*/
#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG
-#endif
-
#include <linux/module.h>
#include <linux/version.h>
#include <linux/kernel.h>
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
0x00, 0x00, /* __le16 idVendor; */
0x00, 0x00, /* __le16 idProduct; */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
0x00, 0x00, /* __le16 idVendor; */
0x00, 0x00, /* __le16 idProduct; */
default:
/* non-generic request */
- if (HC_IS_SUSPENDED (hcd->state))
- status = -EAGAIN;
- else {
- switch (typeReq) {
- case GetHubStatus:
- case GetPortStatus:
- len = 4;
- break;
- case GetHubDescriptor:
- len = sizeof (struct usb_hub_descriptor);
- break;
- }
- status = hcd->driver->hub_control (hcd,
- typeReq, wValue, wIndex,
- tbuf, wLength);
+ switch (typeReq) {
+ case GetHubStatus:
+ case GetPortStatus:
+ len = 4;
+ break;
+ case GetHubDescriptor:
+ len = sizeof (struct usb_hub_descriptor);
+ break;
}
+ status = hcd->driver->hub_control (hcd,
+ typeReq, wValue, wIndex,
+ tbuf, wLength);
break;
error:
/* "protocol stall" on error */
"CTRL: TypeReq=0x%x val=0x%x "
"idx=0x%x len=%d ==> %d\n",
typeReq, wValue, wIndex,
- wLength, urb->status);
+ wLength, status);
}
}
if (len) {
{
struct usb_bus *bus;
- bus = kmalloc (sizeof *bus, GFP_KERNEL);
+ bus = kzalloc (sizeof *bus, GFP_KERNEL);
if (!bus)
return NULL;
- memset(bus, 0, sizeof(struct usb_bus));
usb_bus_init (bus);
bus->op = op;
return bus;
return -E2BIG;
}
- bus->class_dev = class_device_create(usb_host_class, MKDEV(0,0), bus->controller, "usb_host%d", busnum);
+ bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0),
+ bus->controller, "usb_host%d", busnum);
if (IS_ERR(bus->class_dev)) {
clear_bit(busnum, busmap.busmap);
up(&usb_bus_list_lock);
list_add (&bus->bus_list, &usb_bus_list);
up (&usb_bus_list_lock);
- usbfs_add_bus (bus);
- usbmon_notify_bus_add (bus);
+ usb_notify_add_bus(bus);
dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
return 0;
list_del (&bus->bus_list);
up (&usb_bus_list_lock);
- usbmon_notify_bus_remove (bus);
- usbfs_remove_bus (bus);
+ usb_notify_remove_bus(bus);
clear_bit (bus->busnum, busmap.busmap);
else switch (hcd->state) {
case HC_STATE_RUNNING:
case HC_STATE_RESUMING:
+doit:
usb_get_dev (urb->dev);
list_add_tail (&urb->urb_list, &ep->urb_list);
status = 0;
break;
+ case HC_STATE_SUSPENDED:
+ /* HC upstream links (register access, wakeup signaling) can work
+ * even when the downstream links (and DMA etc) are quiesced; let
+ * usbcore talk to the root hub.
+ */
+ if (hcd->self.controller->power.power_state.event == PM_EVENT_ON
+ && urb->dev->parent == NULL)
+ goto doit;
+ /* FALL THROUGH */
default:
status = -ESHUTDOWN;
break;
goto done;
}
- /* running ~= hc unlink handshake works (irq, timer, etc)
- * halted ~= no unlink handshake is needed
- * suspended, resuming == should never happen
- */
- WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT);
-
/* insist the urb is still queued */
list_for_each(tmp, &ep->urb_list) {
if (tmp == &urb->urb_list)
* finish unlinking the initial failed usb_set_address()
* or device descriptor fetch.
*/
- if (!hcd->saw_irq && hcd->self.root_hub != urb->dev) {
+ if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags)
+ && hcd->self.root_hub != urb->dev) {
dev_warn (hcd->self.controller, "Unlink after no-IRQ? "
"Controller is probably using the wrong IRQ."
"\n");
- hcd->saw_irq = 1;
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
}
urb->status = status;
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_USB_SUSPEND
+#ifdef CONFIG_PM
-static int hcd_hub_suspend (struct usb_bus *bus)
+int hcd_bus_suspend (struct usb_bus *bus)
{
struct usb_hcd *hcd;
+ int status;
hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_suspend)
- return hcd->driver->hub_suspend (hcd);
- return 0;
+ if (!hcd->driver->bus_suspend)
+ return -ENOENT;
+ hcd->state = HC_STATE_QUIESCING;
+ status = hcd->driver->bus_suspend (hcd);
+ if (status == 0)
+ hcd->state = HC_STATE_SUSPENDED;
+ else
+ dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
+ "suspend", status);
+ return status;
}
-static int hcd_hub_resume (struct usb_bus *bus)
+int hcd_bus_resume (struct usb_bus *bus)
{
struct usb_hcd *hcd;
+ int status;
hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_resume)
- return hcd->driver->hub_resume (hcd);
- return 0;
+ if (!hcd->driver->bus_resume)
+ return -ENOENT;
+ if (hcd->state == HC_STATE_RUNNING)
+ return 0;
+ hcd->state = HC_STATE_RESUMING;
+ status = hcd->driver->bus_resume (hcd);
+ if (status == 0)
+ hcd->state = HC_STATE_RUNNING;
+ else {
+ dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
+ "resume", status);
+ usb_hc_died(hcd);
+ }
+ return status;
+}
+
+/*
+ * usb_hcd_suspend_root_hub - HCD autosuspends downstream ports
+ * @hcd: host controller for this root hub
+ *
+ * This call arranges that usb_hcd_resume_root_hub() is safe to call later;
+ * that the HCD's root hub polling is deactivated; and that the root's hub
+ * driver is suspended. HCDs may call this to autosuspend when their root
+ * hub's downstream ports are all inactive: unpowered, disconnected,
+ * disabled, or suspended.
+ *
+ * The HCD will autoresume on device connect change detection (using SRP
+ * or a D+/D- pullup). The HCD also autoresumes on remote wakeup signaling
+ * from any ports that are suspended (if that is enabled). In most cases,
+ * overcurrent signaling (on powered ports) will also start autoresume.
+ *
+ * Always called with IRQs blocked.
+ */
+void usb_hcd_suspend_root_hub (struct usb_hcd *hcd)
+{
+ struct urb *urb;
+
+ spin_lock (&hcd_root_hub_lock);
+ usb_suspend_root_hub (hcd->self.root_hub);
+
+ /* force status urb to complete/unlink while suspended */
+ if (hcd->status_urb) {
+ urb = hcd->status_urb;
+ urb->status = -ECONNRESET;
+ urb->hcpriv = NULL;
+ urb->actual_length = 0;
+
+ del_timer (&hcd->rh_timer);
+ hcd->poll_pending = 0;
+ hcd->status_urb = NULL;
+ } else
+ urb = NULL;
+ spin_unlock (&hcd_root_hub_lock);
+ hcd->state = HC_STATE_SUSPENDED;
+
+ if (urb)
+ usb_hcd_giveback_urb (hcd, urb, NULL);
}
+EXPORT_SYMBOL_GPL(usb_hcd_suspend_root_hub);
/**
* usb_hcd_resume_root_hub - called by HCD to resume its root hub
* The USB host controller calls this function when its root hub is
* suspended (with the remote wakeup feature enabled) and a remote
* wakeup request is received. It queues a request for khubd to
- * resume the root hub.
+ * resume the root hub (that is, manage its downstream ports again).
*/
void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
{
usb_resume_root_hub (hcd->self.root_hub);
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
}
+EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
-#else
-void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
-{
-}
#endif
-EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
/*-------------------------------------------------------------------------*/
.buffer_alloc = hcd_buffer_alloc,
.buffer_free = hcd_buffer_free,
.disable = hcd_endpoint_disable,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = hcd_hub_suspend,
- .hub_resume = hcd_hub_resume,
-#endif
};
/*-------------------------------------------------------------------------*/
struct usb_hcd *hcd = __hcd;
int start = hcd->state;
- if (start == HC_STATE_HALT)
+ if (unlikely(start == HC_STATE_HALT ||
+ !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
return IRQ_NONE;
if (hcd->driver->irq (hcd, r) == IRQ_NONE)
return IRQ_NONE;
- hcd->saw_irq = 1;
- if (hcd->state == HC_STATE_HALT)
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+ if (unlikely(hcd->state == HC_STATE_HALT))
usb_hc_died (hcd);
return IRQ_HANDLED;
}
dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
/* till now HC has been in an indeterminate state ... */
if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
dev_err(hcd->self.controller, "can't reset\n");
projects / powerpc.git / blobdiff