#define RS_ISR_PASS_LIMIT 256
-#define _INLINE_ inline
-
static void change_speed(struct m68k_serial *info);
/*
static int m68328_console_cbaud = DEFAULT_CBAUD;
-/*
- * tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the memcpy_fromfs blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char tmp_buf[SERIAL_XMIT_SIZE]; /* This is cheating */
-
static inline int serial_paranoia_check(struct m68k_serial *info,
char *name, const char *routine)
{
if (serial_paranoia_check(info, tty->name, "rs_stop"))
return;
- save_flags(flags); cli();
+ local_irq_save(flags);
uart->ustcnt &= ~USTCNT_TXEN;
- restore_flags(flags);
+ local_irq_restore(flags);
}
static void rs_put_char(char ch)
{
int flags, loops = 0;
- save_flags(flags); cli();
+ local_irq_save(flags);
while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) {
loops++;
UTX_TXDATA = ch;
udelay(5);
- restore_flags(flags);
+ local_irq_restore(flags);
}
static void rs_start(struct tty_struct *tty)
if (serial_paranoia_check(info, tty->name, "rs_start"))
return;
- save_flags(flags); cli();
+ local_irq_save(flags);
if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) {
#ifdef USE_INTS
uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
uart->ustcnt |= USTCNT_TXEN;
#endif
}
- restore_flags(flags);
+ local_irq_restore(flags);
}
/* Drop into either the boot monitor or kadb upon receiving a break
/* Drop into the debugger */
}
-static _INLINE_ void status_handle(struct m68k_serial *info, unsigned short status)
+static void status_handle(struct m68k_serial *info, unsigned short status)
{
#if 0
if(status & DCD) {
return;
}
-static _INLINE_ void receive_chars(struct m68k_serial *info, struct pt_regs *regs, unsigned short rx)
+static void receive_chars(struct m68k_serial *info, struct pt_regs *regs,
+ unsigned short rx)
{
struct tty_struct *tty = info->tty;
m68328_uart *uart = &uart_addr[info->line];
if(!tty)
goto clear_and_exit;
- /*
- * Make sure that we do not overflow the buffer
- */
- if (tty_request_buffer_room(tty, 1) == 0) {
- schedule_work(&tty->flip.work);
- return;
- }
-
flag = TTY_NORMAL;
if(rx & URX_PARITY_ERROR) {
} while((rx = uart->urx.w) & URX_DATA_READY);
#endif
- schedule_work(&tty->flip.work);
+ tty_schedule_flip(tty);
clear_and_exit:
return;
}
-static _INLINE_ void transmit_chars(struct m68k_serial *info)
+static void transmit_chars(struct m68k_serial *info)
{
m68328_uart *uart = &uart_addr[info->line];
return -ENOMEM;
}
- save_flags(flags); cli();
+ local_irq_save(flags);
/*
* Clear the FIFO buffers and disable them
change_speed(info);
info->flags |= S_INITIALIZED;
- restore_flags(flags);
+ local_irq_restore(flags);
return 0;
}
if (!(info->flags & S_INITIALIZED))
return;
- save_flags(flags); cli(); /* Disable interrupts */
+ local_irq_save(flags);
if (info->xmit_buf) {
free_page((unsigned long) info->xmit_buf);
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~S_INITIALIZED;
- restore_flags(flags);
+ local_irq_restore(flags);
}
struct {
if (info == 0) return;
if (info->xmit_buf == 0) return;
- save_flags(flags); cli();
+ local_irq_save(flags);
left = info->xmit_cnt;
while (left != 0) {
c = info->xmit_buf[info->xmit_tail];
info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt--;
- restore_flags(flags);
+ local_irq_restore(flags);
rs_put_char(c);
- save_flags(flags); cli();
+ local_irq_save(flags);
left = min(info->xmit_cnt, left-1);
}
/* Last character is being transmitted now (hopefully). */
udelay(5);
- restore_flags(flags);
+ local_irq_restore(flags);
return;
}
#endif
/* Enable transmitter */
- save_flags(flags); cli();
+ local_irq_save(flags);
if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
!info->xmit_buf) {
- restore_flags(flags);
+ local_irq_restore(flags);
return;
}
while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
}
#endif
- restore_flags(flags);
+ local_irq_restore(flags);
}
extern void console_printn(const char * b, int count);
if (!tty || !info->xmit_buf)
return 0;
- save_flags(flags);
+ local_save_flags(flags);
while (1) {
- cli();
+ local_irq_disable();
c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
+ local_irq_restore(flags);
+
if (c <= 0)
break;
memcpy(info->xmit_buf + info->xmit_head, buf, c);
+
+ local_irq_disable();
info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt += c;
- restore_flags(flags);
+ local_irq_restore(flags);
buf += c;
count -= c;
total += c;
if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
/* Enable transmitter */
- cli();
+ local_irq_disable();
#ifndef USE_INTS
while(info->xmit_cnt) {
#endif
#ifndef USE_INTS
}
#endif
- restore_flags(flags);
+ local_irq_restore(flags);
}
- restore_flags(flags);
+
return total;
}
static void rs_flush_buffer(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+ unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
return;
- cli();
+ local_irq_save(flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- sti();
+ local_irq_restore(flags);
tty_wakeup(tty);
}
m68328_uart *uart = &uart_addr[info->line];
#endif
unsigned char status;
+ unsigned long flags;
- cli();
+ local_irq_save(flags);
#ifdef CONFIG_SERIAL_68328_RTS_CTS
status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0;
#else
status = 0;
#endif
- sti();
+ local_irq_restore(flags);
put_user(status,value);
return 0;
}
unsigned long flags;
if (!info->port)
return;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
#ifdef USE_INTS
uart->utx.w |= UTX_SEND_BREAK;
msleep_interruptible(duration);
uart->utx.w &= ~UTX_SEND_BREAK;
#endif
- restore_flags(flags);
+ local_irq_restore(flags);
}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
(struct serial_struct *) arg);
case TIOCSERGETLSR: /* Get line status register */
if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(unsigned int));
+ sizeof(unsigned int)))
return get_lsr_info(info, (unsigned int *) arg);
return -EFAULT;
case TIOCSERGSTRUCT:
if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
return;
- save_flags(flags); cli();
+ local_irq_save(flags);
if (tty_hung_up_p(filp)) {
- restore_flags(flags);
+ local_irq_restore(flags);
return;
}
info->count = 0;
}
if (info->count) {
- restore_flags(flags);
+ local_irq_restore(flags);
return;
}
info->flags |= S_CLOSING;
}
info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING);
wake_up_interruptible(&info->close_wait);
- restore_flags(flags);
+ local_irq_restore(flags);
}
/*
info->count--;
info->blocked_open++;
while (1) {
- cli();
+ local_irq_disable();
m68k_rtsdtr(info, 1);
- sti();
+ local_irq_enable();
current->state = TASK_INTERRUPTIBLE;
if (tty_hung_up_p(filp) ||
!(info->flags & S_INITIALIZED)) {
return -ENOMEM;
}
- save_flags(flags); cli();
+ local_irq_save(flags);
for(i=0;i<NR_PORTS;i++) {
serial_pm[i]->data = info;
#endif
}
- restore_flags(flags);
+ local_irq_restore(flags);
return 0;
}
projects / powerpc.git / blobdiff