#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>
#include <linux/sched.h>
#include <asm/uaccess.h>
#include <asm/unaligned.h>
};
struct aiptek {
- struct input_dev inputdev; /* input device struct */
+ struct input_dev *inputdev; /* input device struct */
struct usb_device *usbdev; /* usb device struct */
struct urb *urb; /* urb for incoming reports */
dma_addr_t data_dma; /* our dma stuffage */
* the bitmap which comes from the tablet. This hides the
* issue that the F_keys are not sequentially numbered.
*/
-static int macroKeyEvents[] = {
+static const int macroKeyEvents[] = {
KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5,
KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11,
KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17,
{
struct aiptek *aiptek = urb->context;
unsigned char *data = aiptek->data;
- struct input_dev *inputdev = &aiptek->inputdev;
+ struct input_dev *inputdev = aiptek->inputdev;
int jitterable = 0;
int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
/* Query getXextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
return ret;
- aiptek->inputdev.absmin[ABS_X] = 0;
- aiptek->inputdev.absmax[ABS_X] = ret - 1;
+ aiptek->inputdev->absmin[ABS_X] = 0;
+ aiptek->inputdev->absmax[ABS_X] = ret - 1;
/* Query getYextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
return ret;
- aiptek->inputdev.absmin[ABS_Y] = 0;
- aiptek->inputdev.absmax[ABS_Y] = ret - 1;
+ aiptek->inputdev->absmin[ABS_Y] = 0;
+ aiptek->inputdev->absmax[ABS_Y] = ret - 1;
/* Query getPressureLevels */
if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
return ret;
- aiptek->inputdev.absmin[ABS_PRESSURE] = 0;
- aiptek->inputdev.absmax[ABS_PRESSURE] = ret - 1;
+ aiptek->inputdev->absmin[ABS_PRESSURE] = 0;
+ aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1;
/* Depending on whether we are in absolute or relative mode, we will
* do a switchToTablet(absolute) or switchToMouse(relative) command.
return 0;
return snprintf(buf, PAGE_SIZE, "%dx%d\n",
- aiptek->inputdev.absmax[ABS_X] + 1,
- aiptek->inputdev.absmax[ABS_Y] + 1);
+ aiptek->inputdev->absmax[ABS_X] + 1,
+ aiptek->inputdev->absmax[ABS_Y] + 1);
}
/* These structs define the sysfs files, param #1 is the name of the
return 0;
return snprintf(buf, PAGE_SIZE, "0x%04x\n",
- aiptek->inputdev.id.product);
+ aiptek->inputdev->id.product);
}
static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL);
if (aiptek == NULL)
return 0;
- return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev.id.vendor);
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor);
}
static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL);
struct input_dev *inputdev;
struct input_handle *inputhandle;
struct list_head *node, *next;
- char path[64 + 1];
int i;
int speeds[] = { 0,
AIPTEK_PROGRAMMABLE_DELAY_50,
*/
speeds[0] = programmableDelay;
- if ((aiptek = kmalloc(sizeof(struct aiptek), GFP_KERNEL)) == NULL)
- return -ENOMEM;
- memset(aiptek, 0, sizeof(struct aiptek));
+ aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL);
+ inputdev = input_allocate_device();
+ if (!aiptek || !inputdev)
+ goto fail1;
aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH,
SLAB_ATOMIC, &aiptek->data_dma);
- if (aiptek->data == NULL) {
- kfree(aiptek);
- return -ENOMEM;
- }
+ if (!aiptek->data)
+ goto fail1;
aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (aiptek->urb == NULL) {
- usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
- aiptek->data_dma);
- kfree(aiptek);
- return -ENOMEM;
- }
+ if (!aiptek->urb)
+ goto fail2;
+
+ aiptek->inputdev = inputdev;
+ aiptek->usbdev = usbdev;
+ aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
+ aiptek->inDelay = 0;
+ aiptek->endDelay = 0;
+ aiptek->previousJitterable = 0;
/* Set up the curSettings struct. Said struct contains the current
* programmable parameters. The newSetting struct contains changes
/* Both structs should have equivalent settings
*/
- memcpy(&aiptek->newSetting, &aiptek->curSetting,
- sizeof(struct aiptek_settings));
+ aiptek->newSetting = aiptek->curSetting;
+
+ /* Determine the usb devices' physical path.
+ * Asketh not why we always pretend we're using "../input0",
+ * but I suspect this will have to be refactored one
+ * day if a single USB device can be a keyboard & a mouse
+ * & a tablet, and the inputX number actually will tell
+ * us something...
+ */
+ usb_make_path(usbdev, aiptek->features.usbPath,
+ sizeof(aiptek->features.usbPath));
+ strlcat(aiptek->features.usbPath, "/input0",
+ sizeof(aiptek->features.usbPath));
+
+ /* Set up client data, pointers to open and close routines
+ * for the input device.
+ */
+ inputdev->name = "Aiptek";
+ inputdev->phys = aiptek->features.usbPath;
+ usb_to_input_id(usbdev, &inputdev->id);
+ inputdev->cdev.dev = &intf->dev;
+ inputdev->private = aiptek;
+ inputdev->open = aiptek_open;
+ inputdev->close = aiptek_close;
/* Now program the capacities of the tablet, in terms of being
* an input device.
*/
- aiptek->inputdev.evbit[0] |= BIT(EV_KEY)
+ inputdev->evbit[0] |= BIT(EV_KEY)
| BIT(EV_ABS)
| BIT(EV_REL)
| BIT(EV_MSC);
- aiptek->inputdev.absbit[0] |=
- (BIT(ABS_X) |
- BIT(ABS_Y) |
- BIT(ABS_PRESSURE) |
- BIT(ABS_TILT_X) |
- BIT(ABS_TILT_Y) | BIT(ABS_WHEEL) | BIT(ABS_MISC));
+ inputdev->absbit[0] |= BIT(ABS_MISC);
- aiptek->inputdev.relbit[0] |=
+ inputdev->relbit[0] |=
(BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC));
- aiptek->inputdev.keybit[LONG(BTN_LEFT)] |=
+ inputdev->keybit[LONG(BTN_LEFT)] |=
(BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE));
- aiptek->inputdev.keybit[LONG(BTN_DIGI)] |=
+ inputdev->keybit[LONG(BTN_DIGI)] |=
(BIT(BTN_TOOL_PEN) |
BIT(BTN_TOOL_RUBBER) |
BIT(BTN_TOOL_PENCIL) |
BIT(BTN_TOOL_LENS) |
BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2));
- aiptek->inputdev.mscbit[0] = BIT(MSC_SERIAL);
+ inputdev->mscbit[0] = BIT(MSC_SERIAL);
/* Programming the tablet macro keys needs to be done with a for loop
* as the keycodes are discontiguous.
*/
- for (i = 0; i < sizeof(macroKeyEvents) / sizeof(macroKeyEvents[0]); ++i)
- set_bit(macroKeyEvents[i], aiptek->inputdev.keybit);
-
- /* Set up client data, pointers to open and close routines
- * for the input device.
- */
- aiptek->inputdev.private = aiptek;
- aiptek->inputdev.open = aiptek_open;
- aiptek->inputdev.close = aiptek_close;
+ for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i)
+ set_bit(macroKeyEvents[i], inputdev->keybit);
- /* Determine the usb devices' physical path.
- * Asketh not why we always pretend we're using "../input0",
- * but I suspect this will have to be refactored one
- * day if a single USB device can be a keyboard & a mouse
- * & a tablet, and the inputX number actually will tell
- * us something...
- */
- if (usb_make_path(usbdev, path, 64) > 0)
- sprintf(aiptek->features.usbPath, "%s/input0", path);
-
- /* Program the input device coordinate capacities. We do not yet
+ /*
+ * Program the input device coordinate capacities. We do not yet
* know what maximum X, Y, and Z values are, so we're putting fake
* values in. Later, we'll ask the tablet to put in the correct
* values.
*/
- aiptek->inputdev.absmin[ABS_X] = 0;
- aiptek->inputdev.absmax[ABS_X] = 2999;
- aiptek->inputdev.absmin[ABS_Y] = 0;
- aiptek->inputdev.absmax[ABS_Y] = 2249;
- aiptek->inputdev.absmin[ABS_PRESSURE] = 0;
- aiptek->inputdev.absmax[ABS_PRESSURE] = 511;
- aiptek->inputdev.absmin[ABS_TILT_X] = AIPTEK_TILT_MIN;
- aiptek->inputdev.absmax[ABS_TILT_X] = AIPTEK_TILT_MAX;
- aiptek->inputdev.absmin[ABS_TILT_Y] = AIPTEK_TILT_MIN;
- aiptek->inputdev.absmax[ABS_TILT_Y] = AIPTEK_TILT_MAX;
- aiptek->inputdev.absmin[ABS_WHEEL] = AIPTEK_WHEEL_MIN;
- aiptek->inputdev.absmax[ABS_WHEEL] = AIPTEK_WHEEL_MAX - 1;
- aiptek->inputdev.absfuzz[ABS_X] = 0;
- aiptek->inputdev.absfuzz[ABS_Y] = 0;
- aiptek->inputdev.absfuzz[ABS_PRESSURE] = 0;
- aiptek->inputdev.absfuzz[ABS_TILT_X] = 0;
- aiptek->inputdev.absfuzz[ABS_TILT_Y] = 0;
- aiptek->inputdev.absfuzz[ABS_WHEEL] = 0;
- aiptek->inputdev.absflat[ABS_X] = 0;
- aiptek->inputdev.absflat[ABS_Y] = 0;
- aiptek->inputdev.absflat[ABS_PRESSURE] = 0;
- aiptek->inputdev.absflat[ABS_TILT_X] = 0;
- aiptek->inputdev.absflat[ABS_TILT_Y] = 0;
- aiptek->inputdev.absflat[ABS_WHEEL] = 0;
- aiptek->inputdev.name = "Aiptek";
- aiptek->inputdev.phys = aiptek->features.usbPath;
- aiptek->inputdev.id.bustype = BUS_USB;
- aiptek->inputdev.id.vendor = le16_to_cpu(usbdev->descriptor.idVendor);
- aiptek->inputdev.id.product = le16_to_cpu(usbdev->descriptor.idProduct);
- aiptek->inputdev.id.version = le16_to_cpu(usbdev->descriptor.bcdDevice);
- aiptek->inputdev.dev = &intf->dev;
-
- aiptek->usbdev = usbdev;
- aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
- aiptek->inDelay = 0;
- aiptek->endDelay = 0;
- aiptek->previousJitterable = 0;
+ input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0);
+ input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0);
+ input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+ input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
endpoint = &intf->altsetting[0].endpoint[0].desc;
aiptek->urb->transfer_dma = aiptek->data_dma;
aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- /* Register the tablet as an Input Device
- */
- input_register_device(&aiptek->inputdev);
-
- /* We now will look for the evdev device which is mapped to
- * the tablet. The partial name is kept in the link list of
- * input_handles associated with this input device.
- * What identifies an evdev input_handler is that it begins
- * with 'event', continues with a digit, and that in turn
- * is mapped to /{devfs}/input/eventN.
- */
- inputdev = &aiptek->inputdev;
- list_for_each_safe(node, next, &inputdev->h_list) {
- inputhandle = to_handle(node);
- if (strncmp(inputhandle->name, "event", 5) == 0) {
- strcpy(aiptek->features.inputPath, inputhandle->name);
- break;
- }
- }
-
- info("input: Aiptek on %s (%s)\n", path, aiptek->features.inputPath);
-
/* Program the tablet. This sets the tablet up in the mode
* specified in newSetting, and also queries the tablet's
* physical capacities.
* not an error :-)
*/
- for (i = 0; i < sizeof(speeds) / sizeof(speeds[0]); ++i) {
+ for (i = 0; i < ARRAY_SIZE(speeds); ++i) {
aiptek->curSetting.programmableDelay = speeds[i];
(void)aiptek_program_tablet(aiptek);
- if (aiptek->inputdev.absmax[ABS_X] > 0) {
+ if (aiptek->inputdev->absmax[ABS_X] > 0) {
info("input: Aiptek using %d ms programming speed\n",
aiptek->curSetting.programmableDelay);
break;
}
}
+ /* Register the tablet as an Input Device
+ */
+ input_register_device(aiptek->inputdev);
+
+ /* We now will look for the evdev device which is mapped to
+ * the tablet. The partial name is kept in the link list of
+ * input_handles associated with this input device.
+ * What identifies an evdev input_handler is that it begins
+ * with 'event', continues with a digit, and that in turn
+ * is mapped to input/eventN.
+ */
+ list_for_each_safe(node, next, &inputdev->h_list) {
+ inputhandle = to_handle(node);
+ if (strncmp(inputhandle->name, "event", 5) == 0) {
+ strcpy(aiptek->features.inputPath, inputhandle->name);
+ break;
+ }
+ }
+
/* Associate this driver's struct with the usb interface.
*/
usb_set_intfdata(intf, aiptek);
info("aiptek: error loading 'evdev' module");
return 0;
+
+fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
+ aiptek->data_dma);
+fail1: input_free_device(inputdev);
+ kfree(aiptek);
+ return -ENOMEM;
}
/* Forward declaration */
static void aiptek_disconnect(struct usb_interface *intf);
static struct usb_driver aiptek_driver = {
- .owner = THIS_MODULE,
.name = "aiptek",
.probe = aiptek_probe,
.disconnect = aiptek_disconnect,
/* Free & unhook everything from the system.
*/
usb_kill_urb(aiptek->urb);
- input_unregister_device(&aiptek->inputdev);
+ input_unregister_device(aiptek->inputdev);
aiptek_delete_files(&intf->dev);
usb_free_urb(aiptek->urb);
usb_buffer_free(interface_to_usbdev(intf),
projects / powerpc.git / blobdiff