X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;ds=sidebyside;f=arch%2Fppc%2Fplatforms%2F4xx%2Focotea.c;h=f841972f1fa9204238a49dd841c70839601d46c6;hb=2ef9481e666b4654159ac9f847e6963809e3c470;hp=80028df1b445b422ece4a9edfc02186b8aced50e;hpb=32983696a48a6c41d99f3eca82ba7510a552d843;p=powerpc.git

diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index 80028df1b4..f841972f1f 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -1,6 +1,4 @@
 /*
- * arch/ppc/platforms/4xx/ocotea.c
- *
  * Ocotea board specific routines
  *
  * Matt Porter <mporter@kernel.crashing.org>
@@ -28,7 +26,6 @@
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <linux/initrd.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/tty.h>
@@ -53,7 +50,7 @@
 #include <syslib/gen550.h>
 #include <syslib/ibm440gx_common.h>
 
-bd_t __res;
+extern bd_t __res;
 
 static struct ibm44x_clocks clocks __initdata;
 
@@ -249,8 +246,8 @@ ocotea_early_serial_map(void)
 	port.irq = UART0_INT;
 	port.uartclk = clocks.uart0;
 	port.regshift = 0;
-	port.iotype = SERIAL_IO_MEM;
-	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.iotype = UPIO_MEM;
+	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	port.line = 0;
 
 	if (early_serial_setup(&port) != 0) {
@@ -287,6 +284,15 @@ ocotea_setup_arch(void)
 
 	ibm440gx_tah_enable();
 
+	/*
+	 * Determine various clocks.
+	 * To be completely correct we should get SysClk
+	 * from FPGA, because it can be changed by on-board switches
+	 * --ebs
+	 */
+	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+	ocp_sys_info.opb_bus_freq = clocks.opb;
+
 	/* Setup TODC access */
 	TODC_INIT(TODC_TYPE_DS1743,
 			0,
@@ -325,25 +331,7 @@ static void __init ocotea_init(void)
 void __init platform_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7)
 {
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	ibm44x_platform_init();
+	ibm44x_platform_init(r3, r4, r5, r6, r7);
 
 	ppc_md.setup_arch = ocotea_setup_arch;
 	ppc_md.show_cpuinfo = ocotea_show_cpuinfo;