#undef DEBUG_HARD
#undef USE_CTRL_O_SYSRQ
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/pmu.h>
#include <linux/bitops.h>
#include <linux/sysrq.h>
+#include <linux/mutex.h>
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pmac_feature.h>
#include <asm/dbdma.h>
#include <asm/macio.h>
-#include <asm/semaphore.h>
#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
*/
static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS];
static int pmz_ports_count;
-static DECLARE_MUTEX(pmz_irq_sem);
+static DEFINE_MUTEX(pmz_irq_mutex);
static struct uart_driver pmz_uart_reg = {
.owner = THIS_MODULE,
.driver_name = "ttyS",
- .devfs_name = "tts/",
.dev_name = "ttyS",
.major = TTY_MAJOR,
};
struct pt_regs *regs)
{
struct tty_struct *tty = NULL;
- unsigned char ch, r1, drop, error;
+ unsigned char ch, r1, drop, error, flag;
int loops = 0;
- retry:
/* The interrupt can be enabled when the port isn't open, typically
* that happens when using one port is open and the other closed (stale
* interrupt) or when one port is used as a console.
error = 0;
drop = 0;
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- /* Have to drop the lock here */
- pmz_debug("pmz: flip overflow\n");
- spin_unlock(&uap->port.lock);
- tty->flip.work.func((void *)tty);
- spin_lock(&uap->port.lock);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- drop = 1;
- if (ZS_IS_ASLEEP(uap))
- return NULL;
- if (!ZS_IS_OPEN(uap))
- goto retry;
- }
-
r1 = read_zsreg(uap, R1);
ch = read_zsdata(uap);
if (drop)
goto next_char;
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ flag = TTY_NORMAL;
uap->port.icount.rx++;
if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) {
uap->port.icount.overrun++;
r1 &= uap->port.read_status_mask;
if (r1 & BRK_ABRT)
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
else if (r1 & PAR_ERR)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (r1 & CRC_ERR)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
}
if (uap->port.ignore_status_mask == 0xff ||
(r1 & uap->port.ignore_status_mask) == 0) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- if ((r1 & Rx_OVR) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, ch, flag);
}
+ if (r1 & Rx_OVR)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
next_char:
/* We can get stuck in an infinite loop getting char 0 when the
* line is in a wrong HW state, we break that here.
if (uap->node == NULL)
return -ENODEV;
- down(&pmz_irq_sem);
+ mutex_lock(&pmz_irq_mutex);
uap->flags |= PMACZILOG_FLAG_IS_OPEN;
}
pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
- if (request_irq(uap->port.irq, pmz_interrupt, SA_SHIRQ, "PowerMac Zilog", uap)) {
+ if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) {
dev_err(&uap->dev->ofdev.dev,
"Unable to register zs interrupt handler.\n");
pmz_set_scc_power(uap, 0);
- up(&pmz_irq_sem);
+ mutex_unlock(&pmz_irq_mutex);
return -ENXIO;
}
- up(&pmz_irq_sem);
+ mutex_unlock(&pmz_irq_mutex);
/* Right now, we deal with delay by blocking here, I'll be
* smarter later on
if (uap->node == NULL)
return;
- down(&pmz_irq_sem);
+ mutex_lock(&pmz_irq_mutex);
/* Release interrupt handler */
free_irq(uap->port.irq, uap);
if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) {
spin_unlock_irqrestore(&port->lock, flags);
- up(&pmz_irq_sem);
+ mutex_unlock(&pmz_irq_mutex);
return;
}
spin_unlock_irqrestore(&port->lock, flags);
- up(&pmz_irq_sem);
+ mutex_unlock(&pmz_irq_mutex);
pmz_debug("pmz: shutdown() done.\n");
}
static int __init pmz_init_port(struct uart_pmac_port *uap)
{
struct device_node *np = uap->node;
- char *conn;
- struct slot_names_prop {
+ const char *conn;
+ const struct slot_names_prop {
int count;
char name[1];
} *slots;
int len;
+ struct resource r_ports, r_rxdma, r_txdma;
/*
* Request & map chip registers
*/
- uap->port.mapbase = np->addrs[0].address;
+ if (of_address_to_resource(np, 0, &r_ports))
+ return -ENODEV;
+ uap->port.mapbase = r_ports.start;
uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
uap->control_reg = uap->port.membase;
* Request & map DBDMA registers
*/
#ifdef HAS_DBDMA
- if (np->n_addrs >= 3 && np->n_intrs >= 3)
+ if (of_address_to_resource(np, 1, &r_txdma) == 0 &&
+ of_address_to_resource(np, 2, &r_rxdma) == 0)
uap->flags |= PMACZILOG_FLAG_HAS_DMA;
+#else
+ memset(&r_txdma, 0, sizeof(struct resource));
+ memset(&r_rxdma, 0, sizeof(struct resource));
#endif
if (ZS_HAS_DMA(uap)) {
- uap->tx_dma_regs = ioremap(np->addrs[np->n_addrs - 2].address, 0x1000);
+ uap->tx_dma_regs = ioremap(r_txdma.start, 0x100);
if (uap->tx_dma_regs == NULL) {
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
goto no_dma;
}
- uap->rx_dma_regs = ioremap(np->addrs[np->n_addrs - 1].address, 0x1000);
+ uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100);
if (uap->rx_dma_regs == NULL) {
iounmap(uap->tx_dma_regs);
uap->tx_dma_regs = NULL;
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
goto no_dma;
}
- uap->tx_dma_irq = np->intrs[1].line;
- uap->rx_dma_irq = np->intrs[2].line;
+ uap->tx_dma_irq = irq_of_parse_and_map(np, 1);
+ uap->rx_dma_irq = irq_of_parse_and_map(np, 2);
}
no_dma:
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
uap->port_type = PMAC_SCC_ASYNC;
/* 1999 Powerbook G3 has slot-names property instead */
- slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+ slots = get_property(np, "slot-names", &len);
if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
if (ZS_IS_INTMODEM(uap)) {
struct device_node* i2c_modem = find_devices("i2c-modem");
if (i2c_modem) {
- char* mid = get_property(i2c_modem, "modem-id", NULL);
+ const char* mid =
+ get_property(i2c_modem, "modem-id", NULL);
if (mid) switch(*mid) {
case 0x04 :
case 0x05 :
/*
* Init remaining bits of "port" structure
*/
- uap->port.iotype = SERIAL_IO_MEM;
- uap->port.irq = np->intrs[0].line;
+ uap->port.iotype = UPIO_MEM;
+ uap->port.irq = irq_of_parse_and_map(np, 0);
uap->port.uartclk = ZS_CLOCK;
uap->port.fifosize = 1;
uap->port.ops = &pmz_pops;
state = pmz_uart_reg.state + uap->port.line;
- down(&pmz_irq_sem);
- down(&state->sem);
+ mutex_lock(&pmz_irq_mutex);
+ mutex_lock(&state->mutex);
spin_lock_irqsave(&uap->port.lock, flags);
/* Shut the chip down */
pmz_set_scc_power(uap, 0);
- up(&state->sem);
- up(&pmz_irq_sem);
+ mutex_unlock(&state->mutex);
+ mutex_unlock(&pmz_irq_mutex);
pmz_debug("suspend, switching complete\n");
state = pmz_uart_reg.state + uap->port.line;
- down(&pmz_irq_sem);
- down(&state->sem);
+ mutex_lock(&pmz_irq_mutex);
+ mutex_lock(&state->mutex);
spin_lock_irqsave(&uap->port.lock, flags);
if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
}
bail:
- up(&state->sem);
- up(&pmz_irq_sem);
+ mutex_unlock(&state->mutex);
+ mutex_unlock(&pmz_irq_mutex);
/* Right now, we deal with delay by blocking here, I'll be
* smarter later on
#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+static void pmz_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+ /* Wait for the transmit buffer to empty. */
+ while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
+ udelay(5);
+ write_zsdata(uap, ch);
+}
+
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
{
struct uart_pmac_port *uap = &pmz_ports[con->index];
unsigned long flags;
- int i;
if (ZS_IS_ASLEEP(uap))
return;
write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB);
write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR);
- for (i = 0; i < count; i++) {
- /* Wait for the transmit buffer to empty. */
- while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
- udelay(5);
- write_zsdata(uap, s[i]);
- if (s[i] == 10) {
- while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
- udelay(5);
- write_zsdata(uap, R13);
- }
- }
+ uart_console_write(&uap->port, s, count, pmz_console_putchar);
/* Restore the values in the registers. */
write_zsreg(uap, R1, uap->curregs[1]);
projects / powerpc.git / blobdiff