fbdev: hecuba Framebuffer Driver

[powerpc.git] / drivers / video / Kconfig

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e4f0dd0..0aeab4e 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -5,6 +5,7 @@
 menu "Graphics support"
 
 source "drivers/video/backlight/Kconfig"
+source "drivers/video/display/Kconfig"
 
 config FB
        tristate "Support for frame buffer devices"
@@ -90,6 +91,11 @@ config FB_CFB_IMAGEBLIT
          blitting. This is used by drivers that don't provide their own
          (accelerated) version.
 
+config FB_DEFERRED_IO
+       bool
+       depends on FB
+       default y
+
 config FB_SVGALIB
        tristate
        depends on FB
@@ -139,7 +145,7 @@ config FB_TILEBLITTING
         This is particularly important to one driver, matroxfb.  If
         unsure, say N.
 
-comment "Frambuffer hardware drivers"
+comment "Frame buffer hardware drivers"
        depends on FB
 
 config FB_CIRRUS
@@ -191,7 +197,7 @@ config FB_ARMCLCD
 
          If you want to compile this as a module (=code which can be
          inserted into and removed from the running kernel), say M
-         here and read <file:Documentation/modules.txt>.  The module
+         here and read <file:Documentation/kbuild/modules.txt>.  The module
          will be called amba-clcd.
 
 choice
@@ -389,14 +395,17 @@ config FB_ARC
 
 config FB_ATARI
        bool "Atari native chipset support"
-       depends on (FB = y) && ATARI && BROKEN
+       depends on (FB = y) && ATARI
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
        help
          This is the frame buffer device driver for the builtin graphics
          chipset found in Ataris.
 
 config FB_OF
        bool "Open Firmware frame buffer device support"
-       depends on (FB = y) && (PPC64 || PPC_OF)
+       depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
@@ -548,6 +557,20 @@ config FB_IMAC
        help
          This is the frame buffer device driver for the Intel-based Macintosh
 
+config FB_HECUBA
+       tristate "Hecuba board support"
+       depends on FB && X86 && MMU
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       select FB_DEFERRED_IO
+       help
+         This enables support for the Hecuba board. This driver was tested
+         with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
+         interface (8 bit data, 4 bit control). If you anticpate using
+         this driver, say Y or M; otherwise say N. You must specify the
+         GPIO IO address to be used for setting control and data.
+
 config FB_HGA
        tristate "Hercules mono graphics support"
        depends on FB && X86
@@ -1380,6 +1403,32 @@ config FB_LEO
          This is the frame buffer device driver for the SBUS-based Sun ZX
          (leo) frame buffer cards.
 
+config FB_XVR500
+       bool "Sun XVR-500 3DLABS Wildcat support"
+       depends on FB && PCI && SPARC64
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       help
+         This is the framebuffer device for the Sun XVR-500 and similar
+         graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+         only works on sparc64 systems where the system firwmare has
+         mostly initialized the card already.  It is treated as a
+         completely dumb framebuffer device.
+
+config FB_XVR2500
+       bool "Sun XVR-2500 3DLABS Wildcat support"
+       depends on FB && PCI && SPARC64
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       help
+         This is the framebuffer device for the Sun XVR-2500 and similar
+         graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+         only works on sparc64 systems where the system firwmare has
+         mostly initialized the card already.  It is treated as a
+         completely dumb framebuffer device.
+
 config FB_PCI
        bool "PCI framebuffers"
        depends on (FB = y) && PCI && SPARC
@@ -1491,7 +1540,7 @@ config FB_PXA
          This driver is also available as a module ( = code which can be
          inserted and removed from the running kernel whenever you want). The
          module will be called pxafb. If you want to compile it as a module,
-         say M here and read <file:Documentation/modules.txt>.
+         say M here and read <file:Documentation/kbuild/modules.txt>.
 
          If unsure, say N.
 
@@ -1544,7 +1593,7 @@ config FB_W100
          This driver is also available as a module ( = code which can be
          inserted and removed from the running kernel whenever you want). The
          module will be called w100fb. If you want to compile it as a module,
-         say M here and read <file:Documentation/modules.txt>.
+         say M here and read <file:Documentation/kbuild/modules.txt>.
 
          If unsure, say N.
 
@@ -1561,7 +1610,7 @@ config FB_S3C2410
          This driver is also available as a module ( = code which can be
          inserted and removed from the running kernel whenever you want). The
          module will be called s3c2410fb. If you want to compile it as a module,
-         say M here and read <file:Documentation/modules.txt>.
+         say M here and read <file:Documentation/kbuild/modules.txt>.
 
          If unsure, say N.
 config FB_S3C2410_DEBUG