__le32 element; /* Queue element (TD) pointer */
/* Software fields */
+ dma_addr_t dma_handle;
+
struct list_head node; /* Node in the list of QHs */
struct usb_host_endpoint *hep; /* Endpoint information */
struct usb_device *udev;
struct list_head queue; /* Queue of urbps for this QH */
- struct uhci_qh *skel; /* Skeleton for this QH */
struct uhci_td *dummy_td; /* Dummy TD to end the queue */
struct uhci_td *post_td; /* Last TD completed */
int state; /* QH_STATE_xxx; see above */
int type; /* Queue type (control, bulk, etc) */
-
- dma_addr_t dma_handle;
+ int skel; /* Skeleton queue number */
unsigned int initial_toggle:1; /* Endpoint's current toggle value */
unsigned int needs_fixup:1; /* Must fix the TD toggle values */
return element;
}
+#define LINK_TO_QH(qh) (UHCI_PTR_QH | cpu_to_le32((qh)->dma_handle))
+
/*
* Transfer Descriptors
return le32_to_cpu(status);
}
+#define LINK_TO_TD(td) (cpu_to_le32((td)->dma_handle))
+
/*
* Skeleton Queue Headers
/*
* The UHCI driver uses QHs with Interrupt, Control and Bulk URBs for
* automatic queuing. To make it easy to insert entries into the schedule,
- * we have a skeleton of QHs for each predefined Interrupt latency,
- * low-speed control, full-speed control, bulk, and terminating QH
- * (see explanation for the terminating QH below).
+ * we have a skeleton of QHs for each predefined Interrupt latency.
+ * Asynchronous QHs (low-speed control, full-speed control, and bulk)
+ * go onto the period-1 interrupt list, since they all get accessed on
+ * every frame.
*
- * When we want to add a new QH, we add it to the end of the list for the
- * skeleton QH. For instance, the schedule list can look like this:
+ * When we want to add a new QH, we add it to the list starting from the
+ * appropriate skeleton QH. For instance, the schedule can look like this:
*
* skel int128 QH
* dev 1 interrupt QH
* skel int64 QH
* skel int32 QH
* ...
- * skel int1 QH
- * skel low-speed control QH
- * dev 5 control QH
- * skel full-speed control QH
- * skel bulk QH
+ * skel int1 + async QH
+ * dev 5 low-speed control QH
* dev 1 bulk QH
* dev 2 bulk QH
- * skel terminating QH
*
- * The terminating QH is used for 2 reasons:
- * - To place a terminating TD which is used to workaround a PIIX bug
- * (see Intel errata for explanation), and
- * - To loop back to the full-speed control queue for full-speed bandwidth
- * reclamation.
+ * There is a special terminating QH used to keep full-speed bandwidth
+ * reclamation active when no full-speed control or bulk QHs are linked
+ * into the schedule. It has an inactive TD (to work around a PIIX bug,
+ * see the Intel errata) and it points back to itself.
*
- * There's a special skeleton QH for Isochronous QHs. It never appears
- * on the schedule, and Isochronous TDs go on the schedule before the
+ * There's a special skeleton QH for Isochronous QHs which never appears
+ * on the schedule. Isochronous TDs go on the schedule before the
* the skeleton QHs. The hardware accesses them directly rather than
* through their QH, which is used only for bookkeeping purposes.
* While the UHCI spec doesn't forbid the use of QHs for Isochronous,
* it doesn't use them either. And the spec says that queues never
* advance on an error completion status, which makes them totally
* unsuitable for Isochronous transfers.
+ *
+ * There's also a special skeleton QH used for QHs which are in the process
+ * of unlinking and so may still be in use by the hardware. It too never
+ * appears on the schedule.
*/
-#define UHCI_NUM_SKELQH 14
-#define skel_unlink_qh skelqh[0]
-#define skel_iso_qh skelqh[1]
-#define skel_int128_qh skelqh[2]
-#define skel_int64_qh skelqh[3]
-#define skel_int32_qh skelqh[4]
-#define skel_int16_qh skelqh[5]
-#define skel_int8_qh skelqh[6]
-#define skel_int4_qh skelqh[7]
-#define skel_int2_qh skelqh[8]
-#define skel_int1_qh skelqh[9]
-#define skel_ls_control_qh skelqh[10]
-#define skel_fs_control_qh skelqh[11]
-#define skel_bulk_qh skelqh[12]
-#define skel_term_qh skelqh[13]
-
-/* Find the skelqh entry corresponding to an interval exponent */
-#define UHCI_SKEL_INDEX(exponent) (9 - exponent)
-
+#define UHCI_NUM_SKELQH 11
+#define SKEL_UNLINK 0
+#define skel_unlink_qh skelqh[SKEL_UNLINK]
+#define SKEL_ISO 1
+#define skel_iso_qh skelqh[SKEL_ISO]
+ /* int128, int64, ..., int1 = 2, 3, ..., 9 */
+#define SKEL_INDEX(exponent) (9 - exponent)
+#define SKEL_ASYNC 9
+#define skel_async_qh skelqh[SKEL_ASYNC]
+#define SKEL_TERM 10
+#define skel_term_qh skelqh[SKEL_TERM]
+
+/* The following entries refer to sublists of skel_async_qh */
+#define SKEL_LS_CONTROL 20
+#define SKEL_FS_CONTROL 21
+#define SKEL_FSBR SKEL_FS_CONTROL
+#define SKEL_BULK 22
/*
* The UHCI controller and root hub
projects / powerpc.git / blobdiff