X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;ds=sidebyside;f=arch%2Fmips%2FKconfig;h=6648f9b914e7f51335bd36b452a84e327c2c4959;hb=1c0c13eb935c95fd2ca0b0aca6dd4860487fb242;hp=3334a06e5973a12c47863fbf12b8611069846a87;hpb=8313da304cdb32465064202814996a2ca33f04e7;p=powerpc.git

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3334a06e59..6648f9b914 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -44,6 +44,20 @@ config BASLER_EXCITE_PROTOTYPE
 	  note that a kernel built with this option selected will not be
 	  able to run on normal units.
 
+config BCM47XX
+	bool "BCM47XX based boards"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SSB
+	select SSB_DRIVER_MIPS
+	select GENERIC_GPIO
+	help
+	 Support for BCM47XX based boards
+
 config MIPS_COBALT
 	bool "Cobalt Server"
 	select DMA_NONCOHERENT
@@ -80,10 +94,10 @@ config MACH_DECSTATION
 	  If you have one of the following DECstation Models you definitely
 	  want to choose R4xx0 for the CPU Type:
 
-	  	DECstation 5000/50
-	  	DECstation 5000/150
-	  	DECstation 5000/260
-	  	DECsystem 5900/260
+		DECstation 5000/50
+		DECstation 5000/150
+		DECstation 5000/260
+		DECsystem 5900/260
 
 	  otherwise choose R3000.
 
@@ -93,6 +107,7 @@ config MACH_JAZZ
 	select ARC32
 	select ARCH_MAY_HAVE_PC_FDC
 	select GENERIC_ISA_DMA
+	select IRQ_CPU
 	select I8259
 	select ISA
 	select PCSPEAKER
@@ -107,6 +122,20 @@ config MACH_JAZZ
 	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
 	 Olivetti M700-10 workstations.
 
+config LASAT
+	bool "LASAT Networks platforms"
+	select DMA_NONCOHERENT
+	select SYS_HAS_EARLY_PRINTK
+	select HW_HAS_PCI
+	select PCI_GT64XXX_PCI0
+	select MIPS_NILE4
+	select R5000_CPU_SCACHE
+	select SYS_HAS_CPU_R5000
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+
 config LEMOTE_FULONG
 	bool "Lemote Fulong mini-PC"
 	select ARCH_SPARSEMEM_ENABLE
@@ -125,6 +154,7 @@ config LEMOTE_FULONG
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_HAS_EARLY_PRINTK
 	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select CPU_HAS_WB
 	help
 	  Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
@@ -598,6 +628,7 @@ endchoice
 
 source "arch/mips/au1000/Kconfig"
 source "arch/mips/jazz/Kconfig"
+source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
@@ -705,6 +736,9 @@ config MIPS_BONITO64
 config MIPS_MSC
 	bool
 
+config MIPS_NILE4
+	bool
+
 config MIPS_DISABLE_OBSOLETE_IDE
 	bool
 
@@ -817,20 +851,6 @@ config EMMA2RH
 config SERIAL_RM9000
 	bool
 
-#
-# Unfortunately not all GT64120 systems run the chip at the same clock.
-# As the user for the clock rate and try to minimize the available options.
-#
-choice
-	prompt "Galileo Chip Clock"
-	depends on MOMENCO_OCELOT
-	default SYSCLK_100 if MOMENCO_OCELOT
-
-config SYSCLK_100
-	bool "100" if MOMENCO_OCELOT
-
-endchoice
-
 config ARC32
 	bool
 
@@ -1391,6 +1411,19 @@ config MIPS_MT_SMTC_IM_BACKSTOP
 	  impact on interrupt service overhead. Disable it only if you know
 	  what you are doing.
 
+config MIPS_MT_SMTC_IRQAFF
+	bool "Support IRQ affinity API"
+	depends on MIPS_MT_SMTC
+	default n
+	help
+	  Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
+	  for SMTC Linux kernel. Requires platform support, of which
+	  an example can be found in the MIPS kernel i8259 and Malta
+	  platform code.  It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY
+	  be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to
+	  interrupt dispatch, and should be used only if you know what
+	  you are doing.
+
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
 	depends on MIPS_VPE_LOADER
@@ -1853,21 +1886,6 @@ source "fs/Kconfig.binfmt"
 config TRAD_SIGNALS
 	bool
 
-config BUILD_ELF64
-	bool "Use 64-bit ELF format for building"
-	depends on 64BIT
-	help
-	  A 64-bit kernel is usually built using the 64-bit ELF binary object
-	  format as it's one that allows arbitrary 64-bit constructs.  For
-	  kernels that are loaded within the KSEG compatibility segments the
-	  32-bit ELF format can optionally be used resulting in a somewhat
-	  smaller binary, but this option is not explicitly supported by the
-	  toolchain and since binutils 2.14 it does not even work at all.
-
-	  Say Y to use the 64-bit format or N to use the 32-bit one.
-
-	  If unsure say Y.
-
 config BINFMT_IRIX
 	bool "Include IRIX binary compatibility"
 	depends on CPU_BIG_ENDIAN && 32BIT && BROKEN