readb(socket->base + 0x800 + reg + 1);
}
+static ssize_t show_yenta_registers(struct device *yentadev, struct device_attribute *attr, char *buf)
+{
+ struct pci_dev *dev = to_pci_dev(yentadev);
+ struct yenta_socket *socket = pci_get_drvdata(dev);
+ int offset = 0, i;
+
+ offset = snprintf(buf, PAGE_SIZE, "CB registers:");
+ for (i = 0; i < 0x24; i += 4) {
+ unsigned val;
+ if (!(i & 15))
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+ val = cb_readl(socket, i);
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, " %08x", val);
+ }
+
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:");
+ for (i = 0; i < 0x45; i++) {
+ unsigned char val;
+ if (!(i & 7)) {
+ if (i & 8) {
+ memcpy(buf + offset, " -", 2);
+ offset += 2;
+ } else
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+ }
+ val = exca_readb(socket, i);
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, " %02x", val);
+ }
+ buf[offset++] = '\n';
+ return offset;
+}
+
+static DEVICE_ATTR(yenta_registers, S_IRUSR, show_yenta_registers, NULL);
+
/*
* Ugh, mixed-mode cardbus and 16-bit pccard state: things depend
* on what kind of card is inserted..
static int yenta_sock_init(struct pcmcia_socket *sock)
{
struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
- u16 bridge;
-
- bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~CB_BRIDGE_INTR;
- if (!socket->cb_irq)
- bridge |= CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge);
exca_writeb(socket, I365_GBLCTL, 0x00);
exca_writeb(socket, I365_GENCTL, 0x00);
{
struct yenta_socket *sock = pci_get_drvdata(dev);
+ /* Remove the register attributes */
+ device_remove_file(&dev->dev, &dev_attr_yenta_registers);
+
/* we don't want a dying socket registered */
pcmcia_unregister_socket(&sock->socket);
CARDBUS_TYPE_TOPIC95,
CARDBUS_TYPE_TOPIC97,
CARDBUS_TYPE_O2MICRO,
+ CARDBUS_TYPE_ENE,
};
/*
.override = o2micro_override,
.restore_state = o2micro_restore_state,
},
+ [CARDBUS_TYPE_ENE] = {
+ .override = ene_override,
+ .save_state = ti_save_state,
+ .restore_state = ti_restore_state,
+ .sock_init = ti_init,
+ },
};
{
int i;
unsigned long val;
- u16 bridge_ctrl;
u32 mask;
- /* Set up ISA irq routing to probe the ISA irqs.. */
- bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
- if (!(bridge_ctrl & CB_BRIDGE_INTR)) {
- bridge_ctrl |= CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
- }
-
/*
* Probe for usable interrupts using the force
* register to generate bogus card status events.
mask = probe_irq_mask(val) & 0xffff;
- bridge_ctrl &= ~CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-
return mask;
}
/* probes the PCI interrupt, use only on override functions */
static int yenta_probe_cb_irq(struct yenta_socket *socket)
{
- u16 bridge_ctrl;
-
if (!socket->cb_irq)
return -1;
socket->probe_status = 0;
- /* disable ISA interrupts */
- bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
- bridge_ctrl &= ~CB_BRIDGE_INTR;
- config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-
if (request_irq(socket->cb_irq, yenta_probe_handler, SA_SHIRQ, "yenta", socket)) {
printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
return -1;
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS);
-
+
msleep(100);
/* disable interrupts */
{
u16 bridge;
struct pci_dev *dev = socket->dev;
+ struct pci_bus_region region;
- pci_set_power_state(socket->dev, 0);
+ pcibios_resource_to_bus(socket->dev, ®ion, &dev->resource[0]);
config_writel(socket, CB_LEGACY_MODE_BASE, 0);
- config_writel(socket, PCI_BASE_ADDRESS_0, dev->resource[0].start);
+ config_writel(socket, PCI_BASE_ADDRESS_0, region.start);
config_writew(socket, PCI_COMMAND,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
* - PCI interrupts enabled if a PCI interrupt exists..
*/
bridge = config_readw(socket, CB_BRIDGE_CONTROL);
- bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_INTR | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
- bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN | CB_BRIDGE_INTR;
+ bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
+ bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN;
config_writew(socket, CB_BRIDGE_CONTROL, bridge);
}
* Bail out if so.
*/
if (!dev->subordinate) {
- printk(KERN_ERROR "Yenta: no bus associated with %s!\n",
- pci_name(dev));
+ printk(KERN_ERR "Yenta: no bus associated with %s! "
+ "(try 'pci=assign-busses')\n", pci_name(dev));
return -ENODEV;
}
/* Register it with the pcmcia layer.. */
ret = pcmcia_register_socket(&socket->socket);
- if (ret == 0)
+ if (ret == 0) {
+ /* Add the yenta register attributes */
+ device_create_file(&dev->dev, &dev_attr_yenta_registers);
goto out;
+ }
unmap:
iounmap(socket->base);
CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250),
CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, TI12XX),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, TI12XX),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, TI1250),
- CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX21_XX11, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X515, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X420, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X620, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7410, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7510, TI12XX),
+ CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7610, TI12XX),
+
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_710, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_712, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_720, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_722, TI12XX),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE),
+ CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH),
projects / powerpc.git / blobdiff