#include <sys/types.h>
/*
-07h = TagIt
-04h = I.CODE
-05h = Infineon
-02h = ST
-*/
+ * ISO15693 tag manufacturer codes as found at
+ * http://rfid-handbook.de/forum/read.php?5,437,580#msg-580
+ *
+ * 01h = Motorola
+ * 02h = ST Microelectronics
+ * 03h = Hitachi
+ * 04h = Philips/NXP I.CODE
+ * 05h = Siemens/Infineon
+ * 06h = Cylinc
+ * 07h = Texas Instruments TagIt
+ * 08h = Fujitsu Limited
+ * 09h = Mashushita Electric Industrial
+ * 0Ah = NEC
+ * 0Bh = Oki Electric
+ * 0Ch = Toshiba
+ * 0Dh = Mishubishi Electric
+ * 0Eh = Samsung Electronics
+ * 0Fh = Hyundai Electronics
+ * 10h = LG Semiconductors
+ * 16h = EMarin Microelectronic
+ *
+ */
/* protocol definitions */
enum rfid_15693_state {
ISO15693_STATE_ERROR,
ISO15693_STATE_NONE,
+ ISO15693_STATE_ANTICOL_RUNNING,
};
enum rfid_15693_opt {
#define ISO15693_UID_LEN 8
#define ISO15693_CRC_LEN 2
-/* ISO 15693-3, Ch. 7.2 Table 3*/
+/* ISO 15693-3, Ch. 7.2 Table 3 */
enum iso15693_request_flags {
RFID_15693_F_SUBC_TWO = 0x01,
RFID_15693_F_RATE_HIGH = 0x02,
u_int8_t data[0];
} __attribute__ ((packed));
+/* ISO 15963-3, Ch. 7.2 Figure 5 */
+struct iso15693_response {
+ u_int8_t flags;
+ u_int8_t data[0];
+} __attribute__ ((packed));
+
/* ISO 15693, Ch. 7.3 Table 6 */
enum iso15693_response_flags {
RFID_15693_RF_ERROR = 0x01,
RFID_15693_ERR_BLOCK_LOCKED_CH = 0x12,
RFID_15693_ERR_BLOCK_NOTPROG = 0x13,
RFID_15693_ERR_BLOCK_NOTLOCK = 0x14,
+ /* 0xA0 .. 0xDF Custom Command error Codes */
};
/* ISO 15693, Ch. 7.4 */
/* Proprietary 0xe0 .. 0xff */
};
+struct iso15693_anticol_cmd {
+ /* iso15693-3 table5 flags*/
+ unsigned char flags; // SLOTS16 | SLOT1, AFI_PRESENT, OPTION_FLAG
+ unsigned char afi; // AFI 0 for any
+ unsigned char mask_len;
+ unsigned char mask_bits[ISO15693_UID_LEN];
+ unsigned char current_slot;
+} __attribute__((packed));
#include <librfid/rfid_layer2.h>
extern const struct rfid_layer2 rfid_layer2_iso15693;