fbdev: hecuba Framebuffer Driver

[powerpc.git] / drivers / video / Kconfig

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0a614be..0aeab4e 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -5,6 +5,7 @@
 menu "Graphics support"
 
 source "drivers/video/backlight/Kconfig"
+source "drivers/video/display/Kconfig"
 
 config FB
        tristate "Support for frame buffer devices"
@@ -90,6 +91,11 @@ config FB_CFB_IMAGEBLIT
          blitting. This is used by drivers that don't provide their own
          (accelerated) version.
 
+config FB_DEFERRED_IO
+       bool
+       depends on FB
+       default y
+
 config FB_SVGALIB
        tristate
        depends on FB
@@ -551,6 +557,20 @@ config FB_IMAC
        help
          This is the frame buffer device driver for the Intel-based Macintosh
 
+config FB_HECUBA
+       tristate "Hecuba board support"
+       depends on FB && X86 && MMU
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       select FB_DEFERRED_IO
+       help
+         This enables support for the Hecuba board. This driver was tested
+         with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
+         interface (8 bit data, 4 bit control). If you anticpate using
+         this driver, say Y or M; otherwise say N. You must specify the
+         GPIO IO address to be used for setting control and data.
+
 config FB_HGA
        tristate "Hercules mono graphics support"
        depends on FB && X86
@@ -1396,6 +1416,19 @@ config FB_XVR500
          mostly initialized the card already.  It is treated as a
          completely dumb framebuffer device.
 
+config FB_XVR2500
+       bool "Sun XVR-2500 3DLABS Wildcat support"
+       depends on FB && PCI && SPARC64
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       help
+         This is the framebuffer device for the Sun XVR-2500 and similar
+         graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+         only works on sparc64 systems where the system firwmare has
+         mostly initialized the card already.  It is treated as a
+         completely dumb framebuffer device.
+
 config FB_PCI
        bool "PCI framebuffers"
        depends on (FB = y) && PCI && SPARC