[PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfrom

[powerpc.git] / include / asm-arm / arch-clps711x / hardware.h

diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
index f864c36..1386871 100644 (file)
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ b/include/asm-arm/arch-clps711x/hardware.h
@@ -235,121 +235,4 @@
 #define CEIVA_PB0_BLK_BTN      (1<<0)
 #endif // #if defined (CONFIG_ARCH_CEIVA)
 
-#if defined (CONFIG_MACH_MP1000)
-/* NOR FLASH */
-#define MP1000_NIO_BASE                0xf9000000      /* virtual */
-#define MP1000_NIO_START       CS0_PHYS_BASE   /* physical */
-#define MP1000_NIO_SIZE                0x00400000
-
-/* DSP Interface */
-#define MP1000_DSP_BASE                0xfa000000      /* virtual */
-#define MP1000_DSP_START       CS1_PHYS_BASE   /* physical */
-#define MP1000_DSP_SIZE                0x00100000
-
-/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */
-#define MP1000_LIO_BASE                0xfb000000      /* virtual */
-#define MP1000_LIO_START       CS2_PHYS_BASE   /* physical */
-#define MP1000_LIO_SIZE                0x00100000
-
-/* NAND FLASH */
-#define MP1000_FIO_BASE                0xfc000000      /* virtual */
-#define MP1000_FIO_START       CS3_PHYS_BASE   /* physical */
-#define MP1000_FIO_SIZE                0x00800000
-
-/* Ethernet */
-#define MP1000_EIO_BASE                0xfd000000      /* virtual      */
-#define MP1000_EIO_START       CS4_PHYS_BASE   /* physical     */
-#define MP1000_EIO_SIZE                0x00100000
-
-#define        MP1000_LCD_OFFSET       0x00000000      /* LCD offset in CS2 */
-#define        MP1000_DDD_OFFSET       0x00001000      /* DAA/DAI/DSP sft reset offst*/
-#define        MP1000_RTC_OFFSET       0x00002000      /* RTC offset in CS2 */
-#define        MP1000_DAA_OFFSET       0x00003000      /* DAA RW reg offset in CS2 */
-
-/* IDE */
-#define MP1000_IDE_BASE                0xfe000000      /* virtual */
-#define MP1000_IDE_START       CS5_PHYS_BASE      /* physical */
-#define MP1000_IDE_SIZE                0x00100000      /* actually it's only 0x1000 */
-
-#define IRQ_HARDDISK IRQ_EINT2
-
-/*
- * IDE registers definition
- */
-
-#define IDE_CONTROL_BASE               (MP1000_IDE_BASE + 0x1000)
-#define IDE_BASE_OFF                   (MP1000_IDE_BASE)
-
-#define IDE_WRITE_DEVICE_DATA          (IDE_BASE_OFF + 0x0)
-#define IDE_FEATURES_REGISTER          (IDE_BASE_OFF + 0x2)
-#define IDE_SECTOR_COUNT_REGISTER      (IDE_BASE_OFF + 0x4)
-#define IDE_SECTOR_NUMBER_REGISTER     (IDE_BASE_OFF + 0x6)
-#define IDE_CYLINDER_LOW_REGISTER      (IDE_BASE_OFF + 0x8)
-#define IDE_CYLINDER_HIGH_REGISTER     (IDE_BASE_OFF + 0xa)
-#define IDE_DEVICE_HEAD_REGISTER       (IDE_BASE_OFF + 0xc)
-#define IDE_COMMAND_DATA_REGISTER      (IDE_BASE_OFF + 0xe)
-#define IDE_DEVICE_CONTROL_REGISTER    (IDE_CONTROL_BASE + 0xc)
-
-#define IDE_IRQ                      IRQ_EINT2
-
-
-#define RTC_PORT(x)    (MP1000_LIO_BASE+0x2000 + (x*2))
-#define RTC_ALWAYS_BCD 0
-
-/*
-// Definitions of the bit fields in the HwPortA register for the
-// MP1000 board.
-*/
-#define HwPortAKeyboardRow1                     0x00000001
-#define HwPortAKeyboardRow2                     0x00000002
-#define HwPortAKeyboardRow3                     0x00000004
-#define HwPortAKeyboardRow4                     0x00000008
-#define HwPortAKeyboardRow5                     0x00000010
-#define HwPortAKeyboardRow6                     0x00000020
-#define HwPortALCDEnable                        0x00000040
-#define HwPortAOffhook                         0x00000080
-
-/*
-// Definitions of the bit fields in the HwPortB register for the
-// MP1000 board.
-*/
-#define HwPortBL3Mode                           0x00000001
-#define HwPortBL3Clk                            0x00000002
-#define HwPortBSClk                             0x00000001
-#define HwPortBSData                            0x00000002
-#define HwPortBL3Data                           0x00000004
-#define HwPortBMute                             0x00000008
-#define HwPortBQD0                              0x00000010
-#define HwPortBQD1                              0x00000020
-#define HwPortBQD2                              0x00000040
-#define HwPortBQD3                              0x00000080
-
-/*
-// Definitions of the bit fields in the HwPortD register for the
-// MP1000 board.
-*/
-#define HwPortDLED1                             0x00000001
-#define HwPortDLED2                             0x00000002
-#define HwPortDLED3                             0x00000004
-#define HwPortDLED4                             0x00000008
-#define HwPortDLED5                             0x00000010
-#define HwPortDEECS                             0x00000020
-#define HwPortBRTS                              0x00000040
-#define HwPortBRI                               0x00000080
-
-
-/*
-// Definitions of the bit fields in the HwPortE register for the
-// MP1000 board.
-*/
-
-#define HwPortECLE                              0x00000001
-#define HwPortESepromDOut                       0x00000001
-#define HwPortEALE                              0x00000002
-#define HwPortESepromDIn                        0x00000002
-#define HwPortENANDCS                           0x00000004
-#define HwPortESepromCLK                        0x00000004
-
-#endif // #if defined (CONFIG_MACH_MP1000)
-
 #endif