#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/types.h>
#include "scsi_logging.h"
#include "scsi_debug.h"
-#define SCSI_DEBUG_VERSION "1.80"
-static const char * scsi_debug_version_date = "20060914";
+#define SCSI_DEBUG_VERSION "1.81"
+static const char * scsi_debug_version_date = "20070104";
-/* Additional Sense Code (ASC) used */
+/* Additional Sense Code (ASC) */
#define NO_ADDITIONAL_SENSE 0x0
#define LOGICAL_UNIT_NOT_READY 0x4
#define UNRECOVERED_READ_ERR 0x11
#define INVALID_FIELD_IN_PARAM_LIST 0x26
#define POWERON_RESET 0x29
#define SAVING_PARAMS_UNSUP 0x39
+#define TRANSPORT_PROBLEM 0x4b
#define THRESHOLD_EXCEEDED 0x5d
#define LOW_POWER_COND_ON 0x5e
+/* Additional Sense Code Qualifier (ASCQ) */
+#define ACK_NAK_TO 0x3
+
#define SDEBUG_TAGGED_QUEUING 0 /* 0 | MSG_SIMPLE_TAG | MSG_ORDERED_TAG */
/* Default values for driver parameters */
#define SCSI_DEBUG_OPT_MEDIUM_ERR 2
#define SCSI_DEBUG_OPT_TIMEOUT 4
#define SCSI_DEBUG_OPT_RECOVERED_ERR 8
+#define SCSI_DEBUG_OPT_TRANSPORT_ERR 16
/* When "every_nth" > 0 then modulo "every_nth" commands:
* - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
* - a RECOVERED_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
+ * - a TRANSPORT_ERROR is simulated on successful read and write
+ * commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
*
* When "every_nth" < 0 then after "- every_nth" commands:
* - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
* - a RECOVERED_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
+ * - a TRANSPORT_ERROR is simulated on successful read and write
+ * commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
* This will continue until some other action occurs (e.g. the user
* writing a new value (other than -1 or 1) to every_nth via sysfs).
*/
struct sdebug_dev_info * devip);
static int resp_start_stop(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip);
+static int resp_report_tgtpgs(struct scsi_cmnd * scp,
+ struct sdebug_dev_info * devip);
static int resp_readcap(struct scsi_cmnd * SCpnt,
struct sdebug_dev_info * devip);
static int resp_readcap16(struct scsi_cmnd * SCpnt,
static void __init init_all_queued(void);
static void stop_all_queued(void);
static int stop_queued_cmnd(struct scsi_cmnd * cmnd);
-static int inquiry_evpd_83(unsigned char * arr, int target_dev_id,
- int dev_id_num, const char * dev_id_str,
- int dev_id_str_len);
+static int inquiry_evpd_83(unsigned char * arr, int port_group_id,
+ int target_dev_id, int dev_id_num,
+ const char * dev_id_str, int dev_id_str_len);
static int inquiry_evpd_88(unsigned char * arr, int target_dev_id);
static int do_create_driverfs_files(void);
static void do_remove_driverfs_files(void);
int target = SCpnt->device->id;
struct sdebug_dev_info * devip = NULL;
int inj_recovered = 0;
+ int inj_transport = 0;
int delay_override = 0;
if (done == NULL)
return 0; /* ignore command causing timeout */
else if (SCSI_DEBUG_OPT_RECOVERED_ERR & scsi_debug_opts)
inj_recovered = 1; /* to reads and writes below */
+ else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & scsi_debug_opts)
+ inj_transport = 1; /* to reads and writes below */
}
if (devip->wlun) {
}
errsts = resp_readcap16(SCpnt, devip);
break;
+ case MAINTENANCE_IN:
+ if (MI_REPORT_TARGET_PGS != cmd[1]) {
+ mk_sense_buffer(devip, ILLEGAL_REQUEST,
+ INVALID_OPCODE, 0);
+ errsts = check_condition_result;
+ break;
+ }
+ errsts = resp_report_tgtpgs(SCpnt, devip);
+ break;
case READ_16:
case READ_12:
case READ_10:
mk_sense_buffer(devip, RECOVERED_ERROR,
THRESHOLD_EXCEEDED, 0);
errsts = check_condition_result;
- }
+ } else if (inj_transport && (0 == errsts)) {
+ mk_sense_buffer(devip, ABORTED_COMMAND,
+ TRANSPORT_PROBLEM, ACK_NAK_TO);
+ errsts = check_condition_result;
+ }
break;
case REPORT_LUNS: /* mandatory, ignore unit attention */
delay_override = 1;
delay_override = 1;
errsts = check_readiness(SCpnt, 0, devip);
break;
+ case WRITE_BUFFER:
+ errsts = check_readiness(SCpnt, 1, devip);
+ break;
default:
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: Opcode: 0x%x not "
static const char * inq_product_id = "scsi_debug ";
static const char * inq_product_rev = "0004";
-static int inquiry_evpd_83(unsigned char * arr, int target_dev_id,
- int dev_id_num, const char * dev_id_str,
+static int inquiry_evpd_83(unsigned char * arr, int port_group_id,
+ int target_dev_id, int dev_id_num,
+ const char * dev_id_str,
int dev_id_str_len)
{
int num, port_a;
arr[num++] = (port_a >> 16) & 0xff;
arr[num++] = (port_a >> 8) & 0xff;
arr[num++] = port_a & 0xff;
+ /* NAA-5, Target port group identifier */
+ arr[num++] = 0x61; /* proto=sas, binary */
+ arr[num++] = 0x95; /* piv=1, target port group id */
+ arr[num++] = 0x0;
+ arr[num++] = 0x4;
+ arr[num++] = 0;
+ arr[num++] = 0;
+ arr[num++] = (port_group_id >> 8) & 0xff;
+ arr[num++] = port_group_id & 0xff;
/* NAA-5, Target device identifier */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0xa3; /* piv=1, target device, naa */
struct sdebug_dev_info * devip)
{
unsigned char pq_pdt;
- unsigned char arr[SDEBUG_MAX_INQ_ARR_SZ];
+ unsigned char * arr;
unsigned char *cmd = (unsigned char *)scp->cmnd;
- int alloc_len, n;
+ int alloc_len, n, ret;
alloc_len = (cmd[3] << 8) + cmd[4];
- memset(arr, 0, SDEBUG_MAX_INQ_ARR_SZ);
+ arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_ATOMIC);
+ if (! arr)
+ return DID_REQUEUE << 16;
if (devip->wlun)
pq_pdt = 0x1e; /* present, wlun */
else if (scsi_debug_no_lun_0 && (0 == devip->lun))
if (0x2 & cmd[1]) { /* CMDDT bit set */
mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
0);
+ kfree(arr);
return check_condition_result;
} else if (0x1 & cmd[1]) { /* EVPD bit set */
- int lu_id_num, target_dev_id, len;
+ int lu_id_num, port_group_id, target_dev_id, len;
char lu_id_str[6];
int host_no = devip->sdbg_host->shost->host_no;
+ port_group_id = (((host_no + 1) & 0x7f) << 8) +
+ (devip->channel & 0x7f);
if (0 == scsi_debug_vpd_use_hostno)
host_no = 0;
lu_id_num = devip->wlun ? -1 : (((host_no + 1) * 2000) +
memcpy(&arr[4], lu_id_str, len);
} else if (0x83 == cmd[2]) { /* device identification */
arr[1] = cmd[2]; /*sanity */
- arr[3] = inquiry_evpd_83(&arr[4], target_dev_id,
- lu_id_num, lu_id_str, len);
+ arr[3] = inquiry_evpd_83(&arr[4], port_group_id,
+ target_dev_id, lu_id_num,
+ lu_id_str, len);
} else if (0x84 == cmd[2]) { /* Software interface ident. */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_84(&arr[4]);
/* Illegal request, invalid field in cdb */
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
+ kfree(arr);
return check_condition_result;
}
len = min(((arr[2] << 8) + arr[3]) + 4, alloc_len);
- return fill_from_dev_buffer(scp, arr,
+ ret = fill_from_dev_buffer(scp, arr,
min(len, SDEBUG_MAX_INQ_ARR_SZ));
+ kfree(arr);
+ return ret;
}
/* drops through here for a standard inquiry */
arr[1] = DEV_REMOVEABLE(target) ? 0x80 : 0; /* Removable disk */
arr[2] = scsi_debug_scsi_level;
arr[3] = 2; /* response_data_format==2 */
arr[4] = SDEBUG_LONG_INQ_SZ - 5;
+ if (0 == scsi_debug_vpd_use_hostno)
+ arr[5] = 0x10; /* claim: implicit TGPS */
arr[6] = 0x10; /* claim: MultiP */
/* arr[6] |= 0x40; ... claim: EncServ (enclosure services) */
arr[7] = 0xa; /* claim: LINKED + CMDQUE */
arr[n++] = 0x3; arr[n++] = 0x60; /* SSC-2 no version */
}
arr[n++] = 0xc; arr[n++] = 0xf; /* SAS-1.1 rev 10 */
- return fill_from_dev_buffer(scp, arr,
+ ret = fill_from_dev_buffer(scp, arr,
min(alloc_len, SDEBUG_LONG_INQ_SZ));
+ kfree(arr);
+ return ret;
}
static int resp_requests(struct scsi_cmnd * scp,
min(alloc_len, SDEBUG_READCAP16_ARR_SZ));
}
+#define SDEBUG_MAX_TGTPGS_ARR_SZ 1412
+
+static int resp_report_tgtpgs(struct scsi_cmnd * scp,
+ struct sdebug_dev_info * devip)
+{
+ unsigned char *cmd = (unsigned char *)scp->cmnd;
+ unsigned char * arr;
+ int host_no = devip->sdbg_host->shost->host_no;
+ int n, ret, alen, rlen;
+ int port_group_a, port_group_b, port_a, port_b;
+
+ alen = ((cmd[6] << 24) + (cmd[7] << 16) + (cmd[8] << 8)
+ + cmd[9]);
+
+ arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_ATOMIC);
+ if (! arr)
+ return DID_REQUEUE << 16;
+ /*
+ * EVPD page 0x88 states we have two ports, one
+ * real and a fake port with no device connected.
+ * So we create two port groups with one port each
+ * and set the group with port B to unavailable.
+ */
+ port_a = 0x1; /* relative port A */
+ port_b = 0x2; /* relative port B */
+ port_group_a = (((host_no + 1) & 0x7f) << 8) +
+ (devip->channel & 0x7f);
+ port_group_b = (((host_no + 1) & 0x7f) << 8) +
+ (devip->channel & 0x7f) + 0x80;
+
+ /*
+ * The asymmetric access state is cycled according to the host_id.
+ */
+ n = 4;
+ if (0 == scsi_debug_vpd_use_hostno) {
+ arr[n++] = host_no % 3; /* Asymm access state */
+ arr[n++] = 0x0F; /* claim: all states are supported */
+ } else {
+ arr[n++] = 0x0; /* Active/Optimized path */
+ arr[n++] = 0x01; /* claim: only support active/optimized paths */
+ }
+ arr[n++] = (port_group_a >> 8) & 0xff;
+ arr[n++] = port_group_a & 0xff;
+ arr[n++] = 0; /* Reserved */
+ arr[n++] = 0; /* Status code */
+ arr[n++] = 0; /* Vendor unique */
+ arr[n++] = 0x1; /* One port per group */
+ arr[n++] = 0; /* Reserved */
+ arr[n++] = 0; /* Reserved */
+ arr[n++] = (port_a >> 8) & 0xff;
+ arr[n++] = port_a & 0xff;
+ arr[n++] = 3; /* Port unavailable */
+ arr[n++] = 0x08; /* claim: only unavailalbe paths are supported */
+ arr[n++] = (port_group_b >> 8) & 0xff;
+ arr[n++] = port_group_b & 0xff;
+ arr[n++] = 0; /* Reserved */
+ arr[n++] = 0; /* Status code */
+ arr[n++] = 0; /* Vendor unique */
+ arr[n++] = 0x1; /* One port per group */
+ arr[n++] = 0; /* Reserved */
+ arr[n++] = 0; /* Reserved */
+ arr[n++] = (port_b >> 8) & 0xff;
+ arr[n++] = port_b & 0xff;
+
+ rlen = n - 4;
+ arr[0] = (rlen >> 24) & 0xff;
+ arr[1] = (rlen >> 16) & 0xff;
+ arr[2] = (rlen >> 8) & 0xff;
+ arr[3] = rlen & 0xff;
+
+ /*
+ * Return the smallest value of either
+ * - The allocated length
+ * - The constructed command length
+ * - The maximum array size
+ */
+ rlen = min(alen,n);
+ ret = fill_from_dev_buffer(scp, arr,
+ min(rlen, SDEBUG_MAX_TGTPGS_ARR_SZ));
+ kfree(arr);
+ return ret;
+}
+
/* <<Following mode page info copied from ST318451LW>> */
static int resp_err_recov_pg(unsigned char * p, int pcontrol, int target)
if (sdp->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN)
sdp->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN;
devip = devInfoReg(sdp);
+ if (NULL == devip)
+ return 1; /* no resources, will be marked offline */
sdp->hostdata = devip;
if (sdp->host->cmd_per_lun)
scsi_adjust_queue_depth(sdp, SDEBUG_TAGGED_QUEUING,
}
}
if (NULL == open_devip) { /* try and make a new one */
- open_devip = kzalloc(sizeof(*open_devip),GFP_KERNEL);
+ open_devip = kzalloc(sizeof(*open_devip),GFP_ATOMIC);
if (NULL == open_devip) {
printk(KERN_ERR "%s: out of memory at line %d\n",
__FUNCTION__, __LINE__);
MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)");
MODULE_PARM_DESC(num_parts, "number of partitions(def=0)");
MODULE_PARM_DESC(num_tgts, "number of targets per host to simulate(def=1)");
-MODULE_PARM_DESC(opts, "1->noise, 2->medium_error, 4->... (def=0)");
+MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)");
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])");
MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)");
struct list_head *lh, *lh_sf;
sdbg_host = kzalloc(sizeof(*sdbg_host),GFP_KERNEL);
-
if (NULL == sdbg_host) {
printk(KERN_ERR "%s: out of memory at line %d\n",
__FUNCTION__, __LINE__);
projects / powerpc.git / blobdiff