Input: wistron - add support for Acer TravelMate 2424NWXCi

[powerpc.git] / drivers / serial / mpc52xx_uart.c

diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 61dd17d..7708e5d 100644 (file)
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -40,11 +40,10 @@
  * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
  * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
  * fpr the console code : without this 1:1 mapping, at early boot time, when we
- * are parsing the kernel args console=ttyPSC?, we wouldn't know wich PSC it
+ * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
  * will be mapped to.
  */
 
-#include <linux/config.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/tty.h>
@@ -191,7 +190,7 @@ mpc52xx_uart_startup(struct uart_port *port)
 
        /* Request IRQ */
        ret = request_irq(port->irq, mpc52xx_uart_int,
-               SA_INTERRUPT | SA_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
+               IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
        if (ret)
                return ret;
 
@@ -603,15 +602,14 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
                udelay(1);
 
        /* Write all the chars */
-       for ( i=0 ; i<count ; i++ ) {
-       
-               /* Send the char */
-               out_8(&psc->mpc52xx_psc_buffer_8, *s);
-
+       for (i = 0; i < count; i++, s++) {
                /* Line return handling */
-               if ( *s++ == '\n' )
+               if (*s == '\n')
                        out_8(&psc->mpc52xx_psc_buffer_8, '\r');
                
+               /* Send the char */
+               out_8(&psc->mpc52xx_psc_buffer_8, *s);
+
                /* Wait the TX buffer to be empty */
                j = 20000;      /* Maximum wait */      
                while (!(in_be16(&psc->mpc52xx_psc_status) & 
@@ -694,7 +692,6 @@ static struct uart_driver mpc52xx_uart_driver = {
        .owner          = THIS_MODULE,
        .driver_name    = "mpc52xx_psc_uart",
        .dev_name       = "ttyPSC",
-       .devfs_name     = "ttyPSC",
        .major          = SERIAL_PSC_MAJOR,
        .minor          = SERIAL_PSC_MINOR,
        .nr             = MPC52xx_PSC_MAXNUM,
@@ -729,8 +726,7 @@ mpc52xx_uart_probe(struct platform_device *dev)
 
        spin_lock_init(&port->lock);
        port->uartclk   = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
-       port->fifosize  = 255; /* Should be 512 ! But it can't be */
-                              /* stored in a unsigned char       */
+       port->fifosize  = 512;
        port->iotype    = UPIO_MEM;
        port->flags     = UPF_BOOT_AUTOCONF |
                          ( uart_console(port) ? 0 : UPF_IOREMAP );