/* Omnikey CardMan 5121 specific RC632 transport layer
*
- * (C) 2005-2006 by Harald Welte <laforge@gnumonks.org>
+ * (C) 2005-2008 by Harald Welte <laforge@gnumonks.org>
*
* The 5121 is an Atmel AT89C5122 based USB CCID reader (probably the same
* design like the 3121). It's CL RC632 is connected via address/data bus,
#include <string.h>
#include <errno.h>
-#define DEBUG_LIBRFID
#include <librfid/rfid.h>
#ifndef LIBRFID_FIRMWARE
#include <librfid/rfid_layer2.h>
#include <librfid/rfid_protocol.h>
+#include "rfid_reader_rc632_common.h"
+
#include "cm5121_source.h"
/* FIXME */
plus 10 bytes reserve */
#define RECVBUF_LEN SENDBUF_LEN
-#define DEBUG_REGISTER
-
#ifdef DEBUG_REGISTER
#define DEBUGRC DEBUGPC
#define DEBUGR DEBUGP
return -1;
}
-#if 0
-static int TestFIFO(struct rc632_handle *handle)
-{
- unsigned char sndbuf[60]; // 0x3c
-
- // FIXME: repne stosd, call
-
- memset(sndbuf, 0, sizeof(sndbuf));
-
- if (WriteNBytesToFIFO(handle, sizeof(sndbuf), sndbuf, 0) < 0)
- return -1;
-
- return ReadNBytesFromFIFO(handle, sizeof(sndbuf), sndbuf);
-}
-#endif
-
-static int cm5121_transceive(struct rfid_reader_handle *rh,
- enum rfid_frametype frametype,
- const unsigned char *tx_data, unsigned int tx_len,
- unsigned char *rx_data, unsigned int *rx_len,
- u_int64_t timeout, unsigned int flags)
-{
- return rh->ah->asic->priv.rc632.fn.transceive(rh->ah, frametype,
- tx_data, tx_len, rx_data,
- rx_len, timeout, flags);
-}
-
-static int cm5121_transceive_sf(struct rfid_reader_handle *rh,
- unsigned char cmd, struct iso14443a_atqa *atqa)
-{
- return rh->ah->asic->priv.rc632.fn.iso14443a.transceive_sf(rh->ah,
- cmd,
- atqa);
-}
-
-static int
-cm5121_transceive_acf(struct rfid_reader_handle *rh,
- struct iso14443a_anticol_cmd *cmd,
- unsigned int *bit_of_col)
-{
- return rh->ah->asic->priv.rc632.fn.iso14443a.transceive_acf(rh->ah,
- cmd, bit_of_col);
-}
-
-static int
-cm5121_14443a_init(struct rfid_reader_handle *rh)
-{
- return rh->ah->asic->priv.rc632.fn.iso14443a.init(rh->ah);
-}
-
-static int
-cm5121_14443a_set_speed(struct rfid_reader_handle *rh,
- unsigned int tx,
- unsigned int speed)
-{
- u_int8_t rate;
-
- DEBUGP("setting rate: ");
- switch (speed) {
- case RFID_14443A_SPEED_106K:
- rate = 0x00;
- DEBUGPC("106K\n");
- break;
- case RFID_14443A_SPEED_212K:
- rate = 0x01;
- DEBUGPC("212K\n");
- break;
- case RFID_14443A_SPEED_424K:
- rate = 0x02;
- DEBUGPC("424K\n");
- break;
- case RFID_14443A_SPEED_848K:
- rate = 0x03;
- DEBUGPC("848K\n");
- break;
- default:
- DEBUGPC("invalid\n");
- return -EINVAL;
- break;
- }
- return rh->ah->asic->priv.rc632.fn.iso14443a.set_speed(rh->ah,
- tx, rate);
-}
-
-static int
-cm5121_14443b_init(struct rfid_reader_handle *rh)
-{
- return rh->ah->asic->priv.rc632.fn.iso14443b.init(rh->ah);
-}
-
-static int
-cm5121_15693_init(struct rfid_reader_handle *rh)
-{
- return rh->ah->asic->priv.rc632.fn.iso15693.init(rh->ah);
-}
-
-static int
-cm5121_mifare_setkey(struct rfid_reader_handle *rh, const u_int8_t *key)
-{
- return rh->ah->asic->priv.rc632.fn.mifare_classic.setkey(rh->ah, key);
-}
-
-static int
-cm5121_mifare_auth(struct rfid_reader_handle *rh, u_int8_t cmd,
- u_int32_t serno, u_int8_t block)
-{
- return rh->ah->asic->priv.rc632.fn.mifare_classic.auth(rh->ah,
- cmd, serno, block);
-}
-
-static int
-cm5121_rf_power(struct rfid_reader_handle *rh, int on)
-{
- return rh->ah->asic->priv.rc632.fn.rf_power(rh->ah, on);
-}
-
struct rfid_asic_transport cm5121_ccid = {
.name = "CM5121 OpenCT",
.priv.rc632 = {
.name = "Omnikey CardMan 5121 RFID",
.open = &cm5121_open,
.close = &cm5121_close,
- .rf_power = &cm5121_rf_power,
- .transceive = &cm5121_transceive,
.l2_supported = (1 << RFID_LAYER2_ISO14443A) |
(1 << RFID_LAYER2_ISO14443B) |
(1 << RFID_LAYER2_ISO15693),
.proto_supported = (1 << RFID_PROTOCOL_TCL) |
(1 << RFID_PROTOCOL_MIFARE_UL) |
(1 << RFID_PROTOCOL_MIFARE_CLASSIC),
+ .getopt = &_rdr_rc632_getopt,
+ .setopt = &_rdr_rc632_setopt,
+ .transceive = &_rdr_rc632_transceive,
+ .init = &_rdr_rc632_l2_init,
.iso14443a = {
- .init = &cm5121_14443a_init,
- .transceive_sf = &cm5121_transceive_sf,
- .transceive_acf = &cm5121_transceive_acf,
+ .transceive_sf = &_rdr_rc632_transceive_sf,
+ .transceive_acf = &_rdr_rc632_transceive_acf,
.speed = RFID_14443A_SPEED_106K | RFID_14443A_SPEED_212K |
RFID_14443A_SPEED_424K, //| RFID_14443A_SPEED_848K,
- .set_speed = &cm5121_14443a_set_speed,
- },
- .iso14443b = {
- .init = &cm5121_14443b_init,
+ .set_speed = &_rdr_rc632_14443a_set_speed,
},
.iso15693 = {
- .init = &cm5121_15693_init,
+ .transceive_ac = &_rdr_rc632_iso15693_transceive_ac,
},
.mifare_classic = {
- .setkey = &cm5121_mifare_setkey,
- .auth = &cm5121_mifare_auth,
+ .setkey = &_rdr_rc632_mifare_setkey,
+ .setkey_ee = &_rdr_rc632_mifare_setkey_ee,
+ .auth = &_rdr_rc632_mifare_auth,
},
};