--- /dev/null
+/*************************************************************************/
+/* */
+/* Mifare support for accessing RFID cards with OpenPCD RFID reader */
+/* in WIN32 - see http://www.openpcd.org */
+/* */
+/* Copyright (C) 2007 Milosch Meriac <meriac@bitmanufaktur.de> */
+/* */
+/* Redistribution and use in source and binary forms, with or without */
+/* modification, are permitted provided that the following conditions are*/
+/* met: */
+/* */
+/* Redistributions of source code must retain the above copyright notice,*/
+/* this list of conditions and the following disclaimer. */
+/* Redistributions in binary form must reproduce the above copyright */
+/* notice, this list of conditions and the following disclaimer in the */
+/* documentation and/or other materials provided with the distribution. */
+/* */
+/* The name of the author may not be used to endorse or promote products */
+/* derived from this software without specific prior written permission. */
+/* */
+/* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR */
+/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED */
+/* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE*/
+/* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, */
+/* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES */
+/* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR */
+/* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) */
+/* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, */
+/* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING */
+/* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE */
+/* POSSIBILITY OF SUCH DAMAGE. */
+/* */
+/*************************************************************************/
+
+#ifndef __OPENPCD_H__
+#define __OPENPCD_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif/*__cplusplus*/
+#define EXPORT extern
+#define EXPORT_CONVENTION
+
+#define PCDERROR_NONE 0
+#define PCDERROR_INVALID_PARAMETER -1
+#define PCDERROR_KEY_FORMAT -2
+#define PCDERROR_KEY_AUTH -3
+#define PCDERROR_NO_CARD_FOUND -4
+#define PCDERROR_LAYER2_INIT -5
+#define PCDERROR_LAYER2_OPEN -6
+#define PCDERROR_LAYER3_INIT -7
+#define PCDERROR_LAYER3_OPEN -8
+#define PCDERROR_SELECT -9
+#define PCDERROR_READ_FAILED -10
+#define PCDERROR_WRITE_FAILED -11
+#define PCDERROR_CLOSED -12
+#define PCDERROR_NO_READER -13
+#define PCDERROR_OUT_OF_MEMORY -14
+#define PCDERROR_READER_VERSION -15
+
+#define PCDAUTH_KEY_LENGTH 6
+#define PCDAUTH_KEYID_1A 0
+#define PCDAUTH_KEYID_1B 1
+
+typedef void* MIFARE_HANDLE;
+
+/*************************************************************************/
+/* */
+/* Six steps for reading/writing to MIFARE cards */
+/* */
+/*************************************************************************/
+
+/* Step 1. open reader
+
+ supply the address of your handle variable to retrieve a handle
+ to the current reader.
+ */
+EXPORT int EXPORT_CONVENTION openpcd_open_reader(MIFARE_HANDLE *handle);
+
+/* Step 2. set MIFARE classic key
+
+ if your key differs from the default Infineon key (6*0xFF), you can
+ supply a different key here. The key size is PCDAUTH_KEY_LENGTH bytes.
+ You can chose to set key_id to PCDAUTH_KEYID_1A or *_1B.
+ */
+EXPORT int EXPORT_CONVENTION openpcd_set_key(MIFARE_HANDLE handle,unsigned int key_id,const void* key);
+
+/* Step 3. select card
+
+ start the anticollosion to select a card in the reader field - retry if
+ it fails. Currently supports only on card in the readerv field.
+ */
+EXPORT int EXPORT_CONVENTION openpcd_select_card(MIFARE_HANDLE handle);
+
+/* Step 4. read/write card
+
+ read, write from the selected card - specify the page and supply up to
+ 16 bytes of payload
+ */
+EXPORT int EXPORT_CONVENTION openpcd_read(MIFARE_HANDLE handle,int page, void* data, int len);
+EXPORT int EXPORT_CONVENTION openpcd_write(MIFARE_HANDLE handle,int page,const void *data,int len);
+
+/* Step 5. deselect card when done
+ */
+EXPORT int EXPORT_CONVENTION openpcd_deselect_card(MIFARE_HANDLE handle);
+
+/* Step 6. close reader after deselected card
+ */
+EXPORT int EXPORT_CONVENTION openpcd_close_reader(MIFARE_HANDLE handle);
+
+
+/*************************************************************************/
+/* */
+/* Support functions */
+/* */
+/*************************************************************************/
+
+/* openpcd_get_error_text:
+
+ Used for converting the error code into a string
+ */
+EXPORT char* EXPORT_CONVENTION openpcd_get_error_text(int error);
+
+
+/* openpcd_get_card_id:
+
+ Get the card id of a selected RFID card
+ */
+EXPORT int EXPORT_CONVENTION openpcd_get_card_id(MIFARE_HANDLE handle,unsigned int *uid);
+
+/* openpcd_get_api_version:
+
+ Get the USB api version of the reader
+ */
+EXPORT int EXPORT_CONVENTION openpcd_get_api_version(MIFARE_HANDLE handle,unsigned int *version);
+
+/* openpcd_reset_reader:
+
+ Reset the attached reader
+ */
+EXPORT int EXPORT_CONVENTION openpcd_reset_reader(MIFARE_HANDLE handle);
+
+/* openpcd_get_environment
+
+ Store the given data to the nonvolatile reader flash
+ Returns read data count at index or error code
+ */
+EXPORT int EXPORT_CONVENTION openpcd_get_environment(
+ MIFARE_HANDLE handle,
+ unsigned char count,
+ unsigned char* data
+);
+
+/* openpcd_set_environment
+
+ Read data from nonvolatile reader flash
+ Returns written data count at index or error code
+ */
+EXPORT int EXPORT_CONVENTION openpcd_set_environment(
+ MIFARE_HANDLE handle,
+ unsigned char count,
+ const unsigned char* data
+);
+
+#ifdef __cplusplus
+}
+#endif/*__cplusplus*/
+#endif/*__OPENPCD_H__*/
projects / librfid / blobdiff