Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/scjody...

[powerpc.git] / drivers / serial / 8250_pci.c

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 0e21f58..5c3c039 100644 (file)
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -152,6 +152,7 @@ static int __devinit pci_hp_diva_init(struct pci_dev *dev)
                rc = 4;
                break;
        case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
+       case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
                rc = 1;
                break;
        }
@@ -226,8 +227,10 @@ static int __devinit pci_plx9050_init(struct pci_dev *dev)
        }
 
        irq_config = 0x41;
-       if (dev->vendor == PCI_VENDOR_ID_PANACOM)
+       if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
+           dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) {
                irq_config = 0x43;
+       }
        if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
            (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
                /*
@@ -661,6 +664,15 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
        /*
         * PLX
         */
+       {
+               .vendor         = PCI_VENDOR_ID_PLX,
+               .device         = PCI_DEVICE_ID_PLX_9050,
+               .subvendor      = PCI_SUBVENDOR_ID_EXSYS,
+               .subdevice      = PCI_SUBDEVICE_ID_EXSYS_4055,
+               .init           = pci_plx9050_init,
+               .setup          = pci_default_setup,
+               .exit           = __devexit_p(pci_plx9050_exit),
+       },
        {
                .vendor         = PCI_VENDOR_ID_PLX,
                .device         = PCI_DEVICE_ID_PLX_9050,
@@ -927,6 +939,7 @@ enum pci_board_num_t {
        pbn_panacom,
        pbn_panacom2,
        pbn_panacom4,
+       pbn_exsys_4055,
        pbn_plx_romulus,
        pbn_oxsemi,
        pbn_intel_i960,
@@ -1292,6 +1305,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
                .reg_shift      = 7,
        },
 
+       [pbn_exsys_4055] = {
+               .flags          = FL_BASE2,
+               .num_ports      = 4,
+               .base_baud      = 115200,
+               .uart_offset    = 8,
+       },
+
        /* I think this entry is broken - the first_offset looks wrong --rmk */
        [pbn_plx_romulus] = {
                .flags          = FL_BASE2,
@@ -1853,6 +1873,10 @@ static struct pci_device_id serial_pci_tbl[] = {
                PCI_SUBVENDOR_ID_CHASE_PCIRAS,
                PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, 
                pbn_b2_8_460800 },
+       {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+               PCI_SUBVENDOR_ID_EXSYS,
+               PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
+               pbn_exsys_4055 },
        /*
         * Megawolf Romulus PCI Serial Card, from Mike Hudson
         * (Exoray@isys.ca)