#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
-#include "exynos_tmu.h"
+#include <dt-bindings/thermal/thermal_exynos.h>
+
#include "../thermal_core.h"
/* Exynos generic registers */
#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
-#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
-#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
-#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
#define EXYNOS_EMUL_TIME 0x57F0
#define EXYNOS4412_MUX_ADDR_SHIFT 20
/* Exynos5433 specific registers */
-#define EXYNOS5433_TMU_REG_CONTROL1 0x024
-#define EXYNOS5433_TMU_SAMPLING_INTERVAL 0x02c
-#define EXYNOS5433_TMU_COUNTER_VALUE0 0x030
-#define EXYNOS5433_TMU_COUNTER_VALUE1 0x034
-#define EXYNOS5433_TMU_REG_CURRENT_TEMP1 0x044
#define EXYNOS5433_THD_TEMP_RISE3_0 0x050
#define EXYNOS5433_THD_TEMP_RISE7_4 0x054
#define EXYNOS5433_THD_TEMP_FALL3_0 0x060
#define EXYNOS5433_PD_DET_EN 1
-/*exynos5440 specific registers*/
-#define EXYNOS5440_TMU_S0_7_TRIM 0x000
-#define EXYNOS5440_TMU_S0_7_CTRL 0x020
-#define EXYNOS5440_TMU_S0_7_DEBUG 0x040
-#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0
-#define EXYNOS5440_TMU_S0_7_TH0 0x110
-#define EXYNOS5440_TMU_S0_7_TH1 0x130
-#define EXYNOS5440_TMU_S0_7_TH2 0x150
-#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
-#define EXYNOS5440_TMU_S0_7_IRQ 0x230
-/* exynos5440 common registers */
-#define EXYNOS5440_TMU_IRQ_STATUS 0x000
-#define EXYNOS5440_TMU_PMIN 0x004
-
-#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
-#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
-#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
-#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
-#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
-#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
-#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
+#define EXYNOS5433_G3D_BASE 0x10070000
/* Exynos7 specific registers */
#define EXYNOS7_THD_TEMP_RISE7_6 0x50
#define EXYNOS7_TMU_TEMP_MASK 0x1ff
#define EXYNOS7_PD_DET_EN_SHIFT 23
#define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0
-#define EXYNOS7_TMU_INTEN_RISE1_SHIFT 1
-#define EXYNOS7_TMU_INTEN_RISE2_SHIFT 2
-#define EXYNOS7_TMU_INTEN_RISE3_SHIFT 3
-#define EXYNOS7_TMU_INTEN_RISE4_SHIFT 4
-#define EXYNOS7_TMU_INTEN_RISE5_SHIFT 5
-#define EXYNOS7_TMU_INTEN_RISE6_SHIFT 6
-#define EXYNOS7_TMU_INTEN_RISE7_SHIFT 7
#define EXYNOS7_EMUL_DATA_SHIFT 7
#define EXYNOS7_EMUL_DATA_MASK 0x1ff
+#define EXYNOS_FIRST_POINT_TRIM 25
+#define EXYNOS_SECOND_POINT_TRIM 85
+
+#define EXYNOS_NOISE_CANCEL_MODE 4
+
#define MCELSIUS 1000
+
+enum soc_type {
+ SOC_ARCH_EXYNOS3250 = 1,
+ SOC_ARCH_EXYNOS4210,
+ SOC_ARCH_EXYNOS4412,
+ SOC_ARCH_EXYNOS5250,
+ SOC_ARCH_EXYNOS5260,
+ SOC_ARCH_EXYNOS5420,
+ SOC_ARCH_EXYNOS5420_TRIMINFO,
+ SOC_ARCH_EXYNOS5433,
+ SOC_ARCH_EXYNOS7,
+};
+
/**
* struct exynos_tmu_data : A structure to hold the private data of the TMU
driver
* @id: identifier of the one instance of the TMU controller.
- * @pdata: pointer to the tmu platform/configuration data
* @base: base address of the single instance of the TMU controller.
* @base_second: base address of the common registers of the TMU controller.
* @irq: irq number of the TMU controller.
* @clk: pointer to the clock structure.
* @clk_sec: pointer to the clock structure for accessing the base_second.
* @sclk: pointer to the clock structure for accessing the tmu special clk.
+ * @cal_type: calibration type for temperature
+ * @efuse_value: SoC defined fuse value
+ * @min_efuse_value: minimum valid trimming data
+ * @max_efuse_value: maximum valid trimming data
* @temp_error1: fused value of the first point trim.
* @temp_error2: fused value of the second point trim.
+ * @gain: gain of amplifier in the positive-TC generator block
+ * 0 < gain <= 15
+ * @reference_voltage: reference voltage of amplifier
+ * in the positive-TC generator block
+ * 0 < reference_voltage <= 31
* @regulator: pointer to the TMU regulator structure.
* @reg_conf: pointer to structure to register with core thermal.
* @ntrip: number of supported trip points.
*/
struct exynos_tmu_data {
int id;
- struct exynos_tmu_platform_data *pdata;
void __iomem *base;
void __iomem *base_second;
int irq;
struct work_struct irq_work;
struct mutex lock;
struct clk *clk, *clk_sec, *sclk;
+ u32 cal_type;
+ u32 efuse_value;
+ u32 min_efuse_value;
+ u32 max_efuse_value;
u16 temp_error1, temp_error2;
+ u8 gain;
+ u8 reference_voltage;
struct regulator *regulator;
struct thermal_zone_device *tzd;
unsigned int ntrip;
bool enabled;
- int (*tmu_initialize)(struct platform_device *pdev);
+ void (*tmu_set_trip_temp)(struct exynos_tmu_data *data, int trip,
+ u8 temp);
+ void (*tmu_set_trip_hyst)(struct exynos_tmu_data *data, int trip,
+ u8 temp, u8 hyst);
+ void (*tmu_initialize)(struct platform_device *pdev);
void (*tmu_control)(struct platform_device *pdev, bool on);
int (*tmu_read)(struct exynos_tmu_data *data);
void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp);
void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
};
-static void exynos_report_trigger(struct exynos_tmu_data *p)
-{
- char data[10], *envp[] = { data, NULL };
- struct thermal_zone_device *tz = p->tzd;
- int temp;
- unsigned int i;
-
- if (!tz) {
- pr_err("No thermal zone device defined\n");
- return;
- }
-
- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
- mutex_lock(&tz->lock);
- /* Find the level for which trip happened */
- for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
- tz->ops->get_trip_temp(tz, i, &temp);
- if (tz->last_temperature < temp)
- break;
- }
-
- snprintf(data, sizeof(data), "%u", i);
- kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp);
- mutex_unlock(&tz->lock);
-}
-
/*
* TMU treats temperature as a mapped temperature code.
* The temperature is converted differently depending on the calibration type.
*/
static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
{
- struct exynos_tmu_platform_data *pdata = data->pdata;
- int temp_code;
-
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- temp_code = (temp - pdata->first_point_trim) *
- (data->temp_error2 - data->temp_error1) /
- (pdata->second_point_trim - pdata->first_point_trim) +
- data->temp_error1;
- break;
- case TYPE_ONE_POINT_TRIMMING:
- temp_code = temp + data->temp_error1 - pdata->first_point_trim;
- break;
- default:
- temp_code = temp + pdata->default_temp_offset;
- break;
- }
+ if (data->cal_type == TYPE_ONE_POINT_TRIMMING)
+ return temp + data->temp_error1 - EXYNOS_FIRST_POINT_TRIM;
- return temp_code;
+ return (temp - EXYNOS_FIRST_POINT_TRIM) *
+ (data->temp_error2 - data->temp_error1) /
+ (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) +
+ data->temp_error1;
}
/*
*/
static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
{
- struct exynos_tmu_platform_data *pdata = data->pdata;
- int temp;
-
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- temp = (temp_code - data->temp_error1) *
- (pdata->second_point_trim - pdata->first_point_trim) /
- (data->temp_error2 - data->temp_error1) +
- pdata->first_point_trim;
- break;
- case TYPE_ONE_POINT_TRIMMING:
- temp = temp_code - data->temp_error1 + pdata->first_point_trim;
- break;
- default:
- temp = temp_code - pdata->default_temp_offset;
- break;
- }
+ if (data->cal_type == TYPE_ONE_POINT_TRIMMING)
+ return temp_code - data->temp_error1 + EXYNOS_FIRST_POINT_TRIM;
- return temp;
+ return (temp_code - data->temp_error1) *
+ (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) /
+ (data->temp_error2 - data->temp_error1) +
+ EXYNOS_FIRST_POINT_TRIM;
}
static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
{
- struct exynos_tmu_platform_data *pdata = data->pdata;
+ u16 tmu_temp_mask =
+ (data->soc == SOC_ARCH_EXYNOS7) ? EXYNOS7_TMU_TEMP_MASK
+ : EXYNOS_TMU_TEMP_MASK;
- data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
+ data->temp_error1 = trim_info & tmu_temp_mask;
data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK);
if (!data->temp_error1 ||
- (pdata->min_efuse_value > data->temp_error1) ||
- (data->temp_error1 > pdata->max_efuse_value))
- data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
+ (data->min_efuse_value > data->temp_error1) ||
+ (data->temp_error1 > data->max_efuse_value))
+ data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK;
if (!data->temp_error2)
data->temp_error2 =
- (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
+ (data->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK;
}
-static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling)
+static int exynos_tmu_initialize(struct platform_device *pdev)
{
- struct thermal_zone_device *tz = data->tzd;
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct thermal_zone_device *tzd = data->tzd;
const struct thermal_trip * const trips =
- of_thermal_get_trip_points(tz);
- unsigned long temp;
- int i;
+ of_thermal_get_trip_points(tzd);
+ unsigned int status;
+ int ret = 0, temp, hyst;
if (!trips) {
- pr_err("%s: Cannot get trip points from of-thermal.c!\n",
- __func__);
- return 0;
+ dev_err(&pdev->dev,
+ "Cannot get trip points from device tree!\n");
+ return -ENODEV;
}
- for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
- if (trips[i].type == THERMAL_TRIP_CRITICAL)
- continue;
-
- temp = trips[i].temperature / MCELSIUS;
- if (falling)
- temp -= (trips[i].hysteresis / MCELSIUS);
- else
- threshold &= ~(0xff << 8 * i);
-
- threshold |= temp_to_code(data, temp) << 8 * i;
+ if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
+ ret = tzd->ops->get_crit_temp(tzd, &temp);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "No CRITICAL trip point defined in device tree!\n");
+ goto out;
}
- return threshold;
-}
-
-static int exynos_tmu_initialize(struct platform_device *pdev)
-{
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- int ret;
-
- if (of_thermal_get_ntrips(data->tzd) > data->ntrip) {
+ if (of_thermal_get_ntrips(tzd) > data->ntrip) {
dev_info(&pdev->dev,
"More trip points than supported by this TMU.\n");
dev_info(&pdev->dev,
"%d trip points should be configured in polling mode.\n",
- (of_thermal_get_ntrips(data->tzd) - data->ntrip));
+ (of_thermal_get_ntrips(tzd) - data->ntrip));
}
mutex_lock(&data->lock);
clk_enable(data->clk);
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
- ret = data->tmu_initialize(pdev);
+
+ status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+ if (!status) {
+ ret = -EBUSY;
+ } else {
+ int i, ntrips =
+ min_t(int, of_thermal_get_ntrips(tzd), data->ntrip);
+
+ data->tmu_initialize(pdev);
+
+ /* Write temperature code for rising and falling threshold */
+ for (i = 0; i < ntrips; i++) {
+ /* Write temperature code for rising threshold */
+ ret = tzd->ops->get_trip_temp(tzd, i, &temp);
+ if (ret)
+ goto err;
+ temp /= MCELSIUS;
+ data->tmu_set_trip_temp(data, i, temp);
+
+ /* Write temperature code for falling threshold */
+ ret = tzd->ops->get_trip_hyst(tzd, i, &hyst);
+ if (ret)
+ goto err;
+ hyst /= MCELSIUS;
+ data->tmu_set_trip_hyst(data, i, temp, hyst);
+ }
+
+ data->tmu_clear_irqs(data);
+ }
+err:
clk_disable(data->clk);
mutex_unlock(&data->lock);
if (!IS_ERR(data->clk_sec))
clk_disable(data->clk_sec);
-
+out:
return ret;
}
static u32 get_con_reg(struct exynos_tmu_data *data, u32 con)
{
- struct exynos_tmu_platform_data *pdata = data->pdata;
-
if (data->soc == SOC_ARCH_EXYNOS4412 ||
data->soc == SOC_ARCH_EXYNOS3250)
con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT);
con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
- con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
+ con |= data->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
- con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+ con |= (data->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
- if (pdata->noise_cancel_mode) {
- con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
- con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
- }
+ con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
+ con |= (EXYNOS_NOISE_CANCEL_MODE << EXYNOS_TMU_TRIP_MODE_SHIFT);
return con;
}
mutex_unlock(&data->lock);
}
-static int exynos4210_tmu_initialize(struct platform_device *pdev)
+static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
{
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct thermal_zone_device *tz = data->tzd;
const struct thermal_trip * const trips =
- of_thermal_get_trip_points(tz);
- int ret = 0, threshold_code, i;
- unsigned long reference, temp;
- unsigned int status;
+ of_thermal_get_trip_points(data->tzd);
+ u8 ref, th_code;
- if (!trips) {
- pr_err("%s: Cannot get trip points from of-thermal.c!\n",
- __func__);
- ret = -ENODEV;
- goto out;
- }
+ ref = trips[0].temperature / MCELSIUS;
- status = readb(data->base + EXYNOS_TMU_REG_STATUS);
- if (!status) {
- ret = -EBUSY;
- goto out;
+ if (trip == 0) {
+ th_code = temp_to_code(data, ref);
+ writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
}
+ temp -= ref;
+ writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4);
+}
+
+/* failing thresholds are not supported on Exynos4210 */
+static void exynos4210_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+}
+
+static void exynos4210_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+
sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
+}
- /* Write temperature code for threshold */
- reference = trips[0].temperature / MCELSIUS;
- threshold_code = temp_to_code(data, reference);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
- writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
+static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ u32 th, con;
- for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
- temp = trips[i].temperature / MCELSIUS;
- writeb(temp - reference, data->base +
- EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
+ th = readl(data->base + EXYNOS_THD_TEMP_RISE);
+ th &= ~(0xff << 8 * trip);
+ th |= temp_to_code(data, temp) << 8 * trip;
+ writel(th, data->base + EXYNOS_THD_TEMP_RISE);
+
+ if (trip == 3) {
+ con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
+ con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
+}
- data->tmu_clear_irqs(data);
-out:
- return ret;
+static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ u32 th;
+
+ th = readl(data->base + EXYNOS_THD_TEMP_FALL);
+ th &= ~(0xff << 8 * trip);
+ if (hyst)
+ th |= temp_to_code(data, temp - hyst) << 8 * trip;
+ writel(th, data->base + EXYNOS_THD_TEMP_FALL);
}
-static int exynos4412_tmu_initialize(struct platform_device *pdev)
+static void exynos4412_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- const struct thermal_trip * const trips =
- of_thermal_get_trip_points(data->tzd);
- unsigned int status, trim_info, con, ctrl, rising_threshold;
- int ret = 0, threshold_code, i;
- unsigned long crit_temp = 0;
-
- status = readb(data->base + EXYNOS_TMU_REG_STATUS);
- if (!status) {
- ret = -EBUSY;
- goto out;
- }
+ unsigned int trim_info, ctrl;
if (data->soc == SOC_ARCH_EXYNOS3250 ||
data->soc == SOC_ARCH_EXYNOS4412 ||
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
sanitize_temp_error(data, trim_info);
+}
- /* Write temperature code for rising and falling threshold */
- rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE);
- rising_threshold = get_th_reg(data, rising_threshold, false);
- writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
- writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL);
-
- data->tmu_clear_irqs(data);
+static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ unsigned int reg_off, j;
+ u32 th;
- /* if last threshold limit is also present */
- for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) {
- if (trips[i].type == THERMAL_TRIP_CRITICAL) {
- crit_temp = trips[i].temperature;
- break;
- }
+ if (trip > 3) {
+ reg_off = EXYNOS5433_THD_TEMP_RISE7_4;
+ j = trip - 4;
+ } else {
+ reg_off = EXYNOS5433_THD_TEMP_RISE3_0;
+ j = trip;
}
- if (i == of_thermal_get_ntrips(data->tzd)) {
- pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n",
- __func__);
- ret = -EINVAL;
- goto out;
- }
+ th = readl(data->base + reg_off);
+ th &= ~(0xff << j * 8);
+ th |= (temp_to_code(data, temp) << j * 8);
+ writel(th, data->base + reg_off);
+}
- threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
- /* 1-4 level to be assigned in th0 reg */
- rising_threshold &= ~(0xff << 8 * i);
- rising_threshold |= threshold_code << 8 * i;
- writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
- con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
- con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
- writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ unsigned int reg_off, j;
+ u32 th;
-out:
- return ret;
+ if (trip > 3) {
+ reg_off = EXYNOS5433_THD_TEMP_FALL7_4;
+ j = trip - 4;
+ } else {
+ reg_off = EXYNOS5433_THD_TEMP_FALL3_0;
+ j = trip;
+ }
+
+ th = readl(data->base + reg_off);
+ th &= ~(0xff << j * 8);
+ th |= (temp_to_code(data, temp - hyst) << j * 8);
+ writel(th, data->base + reg_off);
}
-static int exynos5433_tmu_initialize(struct platform_device *pdev)
+static void exynos5433_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct exynos_tmu_platform_data *pdata = data->pdata;
- struct thermal_zone_device *tz = data->tzd;
- unsigned int status, trim_info;
- unsigned int rising_threshold = 0, falling_threshold = 0;
- int temp, temp_hist;
- int ret = 0, threshold_code, i, sensor_id, cal_type;
-
- status = readb(data->base + EXYNOS_TMU_REG_STATUS);
- if (!status) {
- ret = -EBUSY;
- goto out;
- }
+ unsigned int trim_info;
+ int sensor_id, cal_type;
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
sanitize_temp_error(data, trim_info);
>> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT;
switch (cal_type) {
- case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
- pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
- break;
case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING:
- pdata->cal_type = TYPE_TWO_POINT_TRIMMING;
+ data->cal_type = TYPE_TWO_POINT_TRIMMING;
break;
+ case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
default:
- pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
+ data->cal_type = TYPE_ONE_POINT_TRIMMING;
break;
}
dev_info(&pdev->dev, "Calibration type is %d-point calibration\n",
cal_type ? 2 : 1);
-
- /* Write temperature code for rising and falling threshold */
- for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
- int rising_reg_offset, falling_reg_offset;
- int j = 0;
-
- switch (i) {
- case 0:
- case 1:
- case 2:
- case 3:
- rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0;
- falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0;
- j = i;
- break;
- case 4:
- case 5:
- case 6:
- case 7:
- rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4;
- falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4;
- j = i - 4;
- break;
- default:
- continue;
- }
-
- /* Write temperature code for rising threshold */
- tz->ops->get_trip_temp(tz, i, &temp);
- temp /= MCELSIUS;
- threshold_code = temp_to_code(data, temp);
-
- rising_threshold = readl(data->base + rising_reg_offset);
- rising_threshold |= (threshold_code << j * 8);
- writel(rising_threshold, data->base + rising_reg_offset);
-
- /* Write temperature code for falling threshold */
- tz->ops->get_trip_hyst(tz, i, &temp_hist);
- temp_hist = temp - (temp_hist / MCELSIUS);
- threshold_code = temp_to_code(data, temp_hist);
-
- falling_threshold = readl(data->base + falling_reg_offset);
- falling_threshold &= ~(0xff << j * 8);
- falling_threshold |= (threshold_code << j * 8);
- writel(falling_threshold, data->base + falling_reg_offset);
- }
-
- data->tmu_clear_irqs(data);
-out:
- return ret;
}
-static int exynos5440_tmu_initialize(struct platform_device *pdev)
+static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
{
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- unsigned int trim_info = 0, con, rising_threshold;
- int threshold_code;
- int crit_temp = 0;
+ unsigned int reg_off, bit_off;
+ u32 th;
- /*
- * For exynos5440 soc triminfo value is swapped between TMU0 and
- * TMU2, so the below logic is needed.
- */
- switch (data->id) {
- case 0:
- trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET +
- EXYNOS5440_TMU_S0_7_TRIM);
- break;
- case 1:
- trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM);
- break;
- case 2:
- trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET +
- EXYNOS5440_TMU_S0_7_TRIM);
- }
- sanitize_temp_error(data, trim_info);
+ reg_off = ((7 - trip) / 2) * 4;
+ bit_off = ((8 - trip) % 2);
- /* Write temperature code for rising and falling threshold */
- rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0);
- rising_threshold = get_th_reg(data, rising_threshold, false);
- writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0);
- writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1);
+ th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+ th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+ th |= temp_to_code(data, temp) << (16 * bit_off);
+ writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+}
- data->tmu_clear_irqs(data);
+static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ unsigned int reg_off, bit_off;
+ u32 th;
- /* if last threshold limit is also present */
- if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) {
- threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
- /* 5th level to be assigned in th2 reg */
- rising_threshold =
- threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT;
- writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2);
- con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL);
- con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
- writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
- }
- /* Clear the PMIN in the common TMU register */
- if (!data->id)
- writel(0, data->base_second + EXYNOS5440_TMU_PMIN);
+ reg_off = ((7 - trip) / 2) * 4;
+ bit_off = ((8 - trip) % 2);
- return 0;
+ th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+ th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+ th |= temp_to_code(data, temp - hyst) << (16 * bit_off);
+ writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
}
-static int exynos7_tmu_initialize(struct platform_device *pdev)
+static void exynos7_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct thermal_zone_device *tz = data->tzd;
- struct exynos_tmu_platform_data *pdata = data->pdata;
- unsigned int status, trim_info;
- unsigned int rising_threshold = 0, falling_threshold = 0;
- int ret = 0, threshold_code, i;
- int temp, temp_hist;
- unsigned int reg_off, bit_off;
-
- status = readb(data->base + EXYNOS_TMU_REG_STATUS);
- if (!status) {
- ret = -EBUSY;
- goto out;
- }
+ unsigned int trim_info;
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
-
- data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK;
- if (!data->temp_error1 ||
- (pdata->min_efuse_value > data->temp_error1) ||
- (data->temp_error1 > pdata->max_efuse_value))
- data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
-
- /* Write temperature code for rising and falling threshold */
- for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) {
- /*
- * On exynos7 there are 4 rising and 4 falling threshold
- * registers (0x50-0x5c and 0x60-0x6c respectively). Each
- * register holds the value of two threshold levels (at bit
- * offsets 0 and 16). Based on the fact that there are atmost
- * eight possible trigger levels, calculate the register and
- * bit offsets where the threshold levels are to be written.
- *
- * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50)
- * [24:16] - Threshold level 7
- * [8:0] - Threshold level 6
- * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54)
- * [24:16] - Threshold level 5
- * [8:0] - Threshold level 4
- *
- * and similarly for falling thresholds.
- *
- * Based on the above, calculate the register and bit offsets
- * for rising/falling threshold levels and populate them.
- */
- reg_off = ((7 - i) / 2) * 4;
- bit_off = ((8 - i) % 2);
-
- tz->ops->get_trip_temp(tz, i, &temp);
- temp /= MCELSIUS;
-
- tz->ops->get_trip_hyst(tz, i, &temp_hist);
- temp_hist = temp - (temp_hist / MCELSIUS);
-
- /* Set 9-bit temperature code for rising threshold levels */
- threshold_code = temp_to_code(data, temp);
- rising_threshold = readl(data->base +
- EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
- rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
- rising_threshold |= threshold_code << (16 * bit_off);
- writel(rising_threshold,
- data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
-
- /* Set 9-bit temperature code for falling threshold levels */
- threshold_code = temp_to_code(data, temp_hist);
- falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
- falling_threshold |= threshold_code << (16 * bit_off);
- writel(falling_threshold,
- data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
- }
-
- data->tmu_clear_irqs(data);
-out:
- return ret;
+ sanitize_temp_error(data, trim_info);
}
static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
- unsigned int con, interrupt_en;
+ unsigned int con, interrupt_en = 0, i;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
- con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en =
- (of_thermal_is_trip_valid(tz, 3)
- << EXYNOS_TMU_INTEN_RISE3_SHIFT) |
- (of_thermal_is_trip_valid(tz, 2)
- << EXYNOS_TMU_INTEN_RISE2_SHIFT) |
- (of_thermal_is_trip_valid(tz, 1)
- << EXYNOS_TMU_INTEN_RISE1_SHIFT) |
- (of_thermal_is_trip_valid(tz, 0)
- << EXYNOS_TMU_INTEN_RISE0_SHIFT);
+ for (i = 0; i < data->ntrip; i++) {
+ if (!of_thermal_is_trip_valid(tz, i))
+ continue;
+
+ interrupt_en |=
+ (1 << (EXYNOS_TMU_INTEN_RISE0_SHIFT + i * 4));
+ }
if (data->soc != SOC_ARCH_EXYNOS4210)
interrupt_en |=
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en = 0; /* Disable all interrupts */
}
+
writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
- unsigned int con, interrupt_en, pd_det_en;
+ unsigned int con, interrupt_en = 0, pd_det_en, i;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
- con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en =
- (of_thermal_is_trip_valid(tz, 7)
- << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
- (of_thermal_is_trip_valid(tz, 6)
- << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
- (of_thermal_is_trip_valid(tz, 5)
- << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
- (of_thermal_is_trip_valid(tz, 4)
- << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
- (of_thermal_is_trip_valid(tz, 3)
- << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
- (of_thermal_is_trip_valid(tz, 2)
- << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
- (of_thermal_is_trip_valid(tz, 1)
- << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
- (of_thermal_is_trip_valid(tz, 0)
- << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
+ for (i = 0; i < data->ntrip; i++) {
+ if (!of_thermal_is_trip_valid(tz, i))
+ continue;
+
+ interrupt_en |=
+ (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
+ }
interrupt_en |=
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
- } else {
+
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ } else
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en = 0; /* Disable all interrupts */
- }
pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
-static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
-{
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct thermal_zone_device *tz = data->tzd;
- unsigned int con, interrupt_en;
-
- con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL));
-
- if (on) {
- con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en =
- (of_thermal_is_trip_valid(tz, 3)
- << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) |
- (of_thermal_is_trip_valid(tz, 2)
- << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) |
- (of_thermal_is_trip_valid(tz, 1)
- << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) |
- (of_thermal_is_trip_valid(tz, 0)
- << EXYNOS5440_TMU_INTEN_RISE0_SHIFT);
- interrupt_en |=
- interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
- } else {
- con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en = 0; /* Disable all interrupts */
- }
- writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN);
- writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
-}
-
static void exynos7_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
- unsigned int con, interrupt_en;
+ unsigned int con, interrupt_en = 0, i;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
- con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
- interrupt_en =
- (of_thermal_is_trip_valid(tz, 7)
- << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
- (of_thermal_is_trip_valid(tz, 6)
- << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
- (of_thermal_is_trip_valid(tz, 5)
- << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
- (of_thermal_is_trip_valid(tz, 4)
- << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
- (of_thermal_is_trip_valid(tz, 3)
- << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
- (of_thermal_is_trip_valid(tz, 2)
- << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
- (of_thermal_is_trip_valid(tz, 1)
- << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
- (of_thermal_is_trip_valid(tz, 0)
- << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
+ for (i = 0; i < data->ntrip; i++) {
+ if (!of_thermal_is_trip_valid(tz, i))
+ continue;
+
+ interrupt_en |=
+ (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
+ }
interrupt_en |=
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT);
- interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
if (!data || !data->tmu_read || !data->enabled)
return -EINVAL;
+ else if (!data->enabled)
+ /*
+ * Called too early, probably
+ * from thermal_zone_of_sensor_register().
+ */
+ return -EAGAIN;
mutex_lock(&data->lock);
clk_enable(data->clk);
if (temp) {
temp /= MCELSIUS;
- if (data->soc != SOC_ARCH_EXYNOS5440) {
- val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
- val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
- }
+ val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
+ val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
if (data->soc == SOC_ARCH_EXYNOS7) {
val &= ~(EXYNOS7_EMUL_DATA_MASK <<
EXYNOS7_EMUL_DATA_SHIFT);
writel(val, data->base + emul_con);
}
-static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data,
- int temp)
-{
- unsigned int val;
-
- val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG);
- val = get_emul_con_reg(data, val, temp);
- writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG);
-}
-
static int exynos_tmu_set_emulation(void *drv_data, int temp)
{
struct exynos_tmu_data *data = drv_data;
}
#else
#define exynos4412_tmu_set_emulation NULL
-#define exynos5440_tmu_set_emulation NULL
static int exynos_tmu_set_emulation(void *drv_data, int temp)
{ return -EINVAL; }
#endif /* CONFIG_THERMAL_EMULATION */
return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
}
-static int exynos5440_tmu_read(struct exynos_tmu_data *data)
-{
- return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP);
-}
-
static int exynos7_tmu_read(struct exynos_tmu_data *data)
{
return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
{
struct exynos_tmu_data *data = container_of(work,
struct exynos_tmu_data, irq_work);
- unsigned int val_type;
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
- /* Find which sensor generated this interrupt */
- if (data->soc == SOC_ARCH_EXYNOS5440) {
- val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS);
- if (!((val_type >> data->id) & 0x1))
- goto out;
- }
if (!IS_ERR(data->clk_sec))
clk_disable(data->clk_sec);
- exynos_report_trigger(data);
+ thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED);
+
mutex_lock(&data->lock);
clk_enable(data->clk);
clk_disable(data->clk);
mutex_unlock(&data->lock);
-out:
enable_irq(data->irq);
}
writel(val_irq, data->base + tmu_intclear);
}
-static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data)
-{
- unsigned int val_irq;
-
- val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ);
- /* clear the interrupts */
- writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ);
-}
-
static irqreturn_t exynos_tmu_irq(int irq, void *id)
{
struct exynos_tmu_data *data = id;
}
static const struct of_device_id exynos_tmu_match[] = {
- { .compatible = "samsung,exynos3250-tmu", },
- { .compatible = "samsung,exynos4210-tmu", },
- { .compatible = "samsung,exynos4412-tmu", },
- { .compatible = "samsung,exynos5250-tmu", },
- { .compatible = "samsung,exynos5260-tmu", },
- { .compatible = "samsung,exynos5420-tmu", },
- { .compatible = "samsung,exynos5420-tmu-ext-triminfo", },
- { .compatible = "samsung,exynos5433-tmu", },
- { .compatible = "samsung,exynos5440-tmu", },
- { .compatible = "samsung,exynos7-tmu", },
- { /* sentinel */ },
+ {
+ .compatible = "samsung,exynos3250-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS3250,
+ }, {
+ .compatible = "samsung,exynos4210-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS4210,
+ }, {
+ .compatible = "samsung,exynos4412-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS4412,
+ }, {
+ .compatible = "samsung,exynos5250-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5250,
+ }, {
+ .compatible = "samsung,exynos5260-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5260,
+ }, {
+ .compatible = "samsung,exynos5420-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5420,
+ }, {
+ .compatible = "samsung,exynos5420-tmu-ext-triminfo",
+ .data = (const void *)SOC_ARCH_EXYNOS5420_TRIMINFO,
+ }, {
+ .compatible = "samsung,exynos5433-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5433,
+ }, {
+ .compatible = "samsung,exynos7-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS7,
+ },
+ { },
};
MODULE_DEVICE_TABLE(of, exynos_tmu_match);
-static int exynos_of_get_soc_type(struct device_node *np)
-{
- if (of_device_is_compatible(np, "samsung,exynos3250-tmu"))
- return SOC_ARCH_EXYNOS3250;
- else if (of_device_is_compatible(np, "samsung,exynos4210-tmu"))
- return SOC_ARCH_EXYNOS4210;
- else if (of_device_is_compatible(np, "samsung,exynos4412-tmu"))
- return SOC_ARCH_EXYNOS4412;
- else if (of_device_is_compatible(np, "samsung,exynos5250-tmu"))
- return SOC_ARCH_EXYNOS5250;
- else if (of_device_is_compatible(np, "samsung,exynos5260-tmu"))
- return SOC_ARCH_EXYNOS5260;
- else if (of_device_is_compatible(np, "samsung,exynos5420-tmu"))
- return SOC_ARCH_EXYNOS5420;
- else if (of_device_is_compatible(np,
- "samsung,exynos5420-tmu-ext-triminfo"))
- return SOC_ARCH_EXYNOS5420_TRIMINFO;
- else if (of_device_is_compatible(np, "samsung,exynos5433-tmu"))
- return SOC_ARCH_EXYNOS5433;
- else if (of_device_is_compatible(np, "samsung,exynos5440-tmu"))
- return SOC_ARCH_EXYNOS5440;
- else if (of_device_is_compatible(np, "samsung,exynos7-tmu"))
- return SOC_ARCH_EXYNOS7;
-
- return -EINVAL;
-}
-
-static int exynos_of_sensor_conf(struct device_node *np,
- struct exynos_tmu_platform_data *pdata)
-{
- u32 value;
- int ret;
-
- of_node_get(np);
-
- ret = of_property_read_u32(np, "samsung,tmu_gain", &value);
- pdata->gain = (u8)value;
- of_property_read_u32(np, "samsung,tmu_reference_voltage", &value);
- pdata->reference_voltage = (u8)value;
- of_property_read_u32(np, "samsung,tmu_noise_cancel_mode", &value);
- pdata->noise_cancel_mode = (u8)value;
-
- of_property_read_u32(np, "samsung,tmu_efuse_value",
- &pdata->efuse_value);
- of_property_read_u32(np, "samsung,tmu_min_efuse_value",
- &pdata->min_efuse_value);
- of_property_read_u32(np, "samsung,tmu_max_efuse_value",
- &pdata->max_efuse_value);
-
- of_property_read_u32(np, "samsung,tmu_first_point_trim", &value);
- pdata->first_point_trim = (u8)value;
- of_property_read_u32(np, "samsung,tmu_second_point_trim", &value);
- pdata->second_point_trim = (u8)value;
- of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value);
- pdata->default_temp_offset = (u8)value;
-
- of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type);
-
- of_node_put(np);
- return 0;
-}
-
static int exynos_map_dt_data(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct exynos_tmu_platform_data *pdata;
struct resource res;
if (!data || !pdev->dev.of_node)
return -EADDRNOTAVAIL;
}
- pdata = devm_kzalloc(&pdev->dev,
- sizeof(struct exynos_tmu_platform_data),
- GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
-
- exynos_of_sensor_conf(pdev->dev.of_node, pdata);
- data->pdata = pdata;
- data->soc = exynos_of_get_soc_type(pdev->dev.of_node);
+ data->soc = (enum soc_type)of_device_get_match_data(&pdev->dev);
switch (data->soc) {
case SOC_ARCH_EXYNOS4210:
+ data->tmu_set_trip_temp = exynos4210_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos4210_tmu_set_trip_hyst;
data->tmu_initialize = exynos4210_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
data->tmu_read = exynos4210_tmu_read;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
data->ntrip = 4;
+ data->gain = 15;
+ data->reference_voltage = 7;
+ data->efuse_value = 55;
+ data->min_efuse_value = 40;
+ data->max_efuse_value = 100;
break;
case SOC_ARCH_EXYNOS3250:
case SOC_ARCH_EXYNOS4412:
case SOC_ARCH_EXYNOS5260:
case SOC_ARCH_EXYNOS5420:
case SOC_ARCH_EXYNOS5420_TRIMINFO:
+ data->tmu_set_trip_temp = exynos4412_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos4412_tmu_set_trip_hyst;
data->tmu_initialize = exynos4412_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
data->tmu_read = exynos4412_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
data->ntrip = 4;
+ data->gain = 8;
+ data->reference_voltage = 16;
+ data->efuse_value = 55;
+ if (data->soc != SOC_ARCH_EXYNOS5420 &&
+ data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
+ data->min_efuse_value = 40;
+ else
+ data->min_efuse_value = 0;
+ data->max_efuse_value = 100;
break;
case SOC_ARCH_EXYNOS5433:
+ data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos5433_tmu_set_trip_hyst;
data->tmu_initialize = exynos5433_tmu_initialize;
data->tmu_control = exynos5433_tmu_control;
data->tmu_read = exynos4412_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
data->ntrip = 8;
- break;
- case SOC_ARCH_EXYNOS5440:
- data->tmu_initialize = exynos5440_tmu_initialize;
- data->tmu_control = exynos5440_tmu_control;
- data->tmu_read = exynos5440_tmu_read;
- data->tmu_set_emulation = exynos5440_tmu_set_emulation;
- data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
- data->ntrip = 4;
+ data->gain = 8;
+ if (res.start == EXYNOS5433_G3D_BASE)
+ data->reference_voltage = 23;
+ else
+ data->reference_voltage = 16;
+ data->efuse_value = 75;
+ data->min_efuse_value = 40;
+ data->max_efuse_value = 150;
break;
case SOC_ARCH_EXYNOS7:
+ data->tmu_set_trip_temp = exynos7_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos7_tmu_set_trip_hyst;
data->tmu_initialize = exynos7_tmu_initialize;
data->tmu_control = exynos7_tmu_control;
data->tmu_read = exynos7_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
data->ntrip = 8;
+ data->gain = 9;
+ data->reference_voltage = 17;
+ data->efuse_value = 75;
+ data->min_efuse_value = 15;
+ data->max_efuse_value = 100;
break;
default:
dev_err(&pdev->dev, "Platform not supported\n");
return -EINVAL;
}
+ data->cal_type = TYPE_ONE_POINT_TRIMMING;
+
/*
* Check if the TMU shares some registers and then try to map the
* memory of common registers.
*/
- if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO &&
- data->soc != SOC_ARCH_EXYNOS5440)
+ if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
return 0;
if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
projects / linux / blobdiff