Merge acpi-2.6.12 to-akpm

[powerpc.git] / drivers / scsi / sata_svw.c

diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 8d1a5d2..858e071 100644 (file)
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -49,7 +49,7 @@
 #endif /* CONFIG_PPC_OF */
 
 #define DRV_NAME       "sata_svw"
-#define DRV_VERSION    "1.05"
+#define DRV_VERSION    "1.06"
 
 /* Taskfile registers offsets */
 #define K2_SATA_TF_CMD_OFFSET          0x00
@@ -313,6 +313,7 @@ static struct ata_port_operations k2_sata_ops = {
        .scr_write              = k2_sata_scr_write,
        .port_start             = ata_port_start,
        .port_stop              = ata_port_stop,
+       .host_stop              = ata_host_stop,
 };
 
 static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
@@ -343,6 +344,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
        void *mmio_base;
        int pci_dev_busy = 0;
        int rc;
+       int i;
 
        if (!printed_version++)
                printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
@@ -395,7 +397,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 
        /* Clear a magic bit in SCR1 according to Darwin, those help
         * some funky seagate drives (though so far, those were already
-        * set by the firmware on the machines I had access to
+        * set by the firmware on the machines I had access to)
         */
        writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
               mmio_base + K2_SATA_SICR1_OFFSET);
@@ -420,11 +422,11 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
        probe_ent->mwdma_mask = 0x7;
        probe_ent->udma_mask = 0x7f;
 
-       /* We have 4 ports per PCI function */
-       k2_sata_setup_port(&probe_ent->port[0], base + 0 * K2_SATA_PORT_OFFSET);
-       k2_sata_setup_port(&probe_ent->port[1], base + 1 * K2_SATA_PORT_OFFSET);
-       k2_sata_setup_port(&probe_ent->port[2], base + 2 * K2_SATA_PORT_OFFSET);
-       k2_sata_setup_port(&probe_ent->port[3], base + 3 * K2_SATA_PORT_OFFSET);
+       /* different controllers have different number of ports - currently 4 or 8 */
+       /* All ports are on the same function. Multi-function device is no
+        * longer available. This should not be seen in any system. */
+       for (i = 0; i < ent->driver_data; i++)
+               k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET);
 
        pci_set_master(pdev);
 
@@ -444,11 +446,17 @@ err_out:
        return rc;
 }
 
-
+/* 0x240 is device ID for Apple K2 device
+ * 0x241 is device ID for Serverworks Frodo4
+ * 0x242 is device ID for Serverworks Frodo8
+ * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA
+ * controller
+ * */
 static struct pci_device_id k2_sata_pci_tbl[] = {
-       { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-       { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-       { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+       { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
+       { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
+       { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+       { 0x1166, 0x024a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
        { }
 };