[PATCH] fix b2c2 dvb undefined symbol

[powerpc.git] / drivers / scsi / sata_svw.c

diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index d89d968..57e5a9d 100644 (file)
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -44,7 +44,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include "scsi.h"
+#include <linux/device.h>
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
 
@@ -84,6 +84,8 @@
 /* Port stride */
 #define K2_SATA_PORT_OFFSET            0x100
 
+static u8 k2_stat_check_status(struct ata_port *ap);
+
 
 static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {
@@ -102,7 +104,7 @@ static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
 }
 
 
-static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
        struct ata_ioports *ioaddr = &ap->ioaddr;
        unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -136,16 +138,24 @@ static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
 static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 {
        struct ata_ioports *ioaddr = &ap->ioaddr;
-       u16 nsect, lbal, lbam, lbah;
+       u16 nsect, lbal, lbam, lbah, feature;
 
-       nsect = tf->nsect = readw(ioaddr->nsect_addr);
-       lbal = tf->lbal = readw(ioaddr->lbal_addr);
-       lbam = tf->lbam = readw(ioaddr->lbam_addr);
-       lbah = tf->lbah = readw(ioaddr->lbah_addr);
+       tf->command = k2_stat_check_status(ap);
        tf->device = readw(ioaddr->device_addr);
+       feature = readw(ioaddr->error_addr);
+       nsect = readw(ioaddr->nsect_addr);
+       lbal = readw(ioaddr->lbal_addr);
+       lbam = readw(ioaddr->lbam_addr);
+       lbah = readw(ioaddr->lbah_addr);
+
+       tf->feature = feature;
+       tf->nsect = nsect;
+       tf->lbal = lbal;
+       tf->lbam = lbam;
+       tf->lbah = lbah;
 
        if (tf->flags & ATA_TFLAG_LBA48) {
-               tf->hob_feature = readw(ioaddr->error_addr) >> 8;
+               tf->hob_feature = feature >> 8;
                tf->hob_nsect = nsect >> 8;
                tf->hob_lbal = lbal >> 8;
                tf->hob_lbam = lbam >> 8;
@@ -273,7 +283,7 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start,
 #endif /* CONFIG_PPC_OF */
 
 
-static Scsi_Host_Template k2_sata_sht = {
+static struct scsi_host_template k2_sata_sht = {
        .module                 = THIS_MODULE,
        .name                   = DRV_NAME,
        .ioctl                  = ata_scsi_ioctl,
@@ -297,7 +307,7 @@ static Scsi_Host_Template k2_sata_sht = {
 };
 
 
-static struct ata_port_operations k2_sata_ops = {
+static const struct ata_port_operations k2_sata_ops = {
        .port_disable           = ata_port_disable,
        .tf_load                = k2_sata_tf_load,
        .tf_read                = k2_sata_tf_read,
@@ -352,7 +362,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
        int i;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        /*
         * If this driver happens to only be useful on Apple's K2, then
@@ -456,7 +466,7 @@ err_out:
  * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA
  * controller
  * */
-static struct pci_device_id k2_sata_pci_tbl[] = {
+static const struct pci_device_id k2_sata_pci_tbl[] = {
        { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
        { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
        { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },