BadFET20 web errata.

[goodfet] / firmware / apps / chipcon / chipcon.c

diff --git a/firmware/apps/chipcon/chipcon.c b/firmware/apps/chipcon/chipcon.c
index c585594..0b883db 100644 (file)
--- a/firmware/apps/chipcon/chipcon.c
+++ b/firmware/apps/chipcon/chipcon.c
@@ -174,6 +174,9 @@ void cchandle(unsigned char app,
     cc_get_pc();
     txdata(app,verb,2);
     break;
+  case CC_LOCKCHIP:
+    cc_lockchip();
+    //no break, return status
   case CC_READ_STATUS:
     cc_read_status();
     txdata(app,verb,1);
@@ -264,6 +267,25 @@ void cc_wr_config(unsigned char config){
   cccmd(2);
   ccread(1);
 }
+
+//! Locks the chip.
+void cc_lockchip(){
+  debugstr("Locking chip.");
+  cc_wr_config(1);//Select Info Flash 
+  if(!(cc_rd_config()&1))
+    debugstr("Config forgotten!");
+  
+  //Clear config page.
+  cc_pokedatabyte(0xf000,0);
+  cc_write_flash_page(0);
+  if(cc_peekcodebyte(0))
+    debugstr("Failed to clear info flash byte.");
+  
+  cc_wr_config(0);  
+  if(cc_rd_config()&1)
+    debugstr("Stuck in info flash mode!");
+}
+
 //! Read the configuration byte.
 unsigned char cc_rd_config(){
   cmddata[0]=CCCMD_RD_CONFIG; //0x24
@@ -349,6 +371,7 @@ const u8 flash_routine[] = {
   0xA5                                                       //                 DB 0xA5; 
 }; 
 
+
 //! Copies flash buffer to flash.
 void cc_write_flash_page(u32 adr){
   //Assumes that page has already been written to XDATA 0xF000
@@ -379,6 +402,7 @@ void cc_write_flash_page(u32 adr){
   
   cc_set_pc(0xf000+FLASHPAGE_SIZE);//execute code fragment
   cc_resume();
+  
   //debugstr("Executing.");
   
   
@@ -386,6 +410,7 @@ void cc_write_flash_page(u32 adr){
     P1OUT^=1;//blink LED while flashing
   }
   
+  
   //debugstr("Done flashing.");
   
   P1OUT&=~1;//clear LED
@@ -454,11 +479,11 @@ unsigned char cc_debug(unsigned char len,
   unsigned char cmd=CCCMD_DEBUG_INSTR+(len&0x3);//0x54+len
   CCWRITE;
   cctrans8(cmd);
-  if(len--)
+  if(len>0)
     cctrans8(a);
-  if(len--)
+  if(len>1)
     cctrans8(b);
-  if(len--)
+  if(len>2)
     cctrans8(c);
   CCREAD;
   return cctrans8(0x00);
@@ -521,19 +546,13 @@ unsigned char cc_peekdatabyte(unsigned int adr){
     hb=(adr&0xFF00)>>8,
     lb=adr&0xFF,
     toret;
-
+  
   //MOV DPTR, adr
   cc_debug(3, 0x90, hb, lb);
   //MOVX A, @DPTR
   //Must be 2, perhaps for clocking?
   toret=cc_debug(3, 0xE0, 0, 0);
   return toret;
-  
-    /*
-DEBUG_INSTR(IN: 0x90, HIBYTE(address), LOBYTE(address), OUT: Discard);
-for (n = 0; n < count; n++) {
-    DEBUG_INSTR(IN: 0xE0, OUT: outputArray[n]);
-    DEBUG_INSTR(IN: 0xA3, OUT: Discard);
-}
-  */
 }
+
+