X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;ds=sidebyside;f=arch%2Fmips%2Fsni%2Firq.c;h=9ccffdfb82896e436e8eaf7a35be042959f5f63b;hb=ba7cc09c9c9e29a57045dc5bbf843ac1cfad3283;hp=8511bcc6d99df00450cf5ff56b1dc5b3b248e595;hpb=b6ef977b608b01e0f338afd9445cab5436c61e00;p=powerpc.git

diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 8511bcc6d9..9ccffdfb82 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -5,6 +5,7 @@
  *
  * Copyright (C) 1992 Linus Torvalds
  * Copyright (C) 1994 - 2000 Ralf Baechle
+ * Copyright (C) 2006 Thomas Bogendoerfer
  */
 #include <linux/delay.h>
 #include <linux/init.h>
@@ -15,152 +16,34 @@
 #include <asm/i8259.h>
 #include <asm/io.h>
 #include <asm/sni.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
 
-static void enable_pciasic_irq(unsigned int irq)
-{
-	unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
-
-	*(volatile u8 *) PCIMT_IRQSEL |= mask;
-}
-
-void disable_pciasic_irq(unsigned int irq)
-{
-	unsigned int mask = ~(1 << (irq - PCIMT_IRQ_INT2));
-
-	*(volatile u8 *) PCIMT_IRQSEL &= mask;
-}
+void (*sni_hwint)(void);
 
-static void end_pciasic_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_pciasic_irq(irq);
-}
-
-static struct irq_chip pciasic_irq_type = {
-	.typename = "ASIC-PCI",
-	.ack = disable_pciasic_irq,
-	.mask = disable_pciasic_irq,
-	.mask_ack = disable_pciasic_irq,
-	.unmask = enable_pciasic_irq,
-	.end = end_pciasic_irq,
-};
-
-/*
- * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
- * button interrupts.  Later ...
- */
-static void pciasic_hwint0(void)
-{
-	panic("Received int0 but no handler yet ...");
-}
-
-/* This interrupt was used for the com1 console on the first prototypes.  */
-static void pciasic_hwint2(void)
-{
-	/* I think this shouldn't happen on production machines.  */
-	panic("hwint2 and no handler yet");
-}
-
-/* hwint5 is the r4k count / compare interrupt  */
-static void pciasic_hwint5(void)
-{
-	panic("hwint5 and no handler yet");
-}
-
-static unsigned int ls1bit8(unsigned int x)
-{
-	int b = 7, s;
-
-	s = 4; if ((x & 0x0f) == 0) s = 0; b -= s; x <<= s;
-	s = 2; if ((x & 0x30) == 0) s = 0; b -= s; x <<= s;
-	s = 1; if ((x & 0x40) == 0) s = 0; b -= s;
-
-	return b;
-}
-
-/*
- * hwint 1 deals with EISA and SCSI interrupts,
- *
- * The EISA_INT bit in CSITPEND is high active, all others are low active.
- */
-static void pciasic_hwint1(void)
+asmlinkage void plat_irq_dispatch(void)
 {
-	u8 pend = *(volatile char *)PCIMT_CSITPEND;
-	unsigned long flags;
-
-	if (pend & IT_EISA) {
-		int irq;
-		/*
-		 * Note: ASIC PCI's builtin interrupt achknowledge feature is
-		 * broken.  Using it may result in loss of some or all i8259
-		 * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
-		 */
-		irq = i8259_irq();
-		if (unlikely(irq < 0))
-			return;
-
-		do_IRQ(irq);
-	}
-
-	if (!(pend & IT_SCSI)) {
-		flags = read_c0_status();
-		clear_c0_status(ST0_IM);
-		do_IRQ(PCIMT_IRQ_SCSI);
-		write_c0_status(flags);
-	}
+	sni_hwint();
 }
 
-/*
- * hwint 3 should deal with the PCI A - D interrupts,
- */
-static void pciasic_hwint3(void)
+/* ISA irq handler */
+static irqreturn_t sni_isa_irq_handler(int dummy, void *p)
 {
-	u8 pend = *(volatile char *)PCIMT_CSITPEND;
 	int irq;
 
-	pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
-	clear_c0_status(IE_IRQ3);
-	irq = PCIMT_IRQ_INT2 + ls1bit8(pend);
-	do_IRQ(irq);
-	set_c0_status(IE_IRQ3);
-}
+	irq = i8259_irq();
+	if (unlikely(irq < 0))
+		return IRQ_NONE;
 
-/*
- * hwint 4 is used for only the onboard PCnet 32.
- */
-static void pciasic_hwint4(void)
-{
-	clear_c0_status(IE_IRQ4);
-	do_IRQ(PCIMT_IRQ_ETHERNET);
-	set_c0_status(IE_IRQ4);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause();
-	static unsigned char led_cache;
-
-	*(volatile unsigned char *) PCIMT_CSLED = ++led_cache;
-
-	if (pending & 0x0800)
-		pciasic_hwint1();
-	else if (pending & 0x4000)
-		pciasic_hwint4();
-	else if (pending & 0x2000)
-		pciasic_hwint3();
-	else if (pending & 0x1000)
-		pciasic_hwint2();
-	else if (pending & 0x8000)
-		pciasic_hwint5();
-	else if (pending & 0x0400)
-		pciasic_hwint0();
+	do_IRQ(irq);
+	return IRQ_HANDLED;
 }
 
-void __init init_pciasic(void)
-{
-	* (volatile u8 *) PCIMT_IRQSEL =
-		IT_EISA | IT_INTA | IT_INTB | IT_INTC | IT_INTD;
-}
+struct irqaction sni_isa_irq = {
+	.handler = sni_isa_irq_handler,
+	.name = "ISA",
+	.flags = IRQF_SHARED
+};
 
 /*
  * On systems with i8259-style interrupt controllers we assume for
@@ -169,14 +52,31 @@ void __init init_pciasic(void)
  */
 void __init arch_init_irq(void)
 {
-	int i;
-
 	init_i8259_irqs();			/* Integrated i8259  */
-	init_pciasic();
-
-	/* Actually we've got more interrupts to handle ...  */
-	for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_ETHERNET; i++)
-		set_irq_chip(i, &pciasic_irq_type);
-
-	change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ2|IE_IRQ3|IE_IRQ4);
+	switch (sni_brd_type) {
+	case SNI_BRD_10:
+	case SNI_BRD_10NEW:
+	case SNI_BRD_TOWER_OASIC:
+	case SNI_BRD_MINITOWER:
+	        sni_a20r_irq_init();
+	        break;
+
+	case SNI_BRD_PCI_TOWER:
+	        sni_pcit_irq_init();
+	        break;
+
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        sni_pcit_cplus_irq_init();
+	        break;
+
+	case SNI_BRD_RM200:
+	        sni_rm200_irq_init();
+	        break;
+
+	case SNI_BRD_PCI_MTOWER:
+	case SNI_BRD_PCI_DESKTOP:
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        sni_pcimt_irq_init();
+	        break;
+	}
 }