[PATCH] kill _INLINE_

[powerpc.git] / drivers / serial / imx.c

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 587cc6a..c3b7a66 100644 (file)
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -402,10 +402,10 @@ static int imx_startup(struct uart_port *port)
                             DRIVER_NAME, sport);
        if (retval) goto error_out2;
 
-       retval = request_irq(sport->rtsirq, imx_rtsint, 0,
+       retval = request_irq(sport->rtsirq, imx_rtsint,
+                            SA_TRIGGER_FALLING | SA_TRIGGER_RISING,
                             DRIVER_NAME, sport);
        if (retval) goto error_out3;
-       set_irq_type(sport->rtsirq, IRQT_BOTHEDGE);
 
        /*
         * Finally, clear and enable interrupts
@@ -668,13 +668,13 @@ static struct imx_port imx_ports[] = {
        .rtsirq = UART1_MINT_RTS,
        .port   = {
                .type           = PORT_IMX,
-               .iotype         = SERIAL_IO_MEM,
+               .iotype         = UPIO_MEM,
                .membase        = (void *)IMX_UART1_BASE,
                .mapbase        = IMX_UART1_BASE, /* FIXME */
                .irq            = UART1_MINT_RX,
                .uartclk        = 16000000,
                .fifosize       = 8,
-               .flags          = ASYNC_BOOT_AUTOCONF,
+               .flags          = UPF_BOOT_AUTOCONF,
                .ops            = &imx_pops,
                .line           = 0,
        },
@@ -684,13 +684,13 @@ static struct imx_port imx_ports[] = {
        .rtsirq = UART2_MINT_RTS,
        .port   = {
                .type           = PORT_IMX,
-               .iotype         = SERIAL_IO_MEM,
+               .iotype         = UPIO_MEM,
                .membase        = (void *)IMX_UART2_BASE,
                .mapbase        = IMX_UART2_BASE, /* FIXME */
                .irq            = UART2_MINT_RX,
                .uartclk        = 16000000,
                .fifosize       = 8,
-               .flags          = ASYNC_BOOT_AUTOCONF,
+               .flags          = UPF_BOOT_AUTOCONF,
                .ops            = &imx_pops,
                .line           = 1,
        },
@@ -743,6 +743,13 @@ static void __init imx_init_ports(void)
 }
 
 #ifdef CONFIG_SERIAL_IMX_CONSOLE
+static void imx_console_putchar(struct uart_port *port, int ch)
+{
+       struct imx_port *sport = (struct imx_port *)port;
+       while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
+               barrier();
+       URTX0((u32)sport->port.membase) = ch;
+}
 
 /*
  * Interrupts are disabled on entering
@@ -751,7 +758,7 @@ static void
 imx_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct imx_port *sport = &imx_ports[co->index];
-       unsigned int old_ucr1, old_ucr2, i;
+       unsigned int old_ucr1, old_ucr2;
 
        /*
         *      First, save UCR1/2 and then disable interrupts
@@ -764,22 +771,7 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
                           & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
        UCR2((u32)sport->port.membase) = old_ucr2 | UCR2_TXEN;
 
-       /*
-        *      Now, do each character
-        */
-       for (i = 0; i < count; i++) {
-
-               while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
-                       barrier();
-
-               URTX0((u32)sport->port.membase) = s[i];
-
-               if (s[i] == '\n') {
-                       while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
-                               barrier();
-                       URTX0((u32)sport->port.membase) = '\r';
-               }
-       }
+       uart_console_write(&sport->port, s, count, imx_console_putchar);
 
        /*
         *      Finally, wait for transmitter to become empty