ALC882_6ST_DIG,
ALC882_ARIMA,
ALC882_AUTO,
+ ALC885_MACPRO,
ALC882_MODEL_LAST,
};
SND_PCI_QUIRK(0x1019, 0xa880, "ECS", ALC880_5ST_DIG),
SND_PCI_QUIRK(0x1019, 0xa884, "Acer APFV", ALC880_6ST),
+ SND_PCI_QUIRK(0x1019, 0x0f69, "Coeus G610P", ALC880_W810),
SND_PCI_QUIRK(0x1025, 0x0070, "ULI", ALC880_3ST_DIG),
SND_PCI_QUIRK(0x1025, 0x0077, "ULI", ALC880_6ST_DIG),
SND_PCI_QUIRK(0x1025, 0x0078, "ULI", ALC880_6ST_DIG),
/* SND_PCI_QUIRK(0x1043, 0x1964, "ASUS", ALC880_ASUS_DIG), */
SND_PCI_QUIRK(0x1043, 0x1973, "ASUS", ALC880_ASUS_DIG),
SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS", ALC880_ASUS_DIG),
- SND_PCI_QUIRK(0x1043, 0x814e, "ASUS", ALC880_5ST),
+ SND_PCI_QUIRK(0x1043, 0x814e, "ASUS", ALC880_ASUS),
SND_PCI_QUIRK(0x1043, 0x8181, "ASUS P4GPL", ALC880_ASUS_DIG),
SND_PCI_QUIRK(0x1043, 0x8196, "ASUS P5GD1", ALC880_6ST),
SND_PCI_QUIRK(0x1043, 0x81b4, "ASUS", ALC880_6ST),
* and the output jack. If this turns out to be the case for all such
* models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT
* to ALC_PIN_DIR_INOUT_NOMICBIAS.
+ *
+ * The C20x Tablet series have a mono internal speaker which is controlled
+ * via the chip's Mono sum widget and pin complex, so include the necessary
+ * controls for such models. On models without a "mono speaker" the control
+ * won't do anything.
*/
static struct snd_kcontrol_new alc260_acer_mixer[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
+ HDA_CODEC_VOLUME_MONO("Mono Speaker Playback Volume", 0x0a, 1, 0x0,
+ HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Mono Speaker Playback Switch", 0x0a, 1, 2,
+ HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
/* Line In jack is connected to Line1 pin */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ /* Some Acers (eg: C20x Tablets) use Mono pin for internal speaker */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
/* Ensure all other unused pins are disabled and muted. */
{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
/* Unmute Line-out pin widget amp left and right (no equiv mixer ctrl) */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute mono pin widget amp output (no equiv mixer ctrl) */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Unmute Mic1 and Line1 pin widget input buffers since they start as
* inputs. If the pin mode is changed by the user the pin mode control
* will take care of enabling the pin's input/output buffers as needed.
};
static struct snd_pci_quirk alc260_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER),
SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013),
SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP),
{ }
};
+/* Mac Pro test */
+static struct snd_kcontrol_new alc882_macpro_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x18, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ { } /* end */
+};
+
+static struct hda_verb alc882_macpro_init_verbs[] = {
+ /* Front mixer: unmute input/output amp left and right (volume = 0) */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Front Pin: output 0 (0x0c) */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Front Mic pin: input vref at 80% */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Speaker: output */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x04},
+ /* Headphone output (output 0 - 0x0c) */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* ADC1: mute amp left and right */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* ADC2: mute amp left and right */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* ADC3: mute amp left and right */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ { }
+};
+static void alc882_gpio_mute(struct hda_codec *codec, int pin, int muted)
+{
+ unsigned int gpiostate, gpiomask, gpiodir;
+
+ gpiostate = snd_hda_codec_read(codec, codec->afg, 0,
+ AC_VERB_GET_GPIO_DATA, 0);
+
+ if (!muted)
+ gpiostate |= (1 << pin);
+ else
+ gpiostate &= ~(1 << pin);
+
+ gpiomask = snd_hda_codec_read(codec, codec->afg, 0,
+ AC_VERB_GET_GPIO_MASK, 0);
+ gpiomask |= (1 << pin);
+
+ gpiodir = snd_hda_codec_read(codec, codec->afg, 0,
+ AC_VERB_GET_GPIO_DIRECTION, 0);
+ gpiodir |= (1 << pin);
+
+
+ snd_hda_codec_write(codec, codec->afg, 0,
+ AC_VERB_SET_GPIO_MASK, gpiomask);
+ snd_hda_codec_write(codec, codec->afg, 0,
+ AC_VERB_SET_GPIO_DIRECTION, gpiodir);
+
+ msleep(1);
+
+ snd_hda_codec_write(codec, codec->afg, 0,
+ AC_VERB_SET_GPIO_DATA, gpiostate);
+}
+
/*
* generic initialization of ADC, input mixers and output mixers
*/
[ALC882_3ST_DIG] = "3stack-dig",
[ALC882_6ST_DIG] = "6stack-dig",
[ALC882_ARIMA] = "arima",
+ [ALC885_MACPRO] = "macpro",
[ALC882_AUTO] = "auto",
};
SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x161f, 0x2054, "Arima W820", ALC882_ARIMA),
+ SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
{}
};
.channel_mode = alc882_sixstack_modes,
.input_mux = &alc882_capture_source,
},
+ [ALC885_MACPRO] = {
+ .mixers = { alc882_macpro_mixer },
+ .init_verbs = { alc882_macpro_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
+ .channel_mode = alc882_ch_modes,
+ .input_mux = &alc882_capture_source,
+ },
};
if (board_config != ALC882_AUTO)
setup_preset(spec, &alc882_presets[board_config]);
+ if (board_config == ALC885_MACPRO) {
+ alc882_gpio_mute(codec, 0, 0);
+ alc882_gpio_mute(codec, 1, 0);
+ }
+
spec->stream_name_analog = "ALC882 Analog";
spec->stream_analog_playback = &alc882_pcm_analog_playback;
spec->stream_analog_capture = &alc882_pcm_analog_capture;
int board_config;
int err;
- spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
int board_config;
int err;
- spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
projects / powerpc.git / blobdiff