+-include config.mk
+
+#platform?=goodfet
+#platform?=telosb
+#platform?=z1
+#platform?=nhbadge
+#platform?=nhbadgeb
+#platofrm?=arduino
+#platform?=tilaunchpad
+platform?=goodfet
+
+# donb
+ifeq ($(platform),donbfet)
+GCC?=avr-gcc
+mcu?=atmega644p
+CFLAGS=$(DEBUG) -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
+endif
+
+ifeq ($(platform),tilaunchpad)
+mcu?=msp430x1612
+CFLAGS+=-DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
+#CFLAGS+= -Werror
+endif
#include `uname`.mak
-GOODFET?=/dev/ttyUSB0
+GOODFET?=/dev/tty.usbser*
+#For Arduino,
+#BSL?=avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
#For tos-bsl, use --invert-reset --invert-test
-BSL?=goodfet.bsl --speed=38400
+MSP430BSL?=goodfet.bsl --speed=38400
+JTAG=msp430-jtag
#One of these should be defined explicitly.
#Default removed because of confusion.
-#mcu?=msp430x2274
#mcu?=msp430x2618
#mcu?=msp430x1612
+#mcu?=atmega168
mcu?=RUNCONFIG
-#platform=goodfet
-#platform=telosb
-#platform=z1
-#platform=nhbadge
-#platform=nhbadgeb
-platform?=goodfet
#N.B., gcc WILL NOT BITCH if this file doesn't exist.
-#GCCINC=-T ldscripts/161x.x
-GCCINC=-T ldscripts/$(mcu).x
+GCCINC?=
+
+#GCC?=avr-gcc
+# We use -Wl,-dT because gcc adds the msp430mcu definitions at the
+# very end of the command line, so they only have an effect for a
+# default linker script
+GCC?=msp430-gcc
+LDFLAGS?=-Wl,-dT ldscripts/$(mcu).x
-CCEXTRA?=
-CC=msp430-gcc -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu) -D$(mcu) -D$(platform) -Dplatform=$(platform) -DGCC $(GCCINC) -I include -I platforms $(CCEXTRA)
+CCEXTRA?= $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) $(GCCINC) -I include -I platforms
+CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu) $(CCEXTRA)
# Available Applications
# ======================
# Below is a list of available applications and their descriptions.
-# PRODUCTION:
+# PRODUCTION:
# None have made it to production grade quality
# BETA:
# config = monitor sbw chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
# New default.
-config ?= monitor chipcon ccspi nrf spi jtagarm7 jtag430 jtag430x2 avr openocd
+ifeq ($(platform),tilaunchpad)
+config ?= monitor chipcon i2c
+else
+config ?= monitor chipcon spi jtag430 jtag430x2 avr openocd ccspi
+endif
+
+# donb
+ifeq ($(platform),donbfet)
+config=monitor avr spi jscan
+endif
# Build the needed list of app and lib object files from the config
-apps=
-libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o
+apps=
+
+ifeq ($(platform),tilaunchpad)
+libs= lib/$(platform).o lib/command.o lib/apps.o lib/msp430_serial.o
+#libs+=lib/setjmp.o
+else
+libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o
+endif
+
hdrs=
ERR=
hdrs+= spi.h
endif
+# include twe app
+ifeq ($(filter twe, $(config)), twe)
+ apps+= apps/twe/twe.o
+ hdrs+= twe.h
+endif
+
# include base jtag if they specified it explicitly
ifeq ($(filter jtag, $(config)), jtag)
ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
hdrs+= ps2.h
endif
+# include jscan app
+ifeq ($(filter jscan, $(config)), jscan)
+ apps+= apps/jscan/jscan.o
+ hdrs+= jscan.h
+endif
+
# Rules
app= goodfet
run:
../client/goodfet.msp430 test
+avrinstall: $(app).hex
+ #to be merged
+ avrdude -V -F -c stk500v1 -p m328p -b 57600 -P $(GOODFET) -U flash:w:$(app).hex
+
+ifeq ($(platform),tilaunchpad)
+install: $(app).hex
+ $(JTAG) -e -p $(app).hex
+verify:
+ $(JTAG) -v $(app).hex
+erase:
+ $(JTAG) -e $(app).hex
+else
install: $(app).hex
- $(BSL) -e -p $(app).hex
+ $(MSP430BSL) -e -p $(app).hex
installinfo:
- $(BSL) -P $(app).hex -p info.txt || true #MSP430F2xx targets only, inelegant.
+ $(MSP430BSL) -P $(app).hex -p info.txt || true #MSP430F2xx targets only, inelegant.
verify:
- $(BSL) -P $(app).hex -v $(app).hex
+ $(MSP430BSL) -P $(app).hex -v $(app).hex
+endif
dumpinfo:
- $(BSL) --dumpinfo
+ $(MSP430BSL) --dumpinfo
+erase:
+ $(MSP430BSL) -e
$(app).c: config builddate appsfiles err
$(app): $(libs) $(apps)
+
+ifeq ($(platform),donbfet)
+$(app).hex: $(app)
+ avr-objcopy -j .text -j .data -O ihex goodfet goodfet.hex
+else
$(app).hex: $(app)
msp430-objcopy goodfet -O ihex goodfet.hex
+endif
m4s: $(app).hex
msp430-objdump -D -m msp430 $(app).hex | m4s init
-erase:
- $(BSL) -e
clean:
rm -f $(app) $(app).hex $(libs) $(apps) lib/apps.c include/config.h include/builddate.h include/apps.h
docs: