Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

[powerpc.git] / drivers / scsi / Kconfig

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6f2c71e..a6676be 100644 (file)
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -172,12 +172,12 @@ config CHR_DEV_SCH
          don't need this for those tiny 6-slot cdrom changers.  Media
          changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
          If you have such hardware and want to use it with linux, say Y
-         here.  Check <file:Documentation/scsi-changer.txt> for details.
+         here.  Check <file:Documentation/scsi/scsi-changer.txt> for details.
        
          If you want to compile this as a module ( = code which can be
          inserted in and removed from the running kernel whenever you want),
          say M here and read <file:Documentation/kbuild/modules.txt> and
-         <file:Documentation/scsi.txt>. The module will be called ch.o.
+         <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
          If unsure, say N.
        
 
@@ -272,6 +272,13 @@ config SCSI_FC_ATTRS
          each attached FiberChannel device to sysfs, say Y.
          Otherwise, say N.
 
+config SCSI_FC_TGT_ATTRS
+       bool "SCSI target support for FiberChannel Transport Attributes"
+       depends on SCSI_FC_ATTRS
+       depends on SCSI_TGT = y || SCSI_TGT = SCSI_FC_ATTRS
+       help
+               If you want to use SCSI target mode drivers enable this option.
+
 config SCSI_ISCSI_ATTRS
        tristate "iSCSI Transport Attributes"
        depends on SCSI && NET
@@ -289,6 +296,20 @@ config SCSI_SAS_ATTRS
 
 source "drivers/scsi/libsas/Kconfig"
 
+config SCSI_SRP_ATTRS
+       tristate "SRP Transport Attributes"
+       depends on SCSI
+       help
+         If you wish to export transport-specific information about
+         each attached SRP device to sysfs, say Y.
+
+config SCSI_SRP_TGT_ATTRS
+       bool "SCSI target support for SRP Transport Attributes"
+       depends on SCSI_SRP_ATTRS
+       depends on SCSI_TGT = y || SCSI_TGT = SCSI_SRP_ATTRS
+       help
+               If you want to use SCSI target mode drivers enable this option.
+
 endmenu
 
 menuconfig SCSI_LOWLEVEL
@@ -500,9 +521,8 @@ config SCSI_DPT_I2O
 
 config SCSI_ADVANSYS
        tristate "AdvanSys SCSI support"
-       depends on SCSI
+       depends on SCSI && VIRT_TO_BUS
        depends on ISA || EISA || PCI
-       depends on BROKEN || X86_32
        help
          This is a driver for all SCSI host adapters manufactured by
          AdvanSys. It is documented in the kernel source in
@@ -524,19 +544,32 @@ config SCSI_IN2000
          module will be called in2000.
 
 config SCSI_ARCMSR
-       tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support"
+       tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
        depends on PCI && SCSI
        help
-         This driver supports all of ARECA's SATA RAID controller cards.
+         This driver supports all of ARECA's SATA/SAS RAID controller cards.
          This is an ARECA-maintained driver by Erich Chen.
-         If you have any problems, please mail to: < erich@areca.com.tw >
+         If you have any problems, please mail to: <erich@areca.com.tw>.
          Areca supports Linux RAID config tools.
-
-         < http://www.areca.com.tw >
+         Please link <http://www.areca.com.tw>
 
          To compile this driver as a module, choose M here: the
          module will be called arcmsr (modprobe arcmsr).
 
+config SCSI_ARCMSR_AER
+       bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
+       depends on SCSI_ARCMSR && PCIEAER
+       default n
+       help
+         The advanced error reporting(AER) capability is "NOT" provided by
+         ARC1200/1201/1202 SATA RAID controllers cards.
+         If your card is one of ARC1200/1201/1202, please use the default setting, n.
+         If your card is other models, you could pick it
+         on condition that the kernel version is greater than 2.6.19.
+         This function is maintained driver by Nick Cheng. If you have any
+         problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
+         To enable this function, choose Y here.
+
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 
 config SCSI_HPTIOP
@@ -692,7 +725,7 @@ config SCSI_FD_MCS
 
 config SCSI_GDTH
        tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
-       depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
+       depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API && PCI_LEGACY
        ---help---
          Formerly called GDT SCSI Disk Array Controller Support.
 
@@ -836,6 +869,7 @@ config SCSI_IPS
 config SCSI_IBMVSCSI
        tristate "IBM Virtual SCSI support"
        depends on PPC_PSERIES || PPC_ISERIES
+       select SCSI_SRP_ATTRS
        help
          This is the IBM POWER Virtual SCSI Client
 
@@ -844,7 +878,7 @@ config SCSI_IBMVSCSI
 
 config SCSI_IBMVSCSIS
        tristate "IBM Virtual SCSI Server support"
-       depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP
+       depends on PPC_PSERIES && SCSI_SRP && SCSI_SRP_TGT_ATTRS
        help
          This is the SRP target driver for IBM pSeries virtual environments.