[SCSI] aacraid: add parameter to control FUA and SYNCHRONIZE_CACHE policy

[powerpc.git] / drivers / scsi / aacraid / aachba.c

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index cef764e..43d6aff 100644 (file)
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -144,6 +144,7 @@ static char *aac_get_status_string(u32 status);
  */    
  
 static int nondasd = -1;
+static int aac_cache = 0;
 static int dacmode = -1;
 
 int aac_commit = -1;
@@ -152,6 +153,8 @@ int aif_timeout = 120;
 
 module_param(nondasd, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices. 0=off, 1=on");
+module_param_named(cache, aac_cache, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n\tbit 0 - Disable FUA in WRITE SCSI commands\n\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n\tbit 2 - Disable only if Battery not protecting Cache");
 module_param(dacmode, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on");
 module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR);
@@ -1013,7 +1016,8 @@ static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u
        writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
        writecmd->count = cpu_to_le32(count<<9);
        writecmd->cid = cpu_to_le16(scmd_id(cmd));
-       writecmd->flags = fua ?
+       writecmd->flags = (fua && ((aac_cache & 5) != 1) &&
+         (((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ?
                cpu_to_le16(IO_TYPE_WRITE|IO_SUREWRITE) :
                cpu_to_le16(IO_TYPE_WRITE);
        writecmd->bpTotal = 0;
@@ -1325,11 +1329,11 @@ int aac_get_adapter_info(struct aac_dev* dev)
                }
        }
 
+       dev->cache_protected = 0;
        dev->nondasd_support = 0;
        dev->raid_scsi_mode = 0;
-       if(dev->adapter_info.options & AAC_OPT_NONDASD){
+       if(dev->adapter_info.options & AAC_OPT_NONDASD)
                dev->nondasd_support = 1;
-       }
 
        /*
         * If the firmware supports ROMB RAID/SCSI mode and we are currently
@@ -1351,10 +1355,9 @@ int aac_get_adapter_info(struct aac_dev* dev)
                printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n",
                                dev->name, dev->id);
                
-       if(nondasd != -1) {  
+       if (nondasd != -1)
                dev->nondasd_support = (nondasd!=0);
-       }
-       if(dev->nondasd_support != 0){
+       if(dev->nondasd_support != 0) {
                printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
        }
 
@@ -2106,7 +2109,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                mode_buf[2] = 0;        /* Device-specific param,
                                           bit 8: 0/1 = write enabled/protected
                                           bit 4: 0/1 = FUA enabled */
-               if (dev->raw_io_interface)
+               if (dev->raw_io_interface && ((aac_cache & 5) != 1))
                        mode_buf[2] = 0x10;
                mode_buf[3] = 0;        /* Block descriptor length */
                if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
@@ -2114,7 +2117,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                        mode_buf[0] = 6;
                        mode_buf[4] = 8;
                        mode_buf[5] = 1;
-                       mode_buf[6] = 0x04; /* WCE */
+                       mode_buf[6] = ((aac_cache & 6) == 2)
+                               ? 0 : 0x04; /* WCE */
                        mode_buf_length = 7;
                        if (mode_buf_length > scsicmd->cmnd[4])
                                mode_buf_length = scsicmd->cmnd[4];
@@ -2137,7 +2141,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                mode_buf[3] = 0;        /* Device-specific param,
                                           bit 8: 0/1 = write enabled/protected
                                           bit 4: 0/1 = FUA enabled */
-               if (dev->raw_io_interface)
+               if (dev->raw_io_interface && ((aac_cache & 5) != 1))
                        mode_buf[3] = 0x10;
                mode_buf[4] = 0;        /* reserved */
                mode_buf[5] = 0;        /* reserved */
@@ -2148,7 +2152,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                        mode_buf[1] = 9;
                        mode_buf[8] = 8;
                        mode_buf[9] = 1;
-                       mode_buf[10] = 0x04; /* WCE */
+                       mode_buf[10] = ((aac_cache & 6) == 2)
+                               ? 0 : 0x04; /* WCE */
                        mode_buf_length = 11;
                        if (mode_buf_length > scsicmd->cmnd[8])
                                mode_buf_length = scsicmd->cmnd[8];
@@ -2224,9 +2229,16 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                        return aac_write(scsicmd);
 
                case SYNCHRONIZE_CACHE:
+                       if (((aac_cache & 6) == 6) && dev->cache_protected) {
+                               scsicmd->result = DID_OK << 16 |
+                                       COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+                               scsicmd->scsi_done(scsicmd);
+                               return 0;
+                       }
                        /* Issue FIB to tell Firmware to flush it's cache */
-                       return aac_synchronize(scsicmd);
-                       
+                       if ((aac_cache & 6) != 2)
+                               return aac_synchronize(scsicmd);
+                       /* FALLTHRU */
                default:
                        /*
                         *      Unhandled commands