[SCSI] qla2xxx: Correct 'loop-down' determination logic in qla2x00_fw_ready().
[powerpc.git] / drivers / scsi / qla2xxx / qla_attr.c
index 78eec67..87f90c4 100644 (file)
@@ -294,9 +294,6 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj, char *buf, loff_t off,
        if (!capable(CAP_SYS_ADMIN) || off != 0)
                return 0;
 
-       if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
-               return -ENOTSUPP;
-
        /* Read NVRAM. */
        spin_lock_irqsave(&ha->hardware_lock, flags);
        ha->isp_ops.read_nvram(ha, (uint8_t *)buf, ha->vpd_base, ha->vpd_size);
@@ -316,9 +313,6 @@ qla2x00_sysfs_write_vpd(struct kobject *kobj, char *buf, loff_t off,
        if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size)
                return 0;
 
-       if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
-               return -ENOTSUPP;
-
        /* Write NVRAM. */
        spin_lock_irqsave(&ha->hardware_lock, flags);
        ha->isp_ops.write_nvram(ha, (uint8_t *)buf, ha->vpd_base, count);
@@ -338,6 +332,53 @@ static struct bin_attribute sysfs_vpd_attr = {
        .write = qla2x00_sysfs_write_vpd,
 };
 
+static ssize_t
+qla2x00_sysfs_read_sfp(struct kobject *kobj, char *buf, loff_t off,
+    size_t count)
+{
+       struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
+           struct device, kobj)));
+       uint16_t iter, addr, offset;
+       int rval;
+
+       if (!capable(CAP_SYS_ADMIN) || off != 0 || count != SFP_DEV_SIZE * 2)
+               return 0;
+
+       addr = 0xa0;
+       for (iter = 0, offset = 0; iter < (SFP_DEV_SIZE * 2) / SFP_BLOCK_SIZE;
+           iter++, offset += SFP_BLOCK_SIZE) {
+               if (iter == 4) {
+                       /* Skip to next device address. */
+                       addr = 0xa2;
+                       offset = 0;
+               }
+
+               rval = qla2x00_read_sfp(ha, ha->sfp_data_dma, addr, offset,
+                   SFP_BLOCK_SIZE);
+               if (rval != QLA_SUCCESS) {
+                       qla_printk(KERN_WARNING, ha,
+                           "Unable to read SFP data (%x/%x/%x).\n", rval,
+                           addr, offset);
+                       count = 0;
+                       break;
+               }
+               memcpy(buf, ha->sfp_data, SFP_BLOCK_SIZE);
+               buf += SFP_BLOCK_SIZE;
+       }
+
+       return count;
+}
+
+static struct bin_attribute sysfs_sfp_attr = {
+       .attr = {
+               .name = "sfp",
+               .mode = S_IRUSR | S_IWUSR,
+               .owner = THIS_MODULE,
+       },
+       .size = SFP_DEV_SIZE * 2,
+       .read = qla2x00_sysfs_read_sfp,
+};
+
 void
 qla2x00_alloc_sysfs_attr(scsi_qla_host_t *ha)
 {
@@ -348,7 +389,12 @@ qla2x00_alloc_sysfs_attr(scsi_qla_host_t *ha)
        sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr);
        sysfs_create_bin_file(&host->shost_gendev.kobj,
            &sysfs_optrom_ctl_attr);
-       sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_vpd_attr);
+       if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
+               sysfs_create_bin_file(&host->shost_gendev.kobj,
+                   &sysfs_vpd_attr);
+               sysfs_create_bin_file(&host->shost_gendev.kobj,
+                   &sysfs_sfp_attr);
+       }
 }
 
 void
@@ -361,7 +407,12 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t *ha)
        sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr);
        sysfs_remove_bin_file(&host->shost_gendev.kobj,
            &sysfs_optrom_ctl_attr);
-       sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_vpd_attr);
+       if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
+               sysfs_remove_bin_file(&host->shost_gendev.kobj,
+                   &sysfs_vpd_attr);
+               sysfs_remove_bin_file(&host->shost_gendev.kobj,
+                   &sysfs_sfp_attr);
+       }
 
        if (ha->beacon_blink_led == 1)
                ha->isp_ops.beacon_off(ha);