menu "Graphics support"
depends on HAS_IOMEM
-source "drivers/video/backlight/Kconfig"
-source "drivers/video/display/Kconfig"
+source "drivers/char/agp/Kconfig"
+
+source "drivers/char/drm/Kconfig"
config VGASTATE
tristate
default n
-config FB
+config VIDEO_OUTPUT_CONTROL
+ tristate "Lowlevel video output switch controls"
+ help
+ This framework adds support for low-level control of the video
+ output switch.
+
+menuconfig FB
tristate "Support for frame buffer devices"
---help---
The frame buffer device provides an abstraction for the graphics
blitting. This is used by drivers that don't provide their own
(accelerated) version.
+config FB_CFB_REV_PIXELS_IN_BYTE
+ bool
+ depends on FB
+ default n
+ ---help---
+ Allow generic frame-buffer functions to work on displays with 1, 2
+ and 4 bits per pixel depths which has opposite order of pixels in
+ byte order to bytes in long order.
+
config FB_SYS_FILLRECT
tristate
depends on FB
To compile this driver as a module, choose M here: the
module will be called vga16fb.
+config FB_BF54X_LQ043
+ tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
+ depends on FB && (BF54x)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+
config FB_STI
tristate "HP STI frame buffer device support"
depends on FB && PARISC
Say Y if you have one of those.
+config FB_UVESA
+ tristate "Userspace VESA VGA graphics support"
+ depends on FB && CONNECTOR
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ help
+ This is the frame buffer driver for generic VBE 2.0 compliant
+ graphic cards. It can also take advantage of VBE 3.0 features,
+ such as refresh rate adjustment.
+
+ This driver generally provides more features than vesafb but
+ requires a userspace helper application called 'v86d'. See
+ <file:Documentation/fb/uvesafb.txt> for more information.
+
+ If unsure, say N.
+
config FB_VESA
bool "VESA VGA graphics support"
depends on (FB = y) && X86
help
This enables support for the Hecuba board. This driver was tested
with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 4 bit control). If you anticpate using
+ interface (8 bit data, 4 bit control). If you anticipate using
this driver, say Y or M; otherwise say N. You must specify the
GPIO IO address to be used for setting control and data.
help
This is the framebuffer device for the Sun XVR-500 and similar
graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
+ only works on sparc64 systems where the system firmware has
mostly initialized the card already. It is treated as a
completely dumb framebuffer device.
help
This is the framebuffer device for the Sun XVR-2500 and similar
graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
+ only works on sparc64 systems where the system firmware has
mostly initialized the card already. It is treated as a
completely dumb framebuffer device.
Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
to let frame buffer in external SDRAM.
+config FB_ATMEL_STN
+ bool "Use a STN display with AT91/AT32 LCD Controller"
+ depends on FB_ATMEL && MACH_AT91SAM9261EK
+ default n
+ help
+ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
+ Controller. Say N if you want to connect a TFT.
+
+ If unsure, say N.
+
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
config FB_AU1100
bool "Au1100 LCD Driver"
- depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
+ depends on (FB = y) && MIPS && SOC_AU1100
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer driver for the AMD Au1100 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1100fb:panel=<name>.
config FB_AU1200
bool "Au1200 LCD Driver"
config FB_PMAGB_B
tristate "PMAGB-B TURBOchannel framebuffer support"
- depends on TC
+ depends on FB && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
DECstation series (Personal DECstation 5000/20, /25, /33, /50,
Codename "Maxine").
-config FB_TX3912
- bool "TMPTX3912/PR31700 frame buffer support"
- depends on (FB = y) && NINO
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
-
- Say Y here to enable kernel support for the on-board framebuffer.
-
config FB_G364
bool "G364 frame buffer support"
depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
config FB_IBM_GXT4500
tristate "Framebuffer support for IBM GXT4500P adaptor"
- depends on PPC
+ depends on FB && PPC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_PS3_DEFAULT_SIZE_M
int "PS3 default frame buffer size (in MiB)"
depends on FB_PS3
- default 18
+ default 9
---help---
This is the default size (in MiB) of the virtual frame buffer in
the PS3.
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
-if ARCH_OMAP
- source "drivers/video/omap/Kconfig"
-endif
-
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
If unsure, say N.
+if ARCH_OMAP
+ source "drivers/video/omap/Kconfig"
+endif
+
+source "drivers/video/backlight/Kconfig"
+source "drivers/video/display/Kconfig"
+
if VT
source "drivers/video/console/Kconfig"
endif
endif
endmenu
-
projects / powerpc.git / blobdiff