my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.06';
+my $V = '0.07';
use Getopt::Long qw(:config no_auto_abbrev);
return $vet;
}
+sub ERROR {
+ print "ERROR: $_[0]\n";
+ our $clean = 0;
+}
+sub WARN {
+ print "WARNING: $_[0]\n";
+ our $clean = 0;
+}
+sub CHK {
+ print "CHECK: $_[0]\n";
+ our $clean = 0;
+}
+
sub process {
my $filename = shift;
my @lines = @_;
my $previndent=0;
my $stashindent=0;
- my $clean = 1;
+ our $clean = 1;
my $signoff = 0;
my $is_patch = 0;
long\s+int|
long\s+long|
long\s+long\s+int|
+ u8|u16|u32|u64|
+ s8|s16|s32|s64|
struct\s+$Ident|
union\s+$Ident|
+ enum\s+$Ident|
${Ident}_t
)
(?:\s+$Sparse)*
my $Declare = qr{(?:$Storage\s+)?$Type};
my $Attribute = qr{__read_mostly|__init|__initdata};
+ # Pre-scan the patch looking for any __setup documentation.
+ my @setup_docs = ();
+ my $setup_docs = 0;
+ foreach my $line (@lines) {
+ if ($line=~/^\+\+\+\s+(\S+)/) {
+ $setup_docs = 0;
+ if ($1 =~ m@Documentation/kernel-parameters.txt$@) {
+ $setup_docs = 1;
+ }
+ next;
+ }
+
+ if ($setup_docs && $line =~ /^\+/) {
+ push(@setup_docs, $line);
+ }
+ }
+
foreach my $line (@lines) {
$linenr++;
$here .= "FILE: $realfile:$realline:" if ($realcnt != 0);
my $hereline = "$here\n$line\n";
- my $herecurr = "$here\n$line\n\n";
- my $hereprev = "$here\n$prevline\n$line\n\n";
+ my $herecurr = "$here\n$line\n";
+ my $hereprev = "$here\n$prevline\n$line\n";
#check the patch for a signoff:
if ($line =~ /^\s*signed-off-by:/i) {
# This is a signoff, if ugly, so do not double report.
$signoff++;
if (!($line =~ /^\s*Signed-off-by:/)) {
- print "Signed-off-by: is the preferred form\n";
- print "$herecurr";
- $clean = 0;
+ WARN("Signed-off-by: is the preferred form\n" .
+ $herecurr);
}
if ($line =~ /^\s*signed-off-by:\S/i) {
- print "need space after Signed-off-by:\n";
- print "$herecurr";
- $clean = 0;
+ WARN("need space after Signed-off-by:\n" .
+ $herecurr);
}
}
# Check for wrappage within a valid hunk of the file
if ($realcnt != 0 && $line !~ m{^(?:\+|-| |$)}) {
- print "patch seems to be corrupt (line wrapped?) [$realcnt]\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("patch seems to be corrupt (line wrapped?)\n" .
+ $herecurr);
+ }
+
+# UTF-8 regex found at http://www.w3.org/International/questions/qa-forms-utf-8.en.php
+ if (($realfile =~ /^$/ || $line =~ /^\+/) &&
+ !($line =~ m/^(
+ [\x09\x0A\x0D\x20-\x7E] # ASCII
+ | [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte
+ | \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs
+ | [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte
+ | \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates
+ | \xF0[\x90-\xBF][\x80-\xBF]{2} # planes 1-3
+ | [\xF1-\xF3][\x80-\xBF]{3} # planes 4-15
+ | \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16
+ )*$/x )) {
+ ERROR("Invalid UTF-8\n" . $herecurr);
}
#ignore lines being removed
#trailing whitespace
if ($line =~ /^\+.*\S\s+$/ || $line =~ /^\+\s+$/) {
- my $herevet = "$here\n" . cat_vet($line) . "\n\n";
- print "trailing whitespace\n";
- print "$herevet";
- $clean = 0;
+ my $herevet = "$here\n" . cat_vet($line) . "\n";
+ ERROR("trailing whitespace\n" . $herevet);
}
#80 column limit
if ($line =~ /^\+/ && !($prevline=~/\/\*\*/) && $length > 80) {
- print "line over 80 characters\n";
- print "$herecurr";
- $clean = 0;
+ WARN("line over 80 characters\n" . $herecurr);
}
# check we are in a valid source file *.[hc] if not then ignore this hunk
# at the beginning of a line any tabs must come first and anything
# more than 8 must use tabs.
if ($line=~/^\+\s* \t\s*\S/ or $line=~/^\+\s* \s*/) {
- my $herevet = "$here\n" . cat_vet($line) . "\n\n";
- print "use tabs not spaces\n";
- print "$herevet";
- $clean = 0;
+ my $herevet = "$here\n" . cat_vet($line) . "\n";
+ ERROR("use tabs not spaces\n" . $herevet);
}
#
}
}
if ($err ne '') {
- print "switch and case should be at the same indent\n";
- print "$here\n$line\n$err\n";
- $clean = 0;
+ ERROR("switch and case should be at the same indent\n$hereline\n$err\n");
+ }
+ }
+
+# if/while/etc brace do not go on next line, unless defining a do while loop,
+# or if that brace on the next line is for something else
+ if ($line =~ /\b(?:(if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+ my @ctx = ctx_statement($linenr, $realcnt);
+ my $ctx_ln = $linenr + $#ctx + 1;
+ my $ctx_cnt = $realcnt - $#ctx - 1;
+ my $ctx = join("\n", @ctx);
+
+ while ($ctx_cnt > 0 && $lines[$ctx_ln - 1] =~ /^-/) {
+ $ctx_ln++;
+ $ctx_cnt--;
+ }
+ ##warn "line<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>";
+
+ if ($ctx !~ /{\s*/ && $ctx_cnt > 0 && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
+ ERROR("That { should be on the previous line\n" .
+ "$here\n$ctx\n$lines[$ctx_ln - 1]");
}
}
# TEST: allow direct testing of the type matcher.
if ($tst_type && $line =~ /^.$Declare$/) {
- print "TEST: is type $Declare\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("TEST: is type $Declare\n" . $herecurr);
next;
}
if ($rawline =~ m{^.#\s*include\s+[<"](.*)[">]}) {
my $path = $1;
if ($path =~ m{//}) {
- print "malformed #include filename\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("malformed #include filename\n" .
+ $herecurr);
}
# Sanitise this special form of string.
$path = 'X' x length($path);
# no C99 // comments
if ($line =~ m{//}) {
- print "do not use C99 // comments\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("do not use C99 // comments\n" . $herecurr);
}
# Remove C99 comments.
$line =~ s@//.*@@;
($prevline !~ /^\+}/) &&
($prevline !~ /^ }/) &&
($prevline !~ /\s$name(?:\s+$Attribute)?\s*(?:;|=)/)) {
- print "EXPORT_SYMBOL(foo); should immediately follow its function/variable\n";
- print "$herecurr";
- $clean = 0;
+ WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
}
}
# check for static initialisers.
if ($line=~/\s*static\s.*=\s+(0|NULL);/) {
- print "do not initialise statics to 0 or NULL\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("do not initialise statics to 0 or NULL\n" .
+ $herecurr);
}
# check for new typedefs, only function parameters and sparse annotations
# make sense.
if ($line =~ /\btypedef\s/ &&
- $line !~ /\btypedef\s+$Type\s+\(\s*$Ident\s*\)\s*\(/ &&
+ $line !~ /\btypedef\s+$Type\s+\(\s*\*$Ident\s*\)\s*\(/ &&
$line !~ /\b__bitwise(?:__|)\b/) {
- print "do not add new typedefs\n";
- print "$herecurr";
- $clean = 0;
+ WARN("do not add new typedefs\n" . $herecurr);
}
# * goes on variable not on type
if ($line =~ m{\($NonptrType(\*+)(?:\s+const)?\)}) {
- print "\"(foo$1)\" should be \"(foo $1)\"\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("\"(foo$1)\" should be \"(foo $1)\"\n" .
+ $herecurr);
} elsif ($line =~ m{\($NonptrType\s+(\*+)(?!\s+const)\s+\)}) {
- print "\"(foo $1 )\" should be \"(foo $1)\"\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("\"(foo $1 )\" should be \"(foo $1)\"\n" .
+ $herecurr);
} elsif ($line =~ m{$NonptrType(\*+)(?:\s+const)?\s+[A-Za-z\d_]+}) {
- print "\"foo$1 bar\" should be \"foo $1bar\"\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("\"foo$1 bar\" should be \"foo $1bar\"\n" .
+ $herecurr);
} elsif ($line =~ m{$NonptrType\s+(\*+)(?!\s+const)\s+[A-Za-z\d_]+}) {
- print "\"foo $1 bar\" should be \"foo $1bar\"\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("\"foo $1 bar\" should be \"foo $1bar\"\n" .
+ $herecurr);
}
# # no BUG() or BUG_ON()
}
}
if ($ok == 0) {
- print "printk() should include KERN_ facility level\n";
- print "$herecurr";
- $clean = 0;
+ WARN("printk() should include KERN_ facility level\n" . $herecurr);
}
}
# or if closed on same line
if (($line=~/$Type\s*[A-Za-z\d_]+\(.*\).* {/) and
!($line=~/\#define.*do\s{/) and !($line=~/}/)) {
- print "braces following function declarations go on the next line\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr);
}
# Check operator spacing.
}
# Pick up the preceeding and succeeding characters.
- my $ca = substr($opline, $off - 1, 1);
+ my $ca = substr($opline, 0, $off);
my $cc = '';
if (length($opline) >= ($off + length($elements[$n + 1]))) {
$cc = substr($opline, $off + length($elements[$n + 1]));
}
+ my $cb = "$ca$;$cc";
my $ctx = "${a}x${c}";
my $at = "(ctx:$ctx)";
my $ptr = (" " x $off) . "^";
- my $hereptr = "$hereline$ptr\n\n";
+ my $hereptr = "$hereline$ptr\n";
##print "<$s1:$op:$s2> <$elements[$n]:$elements[$n + 1]:$elements[$n + 2]>\n";
# ; should have either the end of line or a space or \ after it
if ($op eq ';') {
- if ($ctx !~ /.x[WE]/ && $cc !~ /^\\/) {
- print "need space after that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ if ($ctx !~ /.x[WEB]/ && $cc !~ /^\\/ &&
+ $cc !~ /^;/) {
+ ERROR("need space after that '$op' $at\n" . $hereptr);
}
# // is a comment
# -> should have no spaces
} elsif ($op eq '->') {
if ($ctx =~ /Wx.|.xW/) {
- print "no spaces around that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ ERROR("no spaces around that '$op' $at\n" . $hereptr);
}
# , must have a space on the right.
} elsif ($op eq ',') {
if ($ctx !~ /.xW|.xE/ && $cc !~ /^}/) {
- print "need space after that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ ERROR("need space after that '$op' $at\n" . $hereptr);
}
# unary ! and unary ~ are allowed no space on the right
} elsif ($op eq '!' or $op eq '~') {
if ($ctx !~ /[WOEB]x./) {
- print "need space before that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ ERROR("need space before that '$op' $at\n" . $hereptr);
}
if ($ctx =~ /.xW/) {
- print "no space after that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ ERROR("no space after that '$op' $at\n" . $hereptr);
}
# unary ++ and unary -- are allowed no space on one side.
} elsif ($op eq '++' or $op eq '--') {
if ($ctx !~ /[WOB]x[^W]/ && $ctx !~ /[^W]x[WOBE]/) {
- print "need space one side of that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ ERROR("need space one side of that '$op' $at\n" . $hereptr);
}
if ($ctx =~ /Wx./ && $cc =~ /^;/) {
- print "no space before that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ ERROR("no space before that '$op' $at\n" . $hereptr);
}
# & is both unary and binary
#
} elsif ($op eq '&' or $op eq '-') {
if ($ctx !~ /VxV|[EW]x[WE]|[EWB]x[VO]/) {
- print "need space before that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ ERROR("need space before that '$op' $at\n" . $hereptr);
}
# * is the same as & only adding:
# (foo **)
#
} elsif ($op eq '*') {
- if ($ca eq '*') {
- if ($cc =~ /^\s(?!\s*const)/) {
- print "no space after that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
- }
- } elsif ($ctx !~ /VxV|[EW]x[WE]|[EWB]x[VO]|OxV|WxB|BxB/) {
- print "need space before that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ if ($ca !~ /$Type$/ && $cb !~ /(\*$;|$;\*)/ &&
+ $ctx !~ /VxV|[EW]x[WE]|[EWB]x[VO]|OxV|WxB|BxB/) {
+ ERROR("need space before that '$op' $at\n" . $hereptr);
}
# << and >> may either have or not have spaces both sides
$op eq '^' or $op eq '|')
{
if ($ctx !~ /VxV|WxW|VxE|WxE/) {
- print "need consistent spacing around '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ ERROR("need consistent spacing around '$op' $at\n" .
+ $hereptr);
}
# All the others need spaces both sides.
} elsif ($ctx !~ /[EW]x[WE]/) {
- print "need spaces around that '$op' $at\n";
- print "$hereptr";
- $clean = 0;
+ ERROR("need spaces around that '$op' $at\n" . $hereptr);
}
$off += length($elements[$n + 1]);
}
}
#need space before brace following if, while, etc
- if ($line=~/\(.*\){/) {
- print "need a space before the brace\n";
- print "$herecurr";
- $clean = 0;
+ if ($line =~ /\(.*\){/ || $line =~ /do{/) {
+ ERROR("need a space before the open brace '{'\n" . $herecurr);
+ }
+
+# closing brace should have a space following it when it has anything
+# on the line
+ if ($line =~ /}(?!(?:,|;|\)))\S/) {
+ ERROR("need a space after that close brace '}'\n" . $herecurr);
}
#goto labels aren't indented, allow a single space however
if ($line=~/^.\s+[A-Za-z\d_]+:(?![0-9]+)/ and
!($line=~/^. [A-Za-z\d_]+:/) and !($line=~/^.\s+default:/)) {
- print "labels should not be indented\n";
- print "$herecurr";
- $clean = 0;
+ WARN("labels should not be indented\n" . $herecurr);
}
# Need a space before open parenthesis after if, while etc
if ($line=~/\b(if|while|for|switch)\(/) {
- print "need a space before the open parenthesis\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("need a space before the open parenthesis '('\n" . $herecurr);
}
# Check for illegal assignment in if conditional.
if ($line=~/\bif\s*\(.*[^<>!=]=[^=].*\)/) {
#next if ($line=~/\".*\Q$op\E.*\"/ or $line=~/\'\Q$op\E\'/);
- print "do not use assignment in if condition\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("do not use assignment in if condition\n" . $herecurr);
}
# Check for }<nl>else {, these must be at the same
# indent level to be relevant to each other.
if ($prevline=~/}\s*$/ and $line=~/^.\s*else\s*/ and
$previndent == $indent) {
- print "else should follow close brace\n";
- print "$hereprev";
- $clean = 0;
+ ERROR("else should follow close brace '}'\n" . $hereprev);
}
#studly caps, commented out until figure out how to distinguish between use of existing and adding new
#no spaces allowed after \ in define
if ($line=~/\#define.*\\\s$/) {
- print("Whitepspace after \\ makes next lines useless\n");
- print "$herecurr";
- $clean = 0;
+ WARN("Whitepspace after \\ makes next lines useless\n" . $herecurr);
}
#warn if <asm/foo.h> is #included and <linux/foo.h> is available (uses RAW line)
if ($tree && $rawline =~ m{^.\#\s*include\s*\<asm\/(.*)\.h\>}) {
my $checkfile = "include/linux/$1.h";
if (-f $checkfile) {
- print "Use #include <linux/$1.h> instead of <asm/$1.h>\n";
- print $herecurr;
- $clean = 0;
- }
- }
-
-# if/while/etc brace do not go on next line, unless defining a do while loop,
-# or if that brace on the next line is for something else
- if ($prevline=~/\b(?:(if|while|for|switch)\s*\(|do\b|else\b)/) {
- my @opened = $prevline=~/\(/g;
- my @closed = $prevline=~/\)/g;
- my $nr_line = $linenr;
- my $remaining = $realcnt - 1;
- my $next_line = $line;
- my $extra_lines = 0;
- my $display_segment = $prevline;
-
- while ($remaining > 0 && scalar @opened > scalar @closed) {
- $prevline .= $next_line;
- $display_segment .= "\n" . $next_line;
- $next_line = $lines[$nr_line];
- $nr_line++;
- $remaining--;
-
- @opened = $prevline=~/\(/g;
- @closed = $prevline=~/\)/g;
- }
-
- if (($prevline=~/\b(?:(if|while|for|switch)\s*\(.*\)|do|else)\s*$/) and ($next_line=~/{/) and
- !($next_line=~/\b(?:if|while|for|switch|do|else)\b/) and !($next_line=~/\#define.*do.*while/)) {
- print "That { should be on the previous line\n";
- print "$here\n$display_segment\n$next_line\n\n";
- $clean = 0;
+ CHK("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
+ $herecurr);
}
}
# if and else should not have general statements after it
if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/ &&
- $1 !~ /^\s*(?:\sif|{|$)/) {
- print "trailing statements should be on next line\n";
- print "$herecurr";
- $clean = 0;
+ $1 !~ /^\s*(?:\sif|{|\\|$)/) {
+ ERROR("trailing statements should be on next line\n" . $herecurr);
}
# multi-statement macros should be enclosed in a do while loop, grab the
$ln--;
$cnt++;
}
- my $ctx = join('', ctx_statement($ln, $cnt));
+ my @ctx = ctx_statement($ln, $cnt);
+ my $ctx_ln = $ln + $#ctx + 1;
+ my $ctx = join("\n", @ctx);
+
+ # Pull in any empty extension lines.
+ while ($ctx =~ /\\$/ &&
+ $lines[$ctx_ln - 1] =~ /^.\s*(?:\\)?$/) {
+ $ctx .= $lines[$ctx_ln - 1];
+ $ctx_ln++;
+ }
if ($ctx =~ /\\$/) {
if ($ctx =~ /;/) {
- print "Macros with multiple statements should be enclosed in a do - while loop\n";
+ ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n");
} else {
- print "Macros with complex values should be enclosed in parenthesis\n";
+ ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
}
- print "$hereprev";
- $clean = 0;
}
}
# don't include deprecated include files (uses RAW line)
for my $inc (@dep_includes) {
if ($rawline =~ m@\#\s*include\s*\<$inc>@) {
- print "Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr);
}
}
# don't use deprecated functions
for my $func (@dep_functions) {
if ($line =~ /\b$func\b/) {
- print "Don't use $func(): see Documentation/feature-removal-schedule.txt\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("Don't use $func(): see Documentation/feature-removal-schedule.txt\n" . $herecurr);
}
}
# no volatiles please
if ($line =~ /\bvolatile\b/ && $line !~ /\basm\s+volatile\b/) {
- print "Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt\n";
- print "$herecurr";
- $clean = 0;
+ WARN("Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt\n" . $herecurr);
}
# warn about #if 0
if ($line =~ /^.#\s*if\s+0\b/) {
- print "#if 0 -- if this code redundant remove it\n";
- print "$herecurr";
- $clean = 0;
+ CHK("if this code is redundant consider removing it\n" .
+ $herecurr);
}
# warn about #ifdefs in C files
if ($line =~ /^.\s*(struct\s+mutex|spinlock_t)\s+\S+;/) {
my $which = $1;
if (!ctx_has_comment($first_line, $linenr)) {
- print "$1 definition without comment\n";
- print "$herecurr";
- $clean = 0;
+ CHK("$1 definition without comment\n" . $herecurr);
}
}
# check for memory barriers without a comment.
if ($line =~ /\b(mb|rmb|wmb|read_barrier_depends|smp_mb|smp_rmb|smp_wmb|smp_read_barrier_depends)\(/) {
if (!ctx_has_comment($first_line, $linenr)) {
- print "memory barrier without comment\n";
- print "$herecurr";
- $clean = 0;
+ CHK("memory barrier without comment\n" . $herecurr);
}
}
# check of hardware specific defines
if ($line =~ m@^.#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@) {
- print "architecture specific defines should be avoided\n";
- print "$herecurr";
- $clean = 0;
+ CHK("architecture specific defines should be avoided\n" . $herecurr);
}
+# check the location of the inline attribute, that it is between
+# storage class and type.
if ($line =~ /$Type\s+(?:inline|__always_inline)\b/ ||
$line =~ /\b(?:inline|always_inline)\s+$Storage/) {
- print "inline keyword should sit between storage class and type\n";
- print "$herecurr";
- $clean = 0;
+ ERROR("inline keyword should sit between storage class and type\n" . $herecurr);
+ }
+
+# check for new externs in .c files.
+ if ($line =~ /^.\s*extern\s/ && ($realfile =~ /\.c$/)) {
+ WARN("externs should be avoided in .c files\n" . $herecurr);
+ }
+
+# checks for new __setup's
+ if ($rawline =~ /\b__setup\("([^"]*)"/) {
+ my $name = $1;
+
+ if (!grep(/$name/, @setup_docs)) {
+ CHK("__setup appears un-documented -- check Documentation/kernel-parameters.txt\n" . $herecurr);
+ }
}
}
if ($chk_patch && !$is_patch) {
- $clean = 0;
- print "Does not appear to be a unified-diff format patch\n";
+ ERROR("Does not appear to be a unified-diff format patch\n");
}
if ($is_patch && $chk_signoff && $signoff == 0) {
- $clean = 0;
- print "Missing Signed-off-by: line(s)\n";
+ ERROR("Missing Signed-off-by: line(s)\n");
}
if ($clean == 1 && $quiet == 0) {
projects / powerpc.git / blobdiff