menu "Graphics support"
+config FIRMWARE_EDID
+ bool "Enable firmware EDID"
+ default y
+ ---help---
+ This enables access to the EDID transferred from the firmware.
+ On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+ transfers do not work for your driver and if you are using
+ nvidiafb, i810fb or savagefb.
+
+ In general, choosing Y for this option is safe. If you
+ experience extremely long delays while booting before you get
+ something on your display, try setting this to N. Matrox cards in
+ combination with certain motherboards and monitors are known to
+ suffer from this problem.
+
config FB
tristate "Support for frame buffer devices"
---help---
depends on FB
default n
+config FB_BACKLIGHT
+ bool
+ depends on FB
+ default n
+
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
depends on FB
here and read <file:Documentation/modules.txt>. The module
will be called amba-clcd.
+choice
+
+ depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
+ prompt "LCD Panel"
+ default FB_ARMCLCD_SHARP_LQ035Q7DB02
+
+config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
+ bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
+ help
+ This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
+ color QVGA, HRTFT panel. The LogicPD device includes an
+ an integrated HRTFT controller IC.
+ The native resolution is 240x320.
+
+config FB_ARMCLCD_SHARP_LQ057Q3DC02
+ bool "LogicPD LCD 5.7\" QVGA"
+ help
+ This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
+ color QVGA, TFT panel. The LogicPD device includes an
+ The native resolution is 320x240.
+
+config FB_ARMCLCD_SHARP_LQ64D343
+ bool "LogicPD LCD 6.4\" VGA"
+ help
+ This is an implementation of the Sharp LQ64D343, a 6.4"
+ color VGA, TFT panel. The LogicPD device includes an
+ The native resolution is 640x480.
+
+config FB_ARMCLCD_SHARP_LQ10D368
+ bool "LogicPD LCD 10.4\" VGA"
+ help
+ This is an implementation of the Sharp LQ10D368, a 10.4"
+ color VGA, TFT panel. The LogicPD device includes an
+ The native resolution is 640x480.
+
+
+config FB_ARMCLCD_SHARP_LQ121S1DG41
+ bool "LogicPD LCD 12.1\" SVGA"
+ help
+ This is an implementation of the Sharp LQ121S1DG41, a 12.1"
+ color SVGA, TFT panel. The LogicPD device includes an
+ The native resolution is 800x600.
+
+ This panel requires a clock rate may be an integer fraction
+ of the base LCDCLK frequency. The driver will select the
+ highest frequency available that is lower than the maximum
+ allowed. The panel may flicker if the clock rate is
+ slower than the recommended minimum.
+
+config FB_ARMCLCD_AUO_A070VW01_WIDE
+ bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
+ help
+ This is an implementation of the AU Optronics, a 7.0"
+ WIDE Color. The native resolution is 234x480.
+
+config FB_ARMCLCD_HITACHI
+ bool "Hitachi Wide Screen 800x480"
+ help
+ This is an implementation of the Hitachi 800x480.
+
+endchoice
+
+
config FB_ACORN
bool "Acorn VIDC support"
depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
config FB_CONTROL
bool "Apple \"control\" display support"
- depends on (FB = y) && PPC_PMAC
+ depends on (FB = y) && PPC_PMAC && PPC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_PLATINUM
bool "Apple \"platinum\" display support"
- depends on (FB = y) && PPC_PMAC
+ depends on (FB = y) && PPC_PMAC && PPC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_VALKYRIE
bool "Apple \"valkyrie\" display support"
- depends on (FB = y) && (MAC || PPC_PMAC)
+ depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CT65550
bool "Chips 65550 display support"
- depends on (FB = y) && PPC
+ depends on (FB = y) && PPC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Asiliant 69030 chipset
config FB_IMSTT
bool "IMS Twin Turbo display support"
You will get a boot time penguin logo at no additional cost. Please
read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
-config VIDEO_SELECT
- bool
- depends on FB_VESA
- default y
+config FB_IMAC
+ bool "Intel-based Macintosh Framebuffer Support"
+ depends on (FB = y) && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Intel-based Macintosh
config FB_HGA
tristate "Hercules mono graphics support"
This will compile the Hercules mono graphics with
acceleration functions.
-
-config VIDEO_SELECT
- bool
- depends on (FB = y) && X86
- default y
-
config FB_SGIVW
tristate "SGI Visual Workstation framebuffer support"
depends on FB && X86_VISWS
config FB_GBE_MEM
int "Video memory size in MB"
depends on FB_GBE
- default 8
+ default 4
help
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
-config BUS_I2C
- bool
- depends on (FB = y) && VISWS
- default y
-
config FB_SUN3
bool "Sun3 framebuffer support"
depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
+config FB_SBUS
+ bool "SBUS and UPA framebuffers"
+ depends on (FB = y) && SPARC
+ help
+ Say Y if you want support for SBUS or UPA based frame buffer device.
+
config FB_BW2
bool "BWtwo support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CG3
bool "CGthree support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
config FB_CG6
bool "CGsix (GX,TurboGX) support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
independently validate video mode parameters, you should say Y
here.
+config FB_NVIDIA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_NVIDIA && PPC_PMAC
+ select FB_BACKLIGHT
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
of debugging informations to provide to the maintainer when
something goes wrong.
+config FB_RIVA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RIVA && PPC_PMAC
+ select FB_BACKLIGHT
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86_32
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86_32
+ depends on FB && EXPERIMENTAL && PCI && X86
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
There is no need for enabling 'Matrox multihead support' if you have
only one Matrox card in the box.
-config FB_RADEON_OLD
- tristate "ATI Radeon display support (Old driver)"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MACMODES if PPC
- help
- Choose this option if you want to use an ATI Radeon graphics card as
- a framebuffer device. There are both PCI and AGP versions. You
- don't need to choose this to run the Radeon in plain VGA mode.
- There is a product page at
- <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
-
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
There is a product page at
http://apps.ati.com/ATIcompare/
+
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
depends on FB_RADEON
help
Say Y here if you want DDC/I2C support for your Radeon board.
+config FB_RADEON_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RADEON && PPC_PMAC
+ select FB_BACKLIGHT
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_RADEON_DEBUG
bool "Lots of debug output from Radeon driver"
depends on FB_RADEON
To compile this driver as a module, choose M here: the
module will be called aty128fb.
+config FB_ATY128_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY128 && PPC_PMAC
+ select FB_BACKLIGHT
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_ATY
tristate "ATI Mach64 display support" if PCI || ATARI
- depends on FB
+ depends on FB && !SPARC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
Rage XC, or Rage XL chipset.
-config FB_ATY_XL_INIT
- bool "Rage XL No-BIOS Init support"
- depends on FB_ATY_CT
- help
- Say Y here to support booting a Rage XL without BIOS support.
-
config FB_ATY_GX
bool "Mach64 GX support" if PCI
depends on FB_ATY
is at
<http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+config FB_ATY_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY && PPC_PMAC
+ select FB_BACKLIGHT
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_S3TRIO
bool "S3 Trio display support"
depends on (FB = y) && PPC && BROKEN
config FB_CYBLA
tristate "Cyberblade/i1 support"
- depends on FB && PCI
+ depends on FB && PCI && X86_32 && !64BIT
select FB_CFB_IMAGEBLIT
select VIDEO_SELECT
---help---
bool "Au1100 LCD Driver"
depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
-source "drivers/video/geode/Kconfig"
-
-config FB_SBUS
- bool "SBUS and UPA framebuffers"
- depends on (FB = y) && (SPARC32 || SPARC64)
+config FB_AU1200
+ bool "Au1200 LCD Driver"
+ depends on FB && MIPS && SOC_AU1200
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
- Say Y if you want support for SBUS or UPA based frame buffer device.
+ This is the framebuffer driver for the AMD Au1200 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1200fb:panel=<name>.
+
+source "drivers/video/geode/Kconfig"
config FB_FFB
bool "Creator/Creator3D/Elite3D support"
config FB_PCI
bool "PCI framebuffers"
- depends on (FB = y) && PCI && (SPARC64 || SPARC32)
+ depends on (FB = y) && PCI && SPARC
config FB_IGA
bool "IGA 168x display support"
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
- module will be called vfb. If you want to compile it as a module,
+ module will be called pxafb. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
<file:Documentation/fb/pxafb.txt> describes the available parameters.
+config FB_MBX
+ tristate "2700G LCD framebuffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the Intel 2700G (Marathon) Graphics
+ Accelerator
+
+config FB_MBX_DEBUG
+ bool "Enable debugging info via debugfs"
+ depends on FB_MBX && DEBUG_FS
+ default n
+ ---help---
+ Enable this if you want debugging information using the debug
+ filesystem (debugfs)
+
+ If unsure, say N.
+
config FB_W100
tristate "W100 frame buffer support"
depends on FB && PXA_SHARPSL
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
- module will be called vfb. If you want to compile it as a module,
+ module will be called w100fb. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
+config FB_PNX4008_DUM
+ tristate "Display Update Module support on Philips PNX4008 board"
+ depends on FB && ARCH_PNX4008
+ ---help---
+ Say Y here to enable support for PNX4008 Display Update Module (DUM)
+
+config FB_PNX4008_DUM_RGB
+ tristate "RGB Framebuffer support on Philips PNX4008 board"
+ depends on FB_PNX4008_DUM
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here to enable support for PNX4008 RGB Framebuffer
+
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB