#ifndef GET_FPEXC_CTL
# define GET_FPEXC_CTL(a,b) (-EINVAL)
#endif
+#ifndef GET_ENDIAN
+# define GET_ENDIAN(a,b) (-EINVAL)
+#endif
+#ifndef SET_ENDIAN
+# define SET_ENDIAN(a,b) (-EINVAL)
+#endif
/*
* this is where the system-wide overflow UID and GID are defined, for
*/
if (tbuf) {
struct tms tmp;
+ struct task_struct *tsk = current;
+ struct task_struct *t;
cputime_t utime, stime, cutime, cstime;
-#ifdef CONFIG_SMP
- if (thread_group_empty(current)) {
- /*
- * Single thread case without the use of any locks.
- *
- * We may race with release_task if two threads are
- * executing. However, release task first adds up the
- * counters (__exit_signal) before removing the task
- * from the process tasklist (__unhash_process).
- * __exit_signal also acquires and releases the
- * siglock which results in the proper memory ordering
- * so that the list modifications are always visible
- * after the counters have been updated.
- *
- * If the counters have been updated by the second thread
- * but the thread has not yet been removed from the list
- * then the other branch will be executing which will
- * block on tasklist_lock until the exit handling of the
- * other task is finished.
- *
- * This also implies that the sighand->siglock cannot
- * be held by another processor. So we can also
- * skip acquiring that lock.
- */
- utime = cputime_add(current->signal->utime, current->utime);
- stime = cputime_add(current->signal->utime, current->stime);
- cutime = current->signal->cutime;
- cstime = current->signal->cstime;
- } else
-#endif
- {
+ spin_lock_irq(&tsk->sighand->siglock);
+ utime = tsk->signal->utime;
+ stime = tsk->signal->stime;
+ t = tsk;
+ do {
+ utime = cputime_add(utime, t->utime);
+ stime = cputime_add(stime, t->stime);
+ t = next_thread(t);
+ } while (t != tsk);
- /* Process with multiple threads */
- struct task_struct *tsk = current;
- struct task_struct *t;
+ cutime = tsk->signal->cutime;
+ cstime = tsk->signal->cstime;
+ spin_unlock_irq(&tsk->sighand->siglock);
- read_lock(&tasklist_lock);
- utime = tsk->signal->utime;
- stime = tsk->signal->stime;
- t = tsk;
- do {
- utime = cputime_add(utime, t->utime);
- stime = cputime_add(stime, t->stime);
- t = next_thread(t);
- } while (t != tsk);
-
- /*
- * While we have tasklist_lock read-locked, no dying thread
- * can be updating current->signal->[us]time. Instead,
- * we got their counts included in the live thread loop.
- * However, another thread can come in right now and
- * do a wait call that updates current->signal->c[us]time.
- * To make sure we always see that pair updated atomically,
- * we take the siglock around fetching them.
- */
- spin_lock_irq(&tsk->sighand->siglock);
- cutime = tsk->signal->cutime;
- cstime = tsk->signal->cstime;
- spin_unlock_irq(&tsk->sighand->siglock);
- read_unlock(&tasklist_lock);
- }
tmp.tms_utime = cputime_to_clock_t(utime);
tmp.tms_stime = cputime_to_clock_t(stime);
tmp.tms_cutime = cputime_to_clock_t(cutime);
asmlinkage long sys_setsid(void)
{
struct task_struct *group_leader = current->group_leader;
- struct pid *pid;
+ pid_t session;
int err = -EPERM;
mutex_lock(&tty_mutex);
write_lock_irq(&tasklist_lock);
- pid = find_pid(PIDTYPE_PGID, group_leader->pid);
- if (pid)
+ /* Fail if I am already a session leader */
+ if (group_leader->signal->leader)
+ goto out;
+
+ session = group_leader->pid;
+ /* Fail if a process group id already exists that equals the
+ * proposed session id.
+ *
+ * Don't check if session id == 1 because kernel threads use this
+ * session id and so the check will always fail and make it so
+ * init cannot successfully call setsid.
+ */
+ if (session > 1 && find_task_by_pid_type(PIDTYPE_PGID, session))
goto out;
group_leader->signal->leader = 1;
- __set_special_pids(group_leader->pid, group_leader->pid);
+ __set_special_pids(session, session);
group_leader->signal->tty = NULL;
group_leader->signal->tty_old_pgrp = 0;
err = process_group(group_leader);
* fields when reaping, so a sample either gets all the additions of a
* given child after it's reaped, or none so this sample is before reaping.
*
- * tasklist_lock locking optimisation:
- * If we are current and single threaded, we do not need to take the tasklist
- * lock or the siglock. No one else can take our signal_struct away,
- * no one else can reap the children to update signal->c* counters, and
- * no one else can race with the signal-> fields.
- * If we do not take the tasklist_lock, the signal-> fields could be read
- * out of order while another thread was just exiting. So we place a
- * read memory barrier when we avoid the lock. On the writer side,
- * write memory barrier is implied in __exit_signal as __exit_signal releases
- * the siglock spinlock after updating the signal-> fields.
- *
- * We don't really need the siglock when we access the non c* fields
- * of the signal_struct (for RUSAGE_SELF) even in multithreaded
- * case, since we take the tasklist lock for read and the non c* signal->
- * fields are updated only in __exit_signal, which is called with
- * tasklist_lock taken for write, hence these two threads cannot execute
- * concurrently.
+ * Locking:
+ * We need to take the siglock for CHILDEREN, SELF and BOTH
+ * for the cases current multithreaded, non-current single threaded
+ * non-current multithreaded. Thread traversal is now safe with
+ * the siglock held.
+ * Strictly speaking, we donot need to take the siglock if we are current and
+ * single threaded, as no one else can take our signal_struct away, no one
+ * else can reap the children to update signal->c* counters, and no one else
+ * can race with the signal-> fields. If we do not take any lock, the
+ * signal-> fields could be read out of order while another thread was just
+ * exiting. So we should place a read memory barrier when we avoid the lock.
+ * On the writer side, write memory barrier is implied in __exit_signal
+ * as __exit_signal releases the siglock spinlock after updating the signal->
+ * fields. But we don't do this yet to keep things simple.
*
*/
struct task_struct *t;
unsigned long flags;
cputime_t utime, stime;
- int need_lock = 0;
memset((char *) r, 0, sizeof *r);
utime = stime = cputime_zero;
- if (p != current || !thread_group_empty(p))
- need_lock = 1;
-
- if (need_lock) {
- read_lock(&tasklist_lock);
- if (unlikely(!p->signal)) {
- read_unlock(&tasklist_lock);
- return;
- }
- } else
- /* See locking comments above */
- smp_rmb();
+ rcu_read_lock();
+ if (!lock_task_sighand(p, &flags)) {
+ rcu_read_unlock();
+ return;
+ }
switch (who) {
case RUSAGE_BOTH:
case RUSAGE_CHILDREN:
- spin_lock_irqsave(&p->sighand->siglock, flags);
utime = p->signal->cutime;
stime = p->signal->cstime;
r->ru_nvcsw = p->signal->cnvcsw;
r->ru_nivcsw = p->signal->cnivcsw;
r->ru_minflt = p->signal->cmin_flt;
r->ru_majflt = p->signal->cmaj_flt;
- spin_unlock_irqrestore(&p->sighand->siglock, flags);
if (who == RUSAGE_CHILDREN)
break;
BUG();
}
- if (need_lock)
- read_unlock(&tasklist_lock);
+ unlock_task_sighand(p, &flags);
+ rcu_read_unlock();
+
cputime_to_timeval(utime, &r->ru_utime);
cputime_to_timeval(stime, &r->ru_stime);
}
return -EFAULT;
return 0;
}
+ case PR_GET_ENDIAN:
+ error = GET_ENDIAN(current, arg2);
+ break;
+ case PR_SET_ENDIAN:
+ error = SET_ENDIAN(current, arg2);
+ break;
+
default:
error = -EINVAL;
break;
projects / powerpc.git / blobdiff