- case CB_SC_VCC_5V: state->Vcc = 50; break;
- case CB_SC_VCC_3V: state->Vcc = 33; break;
- default: state->Vcc = 0;
- }
-
- switch (control & CB_SC_VPP_MASK) {
- case CB_SC_VPP_12V: state->Vpp = 120; break;
- case CB_SC_VPP_5V: state->Vpp = 50; break;
- case CB_SC_VPP_3V: state->Vpp = 33; break;
- default: state->Vpp = 0;
- }
- }
-}
-
-static int yenta_get_socket(struct pcmcia_socket *sock, socket_state_t *state)
-{
- struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
- u8 reg;
- u32 control;
-
- control = cb_readl(socket, CB_SOCKET_CONTROL);
-
- yenta_get_power(socket, state);
- state->io_irq = socket->io_irq;
-
- if (cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) {
- u16 bridge = config_readw(socket, CB_BRIDGE_CONTROL);
- if (bridge & CB_BRIDGE_CRST)
- state->flags |= SS_RESET;
- return 0;
- }
-
- /* 16-bit card state.. */
- reg = exca_readb(socket, I365_POWER);
- state->flags = (reg & I365_PWR_AUTO) ? SS_PWR_AUTO : 0;
- state->flags |= (reg & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0;
-
- reg = exca_readb(socket, I365_INTCTL);
- state->flags |= (reg & I365_PC_RESET) ? 0 : SS_RESET;
- state->flags |= (reg & I365_PC_IOCARD) ? SS_IOCARD : 0;
-
- reg = exca_readb(socket, I365_CSCINT);
- state->csc_mask = (reg & I365_CSC_DETECT) ? SS_DETECT : 0;
- if (state->flags & SS_IOCARD) {
- state->csc_mask |= (reg & I365_CSC_STSCHG) ? SS_STSCHG : 0;
- } else {
- state->csc_mask |= (reg & I365_CSC_BVD1) ? SS_BATDEAD : 0;
- state->csc_mask |= (reg & I365_CSC_BVD2) ? SS_BATWARN : 0;
- state->csc_mask |= (reg & I365_CSC_READY) ? SS_READY : 0;
- }
-
- return 0;
-}
-
static void yenta_set_power(struct yenta_socket *socket, socket_state_t *state)
{
/* some birdges require to use the ExCA registers to power 16bit cards */
csc = exca_readb(socket, I365_CSC);
+ if (!(cb_event || csc))
+ return IRQ_NONE;
+
events = (cb_event & (CB_CD1EVENT | CB_CD2EVENT)) ? SS_DETECT : 0 ;
events |= (csc & I365_CSC_DETECT) ? SS_DETECT : 0;
if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) {
if (events)
pcmcia_parse_events(&socket->socket, events);
- if (cb_event || csc)
- return IRQ_HANDLED;
-
- return IRQ_NONE;
+ return IRQ_HANDLED;
}
static void yenta_interrupt_wrapper(unsigned long data)
static int yenta_sock_init(struct pcmcia_socket *sock)
{
struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
- u16 bridge;
-
- bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~CB_BRIDGE_INTR;
- if (!socket->cb_irq)
- bridge |= CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge);
exca_writeb(socket, I365_GBLCTL, 0x00);
exca_writeb(socket, I365_GENCTL, 0x00);
{
struct yenta_socket *sock = pci_get_drvdata(dev);
+ /* Remove the register attributes */
+ device_remove_file(&dev->dev, &dev_attr_yenta_registers);
+
/* we don't want a dying socket registered */
pcmcia_unregister_socket(&sock->socket);
.init = yenta_sock_init,
.suspend = yenta_sock_suspend,
.get_status = yenta_get_status,
- .get_socket = yenta_get_socket,
.set_socket = yenta_set_socket,
.set_io_map = yenta_set_io_map,
.set_mem_map = yenta_set_mem_map,
};
+#ifdef CONFIG_YENTA_TI
#include "ti113x.h"
+#endif
+#ifdef CONFIG_YENTA_RICOH
#include "ricoh.h"
+#endif
+#ifdef CONFIG_YENTA_TOSHIBA
#include "topic.h"
+#endif
+#ifdef CONFIG_YENTA_O2
#include "o2micro.h"
+#endif
enum {
CARDBUS_TYPE_DEFAULT = -1,
CARDBUS_TYPE_TOPIC95,
CARDBUS_TYPE_TOPIC97,
CARDBUS_TYPE_O2MICRO,
+ CARDBUS_TYPE_ENE,
};
/*
* initialization sequences etc details. List them here..
*/
static struct cardbus_type cardbus_type[] = {
+#ifdef CONFIG_YENTA_TI
[CARDBUS_TYPE_TI] = {
.override = ti_override,
.save_state = ti_save_state,
.restore_state = ti_restore_state,
.sock_init = ti_init,
},
+#endif
+#ifdef CONFIG_YENTA_RICOH
[CARDBUS_TYPE_RICOH] = {
.override = ricoh_override,
.save_state = ricoh_save_state,
.restore_state = ricoh_restore_state,
},
+#endif
+#ifdef CONFIG_YENTA_TOSHIBA
[CARDBUS_TYPE_TOPIC95] = {
.override = topic95_override,
},
[CARDBUS_TYPE_TOPIC97] = {
.override = topic97_override,
},
+#endif
+#ifdef CONFIG_YENTA_O2
[CARDBUS_TYPE_O2MICRO] = {
.override = o2micro_override,
.restore_state = o2micro_restore_state,
},
+#endif
+#ifdef CONFIG_YENTA_TI
+ [CARDBUS_TYPE_ENE] = {
+ .override = ene_override,
+ .save_state = ti_save_state,
+ .restore_state = ti_restore_state,
+ .sock_init = ti_init,
+ },
+#endif
};
{
int i;
unsigned long val;
- u16 bridge_ctrl;
u32 mask;
- /* Set up ISA irq routing to probe the ISA irqs.. */
- bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
- if (!(bridge_ctrl & CB_BRIDGE_INTR)) {
- bridge_ctrl |= CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
- }
-
/*
* Probe for usable interrupts using the force
* register to generate bogus card status events.
mask = probe_irq_mask(val) & 0xffff;
- bridge_ctrl &= ~CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-
return mask;
}
+/**
+ * yenta PCI irq probing.
+ * currently only used in the TI/EnE initialization code
+ */
+#ifdef CONFIG_YENTA_TI
+
/* interrupt handler, only used during probing */
static irqreturn_t yenta_probe_handler(int irq, void *dev_id, struct pt_regs *regs)
{
/* probes the PCI interrupt, use only on override functions */
static int yenta_probe_cb_irq(struct yenta_socket *socket)
{
- u16 bridge_ctrl;
-
if (!socket->cb_irq)
return -1;
socket->probe_status = 0;
- /* disable ISA interrupts */
- bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
- bridge_ctrl &= ~CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-
if (request_irq(socket->cb_irq, yenta_probe_handler, SA_SHIRQ, "yenta", socket)) {
printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
return -1;
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS);
-
+
msleep(100);
/* disable interrupts */
return (int) socket->probe_status;
}
+#endif /* CONFIG_YENTA_TI */
/*
{
u16 bridge;
struct pci_dev *dev = socket->dev;
+ struct pci_bus_region region;
- pci_set_power_state(socket->dev, 0);
+ pcibios_resource_to_bus(socket->dev, ®ion, &dev->resource[0]);
config_writel(socket, CB_LEGACY_MODE_BASE, 0);
- config_writel(socket, PCI_BASE_ADDRESS_0, dev->resource[0].start);
+ config_writel(socket, PCI_BASE_ADDRESS_0, region.start);
config_writew(socket, PCI_COMMAND,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
* - PCI interrupts enabled if a PCI interrupt exists..
*/
bridge = config_readw(socket, CB_BRIDGE_CONTROL);
- bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_INTR | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
- bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN | CB_BRIDGE_INTR;
+ bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
+ bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN;
config_writew(socket, CB_BRIDGE_CONTROL, bridge);
}
return -ENODEV;
}
- socket = kmalloc(sizeof(struct yenta_socket), GFP_KERNEL);
+ socket = kzalloc(sizeof(struct yenta_socket), GFP_KERNEL);
if (!socket)
return -ENOMEM;
- memset(socket, 0, sizeof(*socket));
/* prepare pcmcia_socket */
socket->socket.ops = ¥ta_socket_operations;
/* Register it with the pcmcia layer.. */
ret = pcmcia_register_socket(&socket->socket);
- if (ret == 0)
+ if (ret == 0) {
+ /* Add the yenta register attributes */
+ device_create_file(&dev->dev, &dev_attr_yenta_registers);
goto out;
+ }
unmap:
iounmap(socket->base);
* advanced overrides instead. (I can't get the
* data sheets for these devices. --rmk)
*/
+#ifdef CONFIG_YENTA_TI
CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1210, TI),
CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1130, TI113X),
CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250),
CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, TI12XX),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, TI12XX),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, TI1250),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, TI12XX),
-
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX21_XX11, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X515, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X420, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X620, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7410, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7510, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7610, TI12XX),
+
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_710, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_712, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_720, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_722, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE),
+#endif /* CONFIG_YENTA_TI */
+
+#ifdef CONFIG_YENTA_RICOH
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C475, RICOH),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, RICOH),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C478, RICOH),
+#endif
+#ifdef CONFIG_YENTA_TOSHIBA
CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC95, TOPIC95),
CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC97, TOPIC97),
CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC100, TOPIC97),
+#endif
+#ifdef CONFIG_YENTA_O2
CB_ID(PCI_VENDOR_ID_O2, PCI_ANY_ID, O2MICRO),
+#endif
/* match any cardbus bridge */
CB_ID(PCI_ANY_ID, PCI_ANY_ID, DEFAULT),
projects / powerpc.git / blobdiff