/* completion function, fires on port status changes and various faults */
-static void hub_irq(struct urb *urb, struct pt_regs *regs)
+static void hub_irq(struct urb *urb)
{
- struct usb_hub *hub = (struct usb_hub *)urb->context;
+ struct usb_hub *hub = urb->context;
int status;
int i;
unsigned long bits;
goto resubmit;
hub->error = urb->status;
/* FALL THROUGH */
-
+
/* let khubd handle things */
case 0: /* we got data: port status changed */
bits = 0;
msleep(max(pgood_delay, (unsigned) 100));
}
-static inline void __hub_quiesce(struct usb_hub *hub)
+static void hub_quiesce(struct usb_hub *hub)
{
/* (nonblocking) khubd and related activity won't re-trigger */
hub->quiescing = 1;
hub->activating = 0;
hub->resume_root_hub = 0;
-}
-static void hub_quiesce(struct usb_hub *hub)
-{
/* (blocking) stop khubd and related activity */
- __hub_quiesce(hub);
usb_kill_urb(hub->urb);
if (hub->has_indicators)
cancel_delayed_work(&hub->leds);
endpoint = &desc->endpoint[0].desc;
- /* Output endpoint? Curiouser and curiouser.. */
- if (!(endpoint->bEndpointAddress & USB_DIR_IN))
- goto descriptor_error;
-
- /* If it's not an interrupt endpoint, we'd better punt! */
- if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- != USB_ENDPOINT_XFER_INT)
+ /* If it's not an interrupt in endpoint, we'd better punt! */
+ if (!usb_endpoint_is_int_in(endpoint))
goto descriptor_error;
/* We found a hub */
if (udev->state == USB_STATE_NOTATTACHED)
; /* do nothing */
else if (new_state != USB_STATE_NOTATTACHED) {
- udev->state = new_state;
/* root hub wakeup capabilities are managed out-of-band
* and may involve silicon errata ... ignore them here.
*/
if (udev->parent) {
- if (new_state == USB_STATE_CONFIGURED)
+ if (udev->state == USB_STATE_SUSPENDED
+ || new_state == USB_STATE_SUSPENDED)
+ ; /* No change to wakeup settings */
+ else if (new_state == USB_STATE_CONFIGURED)
device_init_wakeup(&udev->dev,
(udev->actconfig->desc.bmAttributes
& USB_CONFIG_ATT_WAKEUP));
- else if (new_state != USB_STATE_SUSPENDED)
+ else
device_init_wakeup(&udev->dev, 0);
}
+ udev->state = new_state;
} else
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM
/**
* usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power
unsigned long flags;
dev_warn(&rhdev->dev, "root hub lost power or was reset\n");
+
+ /* Make sure no potential wakeup events get lost,
+ * by forcing the root hub to be resumed.
+ */
+ rhdev->dev.power.prev_state.event = PM_EVENT_ON;
+
spin_lock_irqsave(&device_state_lock, flags);
hub = hdev_to_hub(rhdev);
for (port1 = 1; port1 <= rhdev->maxchild; ++port1) {
}
EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
-#endif
+#endif /* CONFIG_PM */
static void choose_address(struct usb_device *udev)
{
#ifdef CONFIG_USB_OTG
#include "otg_whitelist.h"
+static int __usb_port_suspend(struct usb_device *, int port1);
#endif
/**
USB_DT_OTG, (void **) &desc) == 0) {
if (desc->bmAttributes & USB_OTG_HNP) {
unsigned port1 = udev->portnum;
- struct usb_device *root = udev->parent;
-
+
dev_info(&udev->dev,
"Dual-Role OTG device on %sHNP port\n",
(port1 == bus->otg_port)
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- static int __usb_port_suspend(struct usb_device *,
- int port1);
err = __usb_port_suspend(udev, udev->bus->otg_port);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
return ret;
}
+
+/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
+static unsigned hub_is_wusb(struct usb_hub *hub)
+{
+ struct usb_hcd *hcd;
+ if (hub->hdev->parent != NULL) /* not a root hub? */
+ return 0;
+ hcd = container_of(hub->hdev->bus, struct usb_hcd, self);
+ return hcd->wireless;
+}
+
+
#define PORT_RESET_TRIES 5
#define SET_ADDRESS_TRIES 2
#define GET_DESCRIPTOR_TRIES 2
/* if we`ve finished resetting, then break out of the loop */
if (!(portstatus & USB_PORT_STAT_RESET) &&
(portstatus & USB_PORT_STAT_ENABLE)) {
- if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+ if (hub_is_wusb(hub))
+ udev->speed = USB_SPEED_VARIABLE;
+ else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
udev->speed = USB_SPEED_HIGH;
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
udev->speed = USB_SPEED_LOW;
kick_khubd(hub);
}
+#ifdef CONFIG_PM
#ifdef CONFIG_USB_SUSPEND
* NOTE: OTG devices may issue remote wakeup (or SRP) even when
* we don't explicitly enable it here.
*/
- if (device_may_wakeup(&udev->dev)) {
+ if (udev->do_remote_wakeup) {
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
USB_CTRL_SET_TIMEOUT);
} else {
/* device has up to 10 msec to fully suspend */
- dev_dbg(&udev->dev, "usb suspend\n");
+ dev_dbg(&udev->dev, "usb %ssuspend\n",
+ udev->auto_pm ? "auto-" : "");
usb_set_device_state(udev, USB_STATE_SUSPENDED);
msleep(10);
}
status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
udev);
else {
- dev_dbg(&udev->dev, "usb suspend\n");
+ dev_dbg(&udev->dev, "usb %ssuspend\n",
+ udev->auto_pm ? "auto-" : "");
usb_set_device_state(udev, USB_STATE_SUSPENDED);
}
return status;
}
-#endif
-
/*
* usb_port_suspend - suspend a usb device's upstream port
* @udev: device that's no longer in active use
*/
int usb_port_suspend(struct usb_device *udev)
{
-#ifdef CONFIG_USB_SUSPEND
return __usb_port_suspend(udev, udev->portnum);
-#else
- return 0;
-#endif
}
/*
return status;
}
-#ifdef CONFIG_USB_SUSPEND
-
static int
hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
{
// dev_dbg(hub->intfdev, "resume port %d\n", port1);
+ set_bit(port1, hub->busy_bits);
+
/* see 7.1.7.7; affects power usage, but not budgeting */
status = clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_SUSPEND);
/* drive resume for at least 20 msec */
if (udev)
- dev_dbg(&udev->dev, "RESUME\n");
+ dev_dbg(&udev->dev, "usb %sresume\n",
+ udev->auto_pm ? "auto-" : "");
msleep(25);
#define LIVE_FLAGS ( USB_PORT_STAT_POWER \
if (status < 0)
hub_port_logical_disconnect(hub, port1);
+ clear_bit(port1, hub->busy_bits);
+ if (!hub->hdev->parent && !hub->busy_bits[0])
+ usb_enable_root_hub_irq(hub->hdev->bus);
+
return status;
}
-#endif
-
/*
* usb_port_resume - re-activate a suspended usb device's upstream port
* @udev: device to re-activate
*/
int usb_port_resume(struct usb_device *udev)
{
- int status = 0;
+ int status;
/* we change the device's upstream USB link,
* but root hubs have no upstream USB link.
*/
if (udev->parent) {
-#ifdef CONFIG_USB_SUSPEND
// NOTE this fails if parent is also suspended...
status = hub_port_resume(hdev_to_hub(udev->parent),
udev->portnum, udev);
-#endif
- } else
+ } else {
+ dev_dbg(&udev->dev, "usb %sresume\n",
+ udev->auto_pm ? "auto-" : "");
status = finish_port_resume(udev);
+ }
if (status < 0)
dev_dbg(&udev->dev, "can't resume, status %d\n", status);
return status;
{
int status = 0;
-#ifdef CONFIG_USB_SUSPEND
+ /* All this just to avoid sending a port-resume message
+ * to the parent hub! */
- /* don't repeat RESUME sequence if this device
- * was already woken up by some other task
- */
usb_lock_device(udev);
+ usb_pm_lock(udev);
if (udev->state == USB_STATE_SUSPENDED) {
- dev_dbg(&udev->dev, "RESUME (wakeup)\n");
+ dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
/* TRSMRCY = 10 msec */
msleep(10);
status = finish_port_resume(udev);
+ if (status == 0)
+ udev->dev.power.power_state.event = PM_EVENT_ON;
}
+ usb_pm_unlock(udev);
if (status == 0)
- usb_resume_both(udev);
+ usb_autoresume_device(udev, 0);
usb_unlock_device(udev);
-#endif
return status;
}
+#else /* CONFIG_USB_SUSPEND */
+
+/* When CONFIG_USB_SUSPEND isn't set, we never suspend or resume any ports. */
+
+int usb_port_suspend(struct usb_device *udev)
+{
+ return 0;
+}
+
+static inline int
+finish_port_resume(struct usb_device *udev)
+{
+ return 0;
+}
+
+static inline int
+hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
+{
+ return 0;
+}
+
+int usb_port_resume(struct usb_device *udev)
+{
+ return 0;
+}
+
+static inline int remote_wakeup(struct usb_device *udev)
+{
+ return 0;
+}
+
+#endif
+
static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
{
struct usb_hub *hub = usb_get_intfdata (intf);
== PM_EVENT_ON
#endif
) {
- dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
+ if (!hdev->auto_pm)
+ dev_dbg(&intf->dev, "port %d nyet suspended\n",
+ port1);
return -EBUSY;
}
}
return 0;
}
-void usb_suspend_root_hub(struct usb_device *hdev)
-{
- struct usb_hub *hub = hdev_to_hub(hdev);
+#else /* CONFIG_PM */
- /* This also makes any led blinker stop retriggering. We're called
- * from irq, so the blinker might still be scheduled. Caller promises
- * that the root hub status URB will be canceled.
- */
- __hub_quiesce(hub);
- mark_quiesced(to_usb_interface(hub->intfdev));
+static inline int remote_wakeup(struct usb_device *udev)
+{
+ return 0;
}
+#define hub_suspend NULL
+#define hub_resume NULL
+#endif
+
void usb_resume_root_hub(struct usb_device *hdev)
{
struct usb_hub *hub = hdev_to_hub(hdev);
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
+ char *speed, *type;
/* root hub ports have a slightly longer reset period
* (from USB 2.0 spec, section 7.1.7.5)
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
* it's fixed size except for full speed devices.
+ * For Wireless USB devices, ep0 max packet is always 512 (tho
+ * reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
*/
switch (udev->speed) {
+ case USB_SPEED_VARIABLE: /* fixed at 512 */
+ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512);
+ break;
case USB_SPEED_HIGH: /* fixed at 64 */
udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
break;
goto fail;
}
+ type = "";
+ switch (udev->speed) {
+ case USB_SPEED_LOW: speed = "low"; break;
+ case USB_SPEED_FULL: speed = "full"; break;
+ case USB_SPEED_HIGH: speed = "high"; break;
+ case USB_SPEED_VARIABLE:
+ speed = "variable";
+ type = "Wireless ";
+ break;
+ default: speed = "?"; break;
+ }
dev_info (&udev->dev,
- "%s %s speed USB device using %s and address %d\n",
- (udev->config) ? "reset" : "new",
- ({ char *speed; switch (udev->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }; speed;}),
- udev->bus->controller->driver->name,
- udev->devnum);
+ "%s %s speed %sUSB device using %s and address %d\n",
+ (udev->config) ? "reset" : "new", speed, type,
+ udev->bus->controller->driver->name, udev->devnum);
/* Set up TT records, if needed */
if (hdev->tt) {
* down tremendously by NAKing the unexpectedly
* early status stage. Also, retry on all errors;
* some devices are flakey.
+ * 255 is for WUSB devices, we actually need to use 512.
+ * WUSB1.0[4.8.1].
*/
for (j = 0; j < 3; ++j) {
buf->bMaxPacketSize0 = 0;
buf, GET_DESCRIPTOR_BUFSIZE,
(i ? USB_CTRL_GET_TIMEOUT : 1000));
switch (buf->bMaxPacketSize0) {
- case 8: case 16: case 32: case 64:
+ case 8: case 16: case 32: case 64: case 255:
if (buf->bDescriptorType ==
USB_DT_DEVICE) {
r = 0;
if (retval)
goto fail;
- i = udev->descriptor.bMaxPacketSize0;
+ i = udev->descriptor.bMaxPacketSize0 == 0xff?
+ 512 : udev->descriptor.bMaxPacketSize0;
if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
if (udev->speed != USB_SPEED_FULL ||
!(i == 8 || i == 16 || i == 32 || i == 64)) {
usb_set_device_state(udev, USB_STATE_POWERED);
udev->speed = USB_SPEED_UNKNOWN;
udev->bus_mA = hub->mA_per_port;
+ udev->level = hdev->level + 1;
/* set the address */
choose_address(udev);
* stub "device" node was never suspended.
*/
if (i)
- usb_resume_both(hdev);
+ usb_autoresume_device(hdev, 0);
/* If this is an inactive or suspended hub, do nothing */
if (hub->quiescing)
/* If this is a root hub, tell the HCD it's okay to
* re-enable port-change interrupts now. */
- if (!hdev->parent)
+ if (!hdev->parent && !hub->busy_bits[0])
usb_enable_root_hub_irq(hdev->bus);
loop:
break;
}
clear_bit(port1, parent_hub->busy_bits);
+ if (!parent_hdev->parent && !parent_hub->busy_bits[0])
+ usb_enable_root_hub_irq(parent_hdev->bus);
+
if (ret < 0)
goto re_enumerate;
return -EINVAL;
}
+ /* Prevent autosuspend during the reset */
+ usb_autoresume_device(udev, 1);
+
if (iface && iface->condition != USB_INTERFACE_BINDING)
iface = NULL;
}
}
+ usb_autosuspend_device(udev, 1);
return ret;
}
EXPORT_SYMBOL(usb_reset_composite_device);